Help!!!!!!!!

[enginepower]

I have a Powercolor 9600xt 128mb Ultra and I have flashed my bios with the Hynix version (which is what my mem has) of the bios file on this site and it won't even get a post beep now even if a pci vid card is in system at same time. Any help on sending old bios file back to card. I have the orginal bios file. It's too late now but looking at the bios file on a notepad shows garbled stuff but i see "9600xt DV samsung" and i have hynix so yes, wrong bios file. :mad:

[wazzledoozle]

Dont make Titles such as "Help", or "Help me"



Put the pci video card in, and take out the AGP card. Go into bios, and set the video to initialize in PCI. Turn off comp. Put AGP card back in, leave pci card in. Turn computer on. Good luck.

[enginepower]

I was able to reprogram it back to original bios using method you suggested. Sometimes we overthink the obvious answer when under pressure. Thanks again.