0.0.23 beta 10

[W1zzard]

- Logo is shown in the main window when temp. monitoring is inactive
- Fixed broken X800SE temp. monitoring
- Added save file dialog to dump bios
- Added support for M28, R430, R480, R423GL
- Added temp. monitoring option "show default icon in tray"
- Added hw monitoring support for Abit uGuru (AA8, AG8, AI7, AN7, AS8, AV8, KV8)
- Added support for Abit RX600

[oggy]

hmm can u add disable log option in the setting?
coz i think many ppl don need it

[Ex0skelet0r]

wizzard when i click hardware monitoring the program still crash. (i have 3D Club Radeon 9600 pro, Gigabyte GA-8SQ800, Pentium 4@1,5ghz,512mb DDR SDRAM, Windows XP PRO SP1)

[wazzledoozle]

(twittles thumbs)

I see W1zzard that you have inserted a logo.

:rolleyes:

[DragonKnight2k]

- Added hw monitoring support for Abit uGuru (AA8, AG8, AI7, AN7, AS8, AV8, KV8)


thats all good and all but could you add support for Gigabyte`s GA7NNXP motherboard please, you did add gigabyte monitoring for some motherboards but not mine.

cheers.

[zodden]

Something has changed with X800 detection? This version, as opposed to 23 beta 9, is much closer to what I have been running the X800 in games and benches as my max overclock. In fact its so close that I have decided to just run what the tool is showing as my max OC.

Great job!

[W1zzard]

wizzard when i click hardware monitoring the program still crash. (i have 3D Club Radeon 9600 pro, Gigabyte 8SQ800, Pentium 4@1,5ghz,512mb DDR SDRAM, Windows XP PRO SP1)

what monitoring chip does that board use? everest will tell you

[Ex0skelet0r]

SiS 655. is that what you want?

[acrowley23]

Something has changed with X800 detection? This version, as opposed to 23 beta 9, is much closer to what I have been running the X800 in games and benches as my max overclock. In fact its so close that I have decided to just run what the tool is showing as my max OC.

Great job!

use old scanning methode on x800! works 100 % fine

[acrowley23]

mh...added support for r480...this x800xt update isnt released ai the monent ?
Should coming this year...

But not so interesting....only a little perfomance update...bigger chip R5xx with shader3 is coming next year (Germany at CBit in may i think so)

[W1zzard]

exo thats the motherboard chipset .. i need the monitoring chip ..

[FakeTheFake]

for that matter:

board: ASUS A8V Deluxe
chip : Winbond W83627(T)HF ISA

thanx
c

[W1zzard]

for that matter:

board: ASUS A8V Deluxe
chip : Winbond W83627(T)HF ISA

thanx
c

that monitoring chip is supported .. what errors are you getting?

[FakeTheFake]

that monitoring chip is supported .. what errors are you getting?
uhm...my fault, sorry! I overlooked it in the list. :o
the voltages weren't correct but now they are fine. no errors...

[WiD26]

I get Init of findmax:subsequent images are different.please report thids bug.

I have a X800pro ati build,and i got this message with find max core.

Edit:after a reinstal of ati-tool,every thing works fine again.

[madmaca]

Any news on solving the 3d Detection / AMD64 issue - wherby it stops IE etc. from working if 3D Detection is enabled? I have seen the exception list - is there something in there I can put to ignore all of these apps affected by this (IE, Outlook + others etc.) or will I have to add them all individually.

madmaca.

[W1zzard]

Any news on solving the 3d Detection / AMD64 issue - wherby it stops IE etc. from working if 3D Detection is enabled? I have seen the exception list - is there something in there I can put to ignore all of these apps affected by this (IE, Outlook + others etc.) or will I have to add them all individually.

madmaca.

i thought thats fixed ..

[nimol]

I`ve got a uguru clock, I`m being even denser than usual I think and can`t see how it fits in with AtiTool. Can someone explain please

[spiderman]

Just installed the beta 10 and was trying to set up all the parameters. ATI-tool crashes on me once I start trying to open the hardware monitoring. (Tried several times each time the same issue)

Asus A8V, Athlon 64 3500, Radeon 9800 XT, MBM5 and Speedfan 1.17 running in parallel to ATItool. ATI 4.10 driver set running. - Anyone confirmations?

Will continue to single out more details on the cause - over the week-end.

Greetings

[USSJ4Brolli]

There seems to be an error in the new scanning method, for beta 10 (this one). In this version, scanning for artifacts for the memory (like, doing the max mem thing) it will just continue to go up, not detecting anything. When even artifacts are vizible to the naked eye. When going to the "old" scanning methed, it is now fixed and detects the artifacts correctly. In beta 9, this "error" didnt accure. For info on my card, its:

Visiontek Radion 9100 128mb (r200) (its a pci card)
Device ID: 514D

If wondering what Cats im using, i am using the DNA-Drivers 3.4.4.11

Thank you for the support, and keep up the exelent work on the ATI Tool.

[spiderman]

Hello, I'm back again,

Now I have permutated the dependencies. It is obviously the case, that ATItool hardware monitring function does not go together with Speedfan 1.17. Apparently the try to get information fom the monitoring chip and interfere with eachother.

Plainly running the two programmes beside eachother has not resulted in problems yet, so I believe it has to deal with the way how the hw monitoring is read out once the function is called up.

Greetings

[Ex0skelet0r]

Wizzard i have:
Motherboard Name Gigabyte 8SQ800 Series
Sensor Type ITE IT8705F (ISA 290h)

Look at the log file also:

2004-10-31 20:22:08 ATITool v0.0.23 started.
2004-10-31 20:22:08 Detected GPU Chip: RV350 (4150), 4 Pipelines, 128 MB
2004-10-31 20:22:08 Temperature monitoring: not supported



i hope that helps

[madmaca]

i thought thats fixed ..

Not here - with AtiTool 0.0.23 running - none of my MS Office or IE apps will run unless I exclude them in the new exclusions list (or shut down AtiTool).

Just noticed it is not only on my AMD64 setup either. It's the same on my P4 :confused:

Something I am doing wrong?

madmaca.

[mynewced]

Hello,

I recently installed the latest ASUS AX800 XT/TVD. My intention is to have a noiseless PC, so I need to control the speed of the fans.
The BIOS does manage all CPU and motherboard fans, but does not manage graphic cards fans.

So I installed SmartDoctor but it crashes the computer (blue screen). So I installed ATITool 0.0.23 beta 10.
I don't see any Fanspeed options in the setup screen.

Is it normal?

C.

[a1ka1ine]

Hello,

I recently installed the latest ASUS AX800 XT/TVD. My intention is to have a noiseless PC, so I need to control the speed of the fans.
The BIOS does manage all CPU and motherboard fans, but does not manage graphic cards fans.

So I installed SmartDoctor but it crashes the computer (blue screen). So I installed ATITool 0.0.23 beta 10.
I don't see any Fanspeed options in the setup screen.

Is it normal?

C.

asus released a new bios which stops the blue screen problems - i had this problem too and it was fixed with the new bios. but yeh, fan control would be a nice feature :)

[mynewced]

asus released a new bios which stops the blue screen problems - i had this problem too and it was fixed with the new bios. but yeh, fan control would be a nice feature :)

Thank you!

I must be blind but I don't see any BIOS to download from the ASUS website:
http://www.asus.com.tw/support/download/item.aspx?ModelName=AX800%20Series&Type=All

Where did you find this BIOS update?

C.

(sorry to now be out of the topic subject)

[W1zzard]

Not here - with AtiTool 0.0.23 running - none of my MS Office or IE apps will run unless I exclude them in the new exclusions list (or shut down AtiTool).

Just noticed it is not only on my AMD64 setup either. It's the same on my P4 :confused:

Something I am doing wrong?

madmaca.

does your card follow the standard x800 layout with an lm63 monitoring chip? or does asus use a special chip again?

[madmaca]

does your card follow the standard x800 layout with an lm63 monitoring chip? or does asus use a special chip again?

They are 9800Pro's in both machines. One Hercules and one Saphire. Does this help? Is this version only for X800s?

madmaca.

[mynewced]

does your card follow the standard x800 layout with an lm63 monitoring chip? or does asus use a special chip again?

FAN CHIP:
http://www.pcmister.com/news.asp?newsID=5544
shows a "standard" LM63.

I see you alse said (http://www.techpowerup.com/articles/overclocking/vidcard/94) that ASUS may also use another kind of chip.

I'll check my card...


BIOS UPDATE:
The latest BIOS I can find (August 16th) is the following one:
"Asus X800 XT PE (AGP) 256 MB May 11th 2004 4:19 PM Aug 16th 2004 8:38 AM 520 / 560
Samsung 1.6"
from the http://www.techpowerup.com/bios/ page

Is there any newer?

C.

[richieroro]

if i change the pci latency to 128... do i have to startup atitool on boot for it to to stay at 128 or does it add a registry key or somthing...

[howie]

Could you add support for the ASUS A7N8X2 mainboard?? Not in the list.. Thanks, great app

[a1ka1ine]

Thank you!

I must be blind but I don't see any BIOS to download from the ASUS website:
http://www.asus.com.tw/support/download/item.aspx?ModelName=AX800%20Series&Type=All

Where did you find this BIOS update?

C.

(sorry to now be out of the topic subject)

sorry i thought you had the EAX (pcie right?). if you have the pcie eax then this is the bios you need:

http://www.asus.com.tw/support/download/item.aspx?ModelName=EAX800%20Series&Type=All

[mynewced]

sorry i thought you had the EAX (pcie right?). if you have the pcie eax then this is the bios you need:

http://www.asus.com.tw/support/download/item.aspx?ModelName=EAX800%20Series&Type=All

You are right! I missed the "E".
Thanks a lot! I try that.

(It still does not explain why ATITool does not display the "Fan control" option in the setup)

C.

[air_ii]

Great work with the prg so far, W1zzard! I've seen that you can change the FSAA and AF settings if you right-click on the ATITool tray icon. Would it be possible to add application based selection (turn it on for older games, where you can't do it in the game, but not permanently)? Or just the way you can choose profiles with the difference that here you have to list exes where you want the feature to work (unlike in 3d detection)?

[wazzledoozle]

nvm...

[tlogank]

I have never done anything with overclocking, but I just used this tool to find the Max Memory and Max Core...I am using an ATi X800SE PCI-express card. Will it be safe for me to always use the Max settings that this card finds when gaming? Will it be safe from not burning up? Just curious, sorry for the noob question.

[papashex]

FYI : uGuru monitoring does not appear to work in beta 10. My Abit AV8 reads back all voltages as "X" RPM.

[YawAKooL]

Hey all I didnt read the 4 Pages before but I hope you can help me... Since the beta 009 I cant change 2D Clocks, it always runs with full speed which isnt good for my card. Is there an option for it???

[trickson]

WOW thank you for the new ATI tool !!! YOU are great !!!!

[Masterblaster]

I can not find the "increase pwm frequency" option that was introduced with beta2, where can I find it ?

[W1zzard]

I can not find the "increase pwm frequency" option that was introduced with beta2, where can I find it ?

removed again .. it did not work properly

[Erroneus]

removed again .. it did not work properly

Any plan on trying to add again, if it's possible to get it working?

[YawAKooL]

Any way to set 2D/3D Profiles???

[Erroneus]

Any way to set 2D/3D Profiles???
Settings -> 3D Detection

[YawAKooL]

Aaaah big thx!!

[Ex0skelet0r]

wizzard does atitool support my chip? (i have write it in a previous page)

[mR Yellow]

@ Wizzard or anyone who knows,

Ive got a ASUS x800pro (non vivo). I flashed the card with x800xt bios (after connecting the lasercuts).

The device ID b4 flash is 4A49 (using ATI Tool)
The device after flash still reads as 4A49 (using ATI Tool)

But if i use rabit to check out the bios it reads 4A50? :confused:

http://img.photobucket.com/albums/v313/jakogvp/mR%20Yellow/Rabit.jpg

BTW i wasn't able to unlock xtra pipes. ATI tool still reads it as 12.
So maybe their is some other hardware lock. That doesn't allow u to change device ID even when the bios ID reads as 4A50!

Any insight will be appreciated

[INSTG8R]

wizzard does atitool support my chip? (i have write it in a previous page)

Yeah its a 9600 or a variant of it and the Tool supports it just fine

[opium]

@ Wizzard or anyone who knows,

Ive got a ASUS x800pro (non vivo). I flashed the card with x800xt bios (after connecting the lasercuts).

The device ID b4 flash is 4A49 (using ATI Tool)
The device after flash still reads as 4A49 (using ATI Tool)

But if i use rabit to check out the bios it reads 4A50?

ATI RADEON X800 Pro VIVO > X800 XT BIOS FLASH GUIDE - Courtesy of Paddy007UK

*************************************************

Equipment & files required

2 x floppy discs

DrDos boot disk creator: HERE (http://paddy007uk.freeservers.com/VGAbios/drdflash.exe)

FlashROM 2.37 + floppy creator: HERE (http://paddy007uk.freeservers.com/VGAbios/Flasher+Floppy2.37.exe)

Gigabyte Flash utility & X800 XT BIOS: HERE (http://paddy007uk.freeservers.com/VGAbios/GigFlashx800xt.rar?sort_by_this_column=5,0&at_a_time=50)

Retail ATI X800 XT BIOS: HERE (http://paddy007uk.freeservers.com/VGAbios/X800XT.bin)


**BEFORE FLASHING THE BIOS, MAKE SURE YOU MAKE A BACKUP OF YOUR OLD ONE**


*************************************************

To back up your BIOS: (Floppy 'A')

(a) Create a bootable floppy disc with flashrom on it by double clicking the Flasher+Floppy2.37.exe.

(b) Restart the PC with the floppy disc inserted & boot in DOS.

(c) Once activity has ceased you will be at the A:\ prompt, type the following command line to back up your existing BIOS:

flashrom -s 0 backup.bin

You now have a file on the floppy disc named 'backup.bin' this is your original BIOS which you may require at a later date.

(d) Remove the floppy disc & reboot the PC.

*************************************************
To flash to the Gigabyte X800XT BIOS for enabling the 4 locked pipelines (Floppy 'B')

(a) Create a bootable floppy disc by double clicking the DrDos boot disc creator.

(b) Unzip the Gigabyte Flash utility & X800 XT BIOS, then place the files on the floppy disc.

(c) Restart the PC with the floppy disc inserted & boot in DOS.

(d) Once activity has ceased you will be at the A:\ prompt, type the following command line to flash the BIOS:

GVF11 -p -f A:\r80x256v.f1

(e) Remove the floppy disc & reboot the PC.

************************************************** *

To flash to the ATI Retail X800 XT BIOS, for improved over clock (Floppy 'A')

(a) Insert floppy disc 'A' into into the floppy drive (leaving existing files in tact).

(b) Place the file downloaded Retail ATI X800 XT BIOS ( X800XT.bin ) on to the floppy.

(c) Restart the PC with the floppy disc inserted & boot in DOS.

(d) Once activity has ceased you will be at the A:\ prompt, type the following command line to flash the BIOS:

flashrom -p -f 0 X800XT.bin

(e) Remove the floppy disc & reboot the PC.

************************************************** **

I recommend you retain the 2 floppy discs for future use.

If you have followed the instructions carefully you should have a fully fledged ATI Radeon X800 XT 520mhz core / 560mhz memory.

Due to the heat generated by the additional 4 pipelines your maximum core over clock is likely to be reduced by on average 20mhz.


Do it correctly and you will have a full working 16 pipes

[richieroro]

thats for the pro VIVO... the NON-VIVOs are hardlocked so you will not be able to unlock the pipes via a softmod.

[opium]

thats for the pro VIVO... the NON-VIVOs are hardlocked so you will not be able to unlock the pipes via a softmod.

he already connected the laser cuts

[Head]

I think that instead of the only graphic of the temperaure, will be usefull even a function that passing the mouse over the line indicates the temperature of that moment, like asus probe recording for example.
And perpahps also a function that show the core temperature in game! Like fraps show fps...
You decide one of the four angle, and atitool show the temperature. But only if one decides to see it!
There are games like CS that (i think) recognize some overlayed effect or numbers like cheats! It's happened to be banned for having the control of mp3 during the game!!! :)

[H2VO]

sorry for sounding like a noob, but in Settings/Miscellaneous/Catalyst A.I level, do i need the Catalyst CCC in order for the "Catalyst A.I" function to work? i'm using the old Control Panel and wanted to make sure there's no conflict. thanks in advance. :)

[sanderh]

hi all,

i a newbie on the forum so please forgive me thistime if this question has been asked earlier before :o

When i run the ati tool (i did read the manual) and run find max core my system is now busy for more than 3 hours :eek: and the core is now almost 200 more :confused: with still no errors found......

What could be the problem?

my specs are:
p4 3.2 extreme edition, 512 mbddr2 and a Radeon x600 pro (0x3E50) 128mb

[Cynips]

do i need the Catalyst CCC in order for the "Catalyst A.I" function to work?
Nope, that's exactly why ATITool is so nice. You can use it instead of CCC to set AI.

[H2VO]

Nope, that's exactly why ATITool is so nice. You can use it instead of CCC to set AI.

okay, thanks dude. :)

[ARTOSOFT]

Hi,

Is there any guideline to setup CCC to work best with ATITool?
Should I turn off AI on CCC?

Thank you in advance.

Best regards,
Arto

[99999]

hmm can u add disable log option in the setting?
coz i think many ppl don need it

agreed :mad:

[0janvier]

HI
I use a all in wonder 9800 se (256 bits) not overclocked but with the 8 pipeplines (thanks Power Up).
With the last stable version or Atitools, no artifact and 400(average) with the beta version!
I disabled the Fast write AGP in the bios: no change.
Find max core and find max mem return values less than the default one...
Testing in games the default value( 378/297) didn't show visibles artifacts.
:confused:

[YawAKooL]

HI
I use a all in wonder 9800 se (256 bits) not overclocked but with the 8 pipeplines (thanks Power Up).
With the last stable version or Atitools, no artifact and 400(average) with the beta version!
I disabled the Fast write AGP in the bios: no change.
Find max core and find max mem return values less than the default one...
Testing in games the default value( 378/297) didn't show visibles artifacts.
:confused:

Quite the same for me! I Have a 9700 Pro (325/310), and if I scan for artifacts with ATI-Tool at default I get many. If I check in Games or all the 3dMarks and Aquamark, I don't see any. If I scan for artifacts using ATI-Tray-Tools, I don't get any artifacts, too!

[W1zzard]

any difference if you use the new scanning method or the old one ? (its in the settings)

[YawAKooL]

Yeah, and difference when using different drivers. In the old scanning Method there are yellow pixels in the lower right corner, in the new a line in the upper right corner. With driver change the direction of the errors changes a bit.

[alex-the-cat]

I'd like to "OC" my card's Samsung 1.6ns memory to it's "Offical" rating which is 600Mhz with ATITool.
Could anyone pls tell me what ram timming parameters should i use?

[Masterblaster]

@W1zzard:

With my 0023 beta 10
there is this problem: After coming back to windows from the suspend to ram mode the customized fan speeds are deleted so you have to set them manually again. It is really annoying.

Where are the values saved (reg. ini) ?
Any idea to fix it?

[pierrick30]

May I suggest to add a "VPU RCOVER"-like fature?
when I OCing its quite unerving if I have to reboot my computer each time I set too high frequencies or too low timings.

[pierrick30]

@Alex
i got the same memory and im interresed too.
I found this data sheet http://www.samsung.com/Products/Semiconductor/GraphicsMemory/GDDR3SDRAM/256Mbit/K4J55323QF/ds_k4j55323qf_rev13.pdf
I think it is what we are looking for but it is a little too complicated for me.
If anyone couuld help us he will be welcome

[Spyder187]

@W1zzard:

With my 0023 beta 10
there is this problem: After coming back to windows from the suspend to ram mode the customized fan speeds are deleted so you have to set them manually again. It is really annoying.

Where are the values saved (reg. ini) ?
Any idea to fix it?

I found the same problems, after coming back from the "Sleep" mode, I was wondering the first time how come my gpu temps were higher.

Thanks W1zzard for ATiTool btw~

[W1zzard]

are the fan speeds 0 ? or the card's dynamic default values?

[Spyder187]

They are the card's default speeds. Yeah the dynamic default values.

[pierrick30]

what is the point of an Ram timing editor if the modifications CAN'T be saved?

[dontcare11]

Why can't I use temp monitoring? I have a saphire radeon 9800 pro. Chiptype R350. Is this chiptype still not included in this beta? I really want to be able to control the speed of my fan. Thanks

Edit: If I flash my bios to a radeon 9800 xt will I be able to adjeust the fan because of a chipset change?

[YawAKooL]

You can't, you can't, you can't and you will never be able to do so! Only R360 with a sensor can do so.

[W1zzard]

what is the point of an Ram timing editor if the modifications CAN'T be saved?

to find out if ram timings work (on atitool side and on your card's side) .. they will be able to be saved in one of the next versions .. dont worry

[opiants]

W1zzard:

pls put temp warning feature

[proevo]

Hi i have connect3d provivo modded to xt800xtpe and when using the beta version i get lots of artifacts all the time but when using the last stable version no problems ,,could the the beta version have a bug of some sorts(i have sp2 installed). when i run 3dmark 2005 i dont see any artifacts

[pierrick30]

ati tools artifact detection is not fully reliable on the stable version
just imagine on the beta version...

[proevo]

In that case i would say that artifact detection is not reliable at all on atitool because i did run 3dmark 2005 3 times in a loop and all the tests i made on atitool and 3dmark2005 were at default clock speeds 520/560 and like i said 3dmark run perfectly with no visible artifacts at all and atitool reported artifacts immediately after clicking the scan button

[W1zzard]

In that case i would say that artifact detection is not reliable at all on atitool because i did run 3dmark 2005 3 times in a loop and all the tests i made on atitool and 3dmark2005 were at default clock speeds 520/560 and like i said 3dmark run perfectly with no visible artifacts at all and atitool reported artifacts immediately after clicking the scan button

tell us more about your configuration .. this shouldnt happen .. any difference if you use the old scanning method?

[alex-the-cat]

@Alex
i got the same memory and im interresed too.
I found this data sheet http://www.samsung.com/Products/Semiconductor/GraphicsMemory/GDDR3SDRAM/256Mbit/K4J55323QF/ds_k4j55323qf_rev13.pdf
I think it is what we are looking for but it is a little too complicated for me.
If anyone couuld help us he will be welcome

It's not just too complicated for us but too complicated for everyone because there are two sets of parameters that have same labels. e.g. there is a MEM_TW2R with "3 clocks" value at the top of the list and there is also a MEM_TW2R with "1 clocks" value at the bottom of the list.
So, even if we're professional enough to decode the data sheet and figure out what parameters should be set, we're not able to do so because of the fore-mentioned reason.

[proevo]

w1zzrard youre right.when using old scanning method everything is normal as in the stable version.i have connect3d x800pro flashed to connect3d x800xt pe(still with stock cooling),amd xp2600,msi746f ultra motherboard and 1 gig of memory,but whats the difference with new and old scanning method

[W1zzard]

w1zzrard youre right.when using old scanning method everything is normal as in the stable version.i have connect3d x800pro flashed to connect3d x800xt pe(still with stock cooling),amd xp2600,msi746f ultra motherboard and 1 gig of memory,but whats the difference with new and old scanning method

the new scanning method should still work .. what drivers are you using? settings?

[proevo]

W1zzard, i am using newest omega drivers with application preference settings with fast writes turned off

[W1zzard]

try without omega drivers and let me know of your results :)

[proevo]

allright ill get back tomorrow

[proevo]

i did already what you asked ,Did run driver cleaner first then installed ati drivers but now i get artifacts with both old and new scanning method and 3dmark runs smootly without any faults and did get a decent score too but this really puzzles me now, tried running few games too(hl2,Vampire..bloodlines) and i did not see anything wrong within the games either

[W1zzard]

what if you reduce the clocks by, say 100 mhz each?

[proevo]

Hi w1zzrard now this is getting really weird.First i went back to the old stable version to test and passed without problems then upgraded to beta and still problems haunted me . when i started scanning it began immediately to show errors ,stopped testing closed atitool started it and tested again for 8 times one test worked, no artifacts,no problems i am starting to believe that i have some sorts of compability issue with my hardware(forgot to mention that the errors i have are big while testing ,large pixel errors that cover 1/4 of the testing image which makes be believe if i really had these errors they should be seen while playing games) and reducing clock rates doesnt help, same thing happens

[Malenko]

just wondering with the heating up phase of the overclocking, y is it that if u click on the graphic with the cube floating around that it increases the heat up time by 5 seconds?, and when it isnt in the heat up phase and u click on it it goes into a 5 second heat up phase, i am just wondering as to y this in there or if it is a bug or something

[Malenko]

if i choose to do find max memory first should i go back to default memory and then do find max core? or can i leave the mem at a few mghz below the max and then do max core, i am just wondering if it will find a lower max core due to the additional heat produced by the memory allready being overclocked?

[W1zzard]

atitool 0.0.23 final released:

http://atitool.techpowerup.com/ATITool_0.0.23.exe