Build 702

[infrared]

Running on my P5WD2 Premium

the cpu overclocking works at first, the motherboard is detected corrected on first launch etc

Broblems begin after a few uses. the cpu overclocking stops working, and becomes unstable. And if the program is closed, then re-opened, my computer crashes instantly.

Coming along nicely ;)

[chesley96]

I am on an Intel D945GPM w/ a Pentium D 915 2.8Ghz w/4Mb L2, and a Sapphire x1800 xt, My clock generator is a IDTCV115PVG. My pc also crashes while opening systool build 702 for the second time.....I can only get my cpu to 3.1Ghz, any higher of a clock results in my pc totally freezing up,well at least my mouse and keyboard stop working for sure. The CPU temp only hits a max of 65 Degrees Celsius, It used to run at about 71c max before i reapplied my thermal paste.

P.S. Im on Windows Xp Home w/SP2 and all updates

[envoid]

Dell Optiplex GX620 with P4 2.8 on 945 chipset and 4x 256MB PC4200. Load Systool once, everything ok. Try after that (with or without tweaks set before), systool crashes the PC with a PFN_List_Corrupt.

[kush]

nvm me, should start a thread for ver 711..oops