what abouts should I be scoring(3dmark) with this crossfire and E6600?

[W2hCYK]

i got one X850XT (which i will hopefully OC to PE speeds, or higher) and an X850XT PE Crossfire Card (which I also plan to OC) and an E6600 conroe, probably @ 3.5GHz when i get it going..

so say... 560/600 for both gfx cards, and 3.5GHz on the E6600..

what do you think it would score in 05 and 06?

my previous setup with a P4 3GHz 'E' 478 @ 4GHz and X800XT PE on AGP scored me 7328 in 05.. 600/600, voltmodded, then killed the card :cry: good card..

im expecting something like 10k in 05? idk..

**ps. when do you guys think 07 will be out? :-D DX10 most likely.

[Ketxxx]

anywhere around 10-12k id think.

[INSTG8R]

Dunno really Im getting around 9k or so on my rig on High Quality settings.(now I have RMA'd the CF card and expect a new one shortly, it was flickering badly in CF mode so was either the Dongle or the outputs on the card not too mention I think it actually killed my LCD, again RMA'd.)

[Pinchy]

Whoa howd you get 7328 in ur old rig :p

i basically got the same system, just without the cpu at 4ghz, and the x800 at 540/560...but i only get 3-4k :cry:

[dolf]

Whoa howd you get 7328 in ur old rig :p

i basically got the same system, just without the cpu at 4ghz, and the x800 at 540/560...but i only get 3-4k :cry:

I have P4 3.0GHz FSB 800, ASUS P4C800E-Delux, 2x512 MB Kingston HyperX dual channel kit CL2 (2-3-2-6), X800XT PE (sold) currently X850XT PE, Seagate Baracuda 7 - 7200, 8MB.

Without overclock my results are:

X800XT PE, 3Dmark03 - app. 12000-12100; 3Dmark05 - app. 5700-5800
X850XT PE, 3Dmark03 - app. 12400-12500; 3Dmark05 - app. 6000-6100

P4 3.0GHz overclocked to 3.6GHz:

X850XT PE, 3Dmark03 - app. 12400-12500; 3Dmark05 - app. 6100-6200
X850XT PE, 3Dmark03 - app. 13000-13100; 3Dmark05 - app. 6400-6500

Both cards overclocked: X800XT PE OC to 560/600 and X850XT PE to 560/600 give another 200-400 points deppending of the CPU.

[W2hCYK]

i did a loooong long time of fine tuning and tweaking. I was nearing 6.75gb/s RAM bandwidth @ 1:1 263MHz @ 2.5-4-4-8 on my GeIL RAM. I tweaked video card RAM timings and overclocked/overvolted them with pencil mods. had the core voltage at I think 1.68v. What stopped the card was my error in soldering, and smooshing all the solder points and ripping traces when i sneezed.. *owned*

I have the 3DMK file if anyone wants it to see where to improve anything.. its on my desktop so if you want it, i'll send it to you on friday.