3R BLUE LIGHT new mod

[pt]

Hi
this is my old case: http://www.techpowerup.com/gallery/258, as some of you will notice the side is bad cutted, and the window has glue on it
I and a friend are going to mod it to make a good looking window on it, as well as some intake fans (original had none), we are just going to do the case mod to put a future lanparty pc inside since the case is very lightweight 2kg without everything

Do you have any suggestions for this mod?
colors, window size, everything :D

[pt]

Doe anyone know how to paint a case?, i'm thinking of doing it, but i don't know how
:confused:

[pt]

photos of the murdered case:
http://img.techpowerup.org/060909/1.jpg

http://img.techpowerup.org/060909/3.jpg

Tools table

http://img.techpowerup.org/060909/2.jpg

[-Thrilla-]

To paint a case, reflective car style:
Sand the old paint down, by the looks you already did.
Give it a layer of metal primer.
Spray a thin layer of base coat, doesn't have to cover everything completely, just a very thin layer. Let dry.
Spray a 2nd layer, you may cover the rest where there is no paint, by this layer, no more trace of primer should be seen. Let dry.
Spray a third layer, let dry, and look for orange peels. Using fine grit (1400ish) sandpaper with water to get rid of them, rinse often.
If everything looks alright, do the same with clear coat.

That's just a simple procedure, hope it helps.

[pt]

the case hasn't been sanded, it's aluminium not painted, do i have to sand it?
btw, does anyone saw my 3.5' bays? :D

[Slater]

photos of the murdered case:
*GASP*

That's a little to graphic man

Thanks, now I'm traumatized for the rest of my life

[-Thrilla-]

Since it's bare metal, you can clean it with some medium (alcohol, paint thinner, etc) and start with the primer, and make sure you let each layer dry completely before moving on to the next, it might take you a week to finish but you'll like the result.

[pt]

here is the initial case:
http://www.systemcooling.com/3RSystems_R103-01.html
it's "brushed" aluminium

sry Slater :p

[pt]

here is the side already cutted and sanded, most of the case has been sanded

it's reflective :)
http://img.techpowerup.org/060920/1 001.jpg
http://img.techpowerup.org/060920/1 002.jpg


More updates soon

[-Thrilla-]

Still a bit rough by the pics, you want to be able to run your finger on the edge with 1lb of presure without getting a cut.

[pt]

Still a bit rough by the pics, you want to be able to run your finger on the edge with 1lb of presure without getting a cut.

it was done with paper sand not with a machine, the pics aren't very good too, but i will probabily sand it a bit more :)

[devinXkillyou]

i just have one question. how do u like your TT Silent Tower cpu cooler? how well does it perform? my tt volcano is loud as hell, i need something quieter.

[pt]

i just have one question. how do u like your TT Silent Tower cpu cooler? how well does it perform? my tt volcano is loud as hell, i need something quieter.

i sold my silent tower a few months ago, when i changed to am2 (it was not compatible) i now have the stock cooler, my friend (i sold him the cooler) says that it's on the hot days of summer never reached 60ºc under full load, and since the temps are down it hasn't reached to 50ºc, it has a 120mm fan in it (21db), if you could lap the cooler it will give a better performance than above, wich is your cpu?

[pt]

btw, this is my old system:
http://www.techpowerup.com/gallery/258

the pc i sold with the hardware of the above:
http://www.techpowerup.com/gallery/308

the pc where the cooler is:
http://www.techpowerup.com/gallery/366

and my current system: (it has been modified a bit more after this pics)
http://www.techpowerup.com/gallery/308

the cpu of my friend is a 530 prescott, that gets hot as hell

[devinXkillyou]

i have an amd athlon xp 2700, so it probably wouldnt get as hot as the prescott, i assume.

[pt]

i have an amd athlon xp 2700, so it probably wouldnt get as hot as the prescott, i assume.

only if you put in some crazy overclock :p , are you thinking of overclocking it much?, in your cpu at stock clocks it will probabily run passive :)

[devinXkillyou]

yeah i will run it stock, im not much of an overclocker at all. but i do play cs, so it gets hot every once in a while

[pt]

yeah i will run it stock, im not much of an overclocker at all. but i do play cs, so it gets hot every once in a while

you should look to a ac freezer 64 too, and see if your case fans, and graphics are doing much noise, if you go with the sonic tower passive keep a fan at hand for the hot days from summer

[Ketxxx]

you might want to do something with the corners of that windowed panel, as it stands it will make it look very "boxey" when its all finished imo.

[pt]

you might want to do something with the corners of that windowed panel, as it stands it will make it look very "boxey" when its all finished imo.

i like it boxey, the acrylic side panel will be like the front, with the acrylic also covering the aluminium, it is currently stopped 'cause my damn board is making me go nuts :mad: , thinking of rma it and buy a SLI version, but i didn't wan't another ASUS :cry:

[Ketxxx]

Asus Crosshair rocks ;) buy one :D

[pt]

Asus Crosshair rocks ;) buy one :D

:cry: f..cking asus gay board (m2n-e) :cry:
i have 250€ right now but i also need a hdd, and i don't wan't to spend it all now :( , and what am i going to do with mine then (turkey shoot?)

[Ketxxx]

buy the crosshair, sell ur mobo, buy new hdd, sell old hdd :D

[pt]

buy the crosshair, sell ur mobo, buy new hdd, sell old hdd :D

do i look like i have a money tree?, old hdd is worth very litle money, and i don't know anyone that wants my mobo :( , i'm looking for ppl that wan't a computer so i can sell the board and buy a better one for me :cool:

[t_ski]

That's about how I do my upgrading. I get some money, replace one thing, then sell it for money and replace another thing, etc. You would probably need to start with the most expensive item, which may be the mobo. Maybe if you get the Crosshair you can sell yours for enough to buy a new HDD, then sell your HDD or keep it for backups.

[pt]

That's about how I do my upgrading. I get some money, replace one thing, then sell it for money and replace another thing, etc. You would probably need to start with the most expensive item, which may be the mobo. Maybe if you get the Crosshair you can sell yours for enough to buy a new HDD, then sell your HDD or keep it for backups.

crosshair is out of budget, if i could squeeze out some money by selling mine i maybe could get enough money for the M2N32-SLI Deluxe :)

[pt]

this project is back on their feets, i'm going to buy spray paint tomorrow
orange uv for the inside
and dark black for the outside (and pheraps with orange uv stripes on the outside aswell)
i will post pics tomorrow :)

[pt]

http://img.techpowerup.org/061225/abc.jpg

my idea /\
what do you think?

[pt]

no suggestions? :(

[t_ski]

Not much for orange and black myself, but if you like it go for it ;)

[pt]

Not much for orange and black myself, but if you like it go for it ;)

orange uv rules, today the shop was closed, i will buy them tomorrow :D

[Alcpone]

pt, if you like your paint scheme go for it, thats all that matters @ the end of the day!

;)

[tkpenalty]

PT give me your P4S800...

[pt]

PT give me your P4S800...

my p4s800? :confused:

[pt]

pics: :) :) :) :)

http://img.techpowerup.org/061227/PIC_0016.jpg

http://img.techpowerup.org/061227/PIC_0018.jpg

http://img.techpowerup.org/061227/PIC_0020.jpg

http://img.techpowerup.org/061227/PIC_0021.jpg

http://img.techpowerup.org/061227/PIC_0023.jpg

http://img.techpowerup.org/061227/PIC_0024.jpg

http://img.techpowerup.org/061227/PIC_0026.jpg

http://img.techpowerup.org/061227/PIC_0027.jpg

:toast: :toast: :toast: :toast: :toast: :toast:

tomorrow i will paint the rest

[Canuto]

Looking really good ;)

[Alcpone]

Looking good pt, you should have taped off so you got a crisper edge and no overspill! ;)

[scofield]

i worked on this case too!!! :slap:
this case is going to be awsome, but there are some financial problems :ohwell:

[pt]

Looking good pt, you should have taped off so you got a crisper edge and no overspill! ;)

? :confused:

[Alcpone]

Just when you've got your side off for pics, looks a little untidy! ;)

[pt]

Just when you've got your side off for pics, looks a little untidy! ;)

the top one is duct tape, on the sides and bottoms isn't yet finish, but that zone isn't going to be seen :)

[Carcenomy]

I have just one question - why paint it when (since it's aluminium) you could have had it anodized? Paint chips off, anodizing doesn't - since the metal itself is the coloured part.

[pt]

I have just one question - why paint it when (since it's aluminium) you could have had it anodized? Paint chips off, anodizing doesn't - since the metal itself is the coloured part.

lack of money to anodize, i aplied a stuff first (dont know the name for it in english) wich will prevent the paint to chip if (or so i hope) :)

[t_ski]

The stuff applied to the metal before painting is called a primer. It makes the paint stick to the metal better.

Also, doing mods on the cheap side is much more common. Not everyone has the money to spend on fancy mods... :(

[Carcenomy]

Anodizing and powdercoating work out cheaper - better quality finish that's more durable with better shine, in one step versus priming, painting, painting again, sanding, clearing, and the rest... modding can look professional without spending lots of money, my case mod so far has cost about $150NZ tops and it looks like a totally different animal.

But in any case I'm sure it'll come out fine.

[pt]

Anodizing and powdercoating work out cheaper - better quality finish that's more durable with better shine, in one step versus priming, painting, painting again, sanding, clearing, and the rest... modding can look professional without spending lots of money, my case mod so far has cost about $150NZ tops and it looks like a totally different animal.

But in any case I'm sure it'll come out fine.

i hope :)
but i have no idea on how to anodize, and powercoating, nor anything related :ohwell:

[pt]

acrylic bought :D

[pt]

after all the work putting this: :rockout:

http://img.techpowerup.org/061228/PIC_0016.jpg

http://img.techpowerup.org/061228/PIC_0020.jpg

http://img.techpowerup.org/061228/PIC_0021.jpg

http://img.techpowerup.org/061228/PIC_0022.jpg

this SHIT happens::banghead: :banghead: :banghead: :banghead:

http://img.techpowerup.org/061228/PIC_0024.jpg

then i decided to paint it all black:

http://img.techpowerup.org/061228/PIC_0025.jpg

http://img.techpowerup.org/061228/PIC_0027.jpg

the case chassis finished: :)

http://img.techpowerup.org/061228/PIC_0026.jpg

[t_ski]

That's the bad part about painting layers. You need to use a good masking tape, and you need to make sure the bottom layer has dried (sometimes even cured) before doing the top layer.

Nao tocar? I know tocar is "to play" - what is nao?

[Alcpone]

That's the bad part about painting layers. You need to use a good masking tape, and you need to make sure the bottom layer has dried (sometimes even cured) before doing the top layer.

Nao tocar? I know tocar is "to play" - what is nao?

I guess "now" ;)

[pt]

tocar means "play", but also means "touch"
não means no

basically i write
don't touch :)

it was dry, but for some reason it happened
it's all black now, and better in my opinion
tomorrow i will go buy cold cathodes and fans :)

[t_ski]

Ah, muchos gracias :toast:

[Canuto]

It's great ;)

[pt]

Ah, muchos gracias :toast:

i don't speak "fu^king spanish", in matter of fact, i hate spanish :mad:
i speak PORTUGUESE

fodasse :)

[Alcpone]

Mmmmmm, nelly furtado would get it :p

[pt]

Mmmmmm, nelly furtado would get it :p

i don't like her singing aswell so i don't care :laugh:
anyone has an idea on how am i going to secure the acrylic to the case? :D

[t_ski]

i don't speak "fu^king spanish", in matter of fact, i hate spanish :mad:
i speak PORTUGUESE

fodasse :)

My appoligies. I just noticed the similarity and assumed.

"When you assume, you make an ass out of u and me." - old english saying

[pt]

My appoligies. I just noticed the similarity and assumed.

"When you assume, you make an ass out of u and me." - old english saying

sry, i get a bit pissed of everytime someone thinks portugal language is spanish :o
my appoligies aswell
ps: the similarities is because both languages derivate from latin

back to the project:
i'm still thinking of the orange stripes, pheraps i will still do them :)
what do you think?

[Canuto]

Ah, muchos gracias :toast:

Fodasse caralho pah! Que merda!! É Português e não a puta do Espanhol!

:)

[pt]

Fodasse caralho pah! Que merda!! E Português e não a puta do Espanhol!

:)

too bad, just the two of us understand this :laugh:

[pt]

orange and blue would look excellent inside. Especially if its a UV glower.

no blue on this mod, just black/yellow and orange :)

[t_ski]

too bad, just the two of us understand this :laugh:

Lost on the first part, but Que merda = What $hit!! The last part is "He is Portuguese and not the bitch of a Spaniard!"

[Canuto]

Wrong!

E já agora... Vai comer no cu fodasse caralho pah!! :roll:

:p

[pt]

Lost on the first part, but Que merda = What $hit!! The last part is "He is Portuguese and not the bitch of a Spaniard!"

pretty good, but missed the first part ;)
how do you find that?

the last part it's: "it's portuguese and no...

[pt]

Wrong!

E já agora... Vai comer no cu fodasse caralho pah!! :roll:

:p

ca ganda fodasse!, tá visto que vou ter que pedir a um mod pa limpar isto

FODASSE!

[Canuto]

Ele quer é cona e ele que se foda!! :laugh:

:p

[t_ski]

Ele quer é cona e ele que se foda!! :laugh:

:p

Be nice. We don't need that kind of profanity around here.

Back on the subject of the mod. If you still want to do the orange stripes I would suggest doing the orange first, then the black. A little while ago I remembered hearing a long time ago that you should always paint the lighter color first. When you mask it off, do you have some tape like this:

http://www.acehardware.com/product/index.jsp?productId=1307961&cp=&origkw=masking+tape&kw=masking+tape&parentPage=search&searchId=19033283631

Or maybe like this:

http://www.acehardware.com/product/index.jsp?productId=1273889&cp=&pg=2&origkw=masking+tape&kw=masking+tape&parentPage=search&searchId=19033169721

Also, check out this how-to:

http://www.mnpctech.com/case-mod-paint-computer-pc-case-mod-how-to.html

[pt]

Be nice. We don't need that kind of profanity around here.

Back on the subject of the mod. If you still want to do the orange stripes I would suggest doing the orange first, then the black. A little while ago I remembered hearing a long time ago that you should always paint the lighter color first. When you mask it off, do you have some tape like this:

http://www.acehardware.com/product/index.jsp?productId=1307961&cp=&origkw=masking+tape&kw=masking+tape&parentPage=search&searchId=19033283631

Or maybe like this:

http://www.acehardware.com/product/index.jsp?productId=1273889&cp=&pg=2&origkw=masking+tape&kw=masking+tape&parentPage=search&searchId=19033169721

Also, check out this how-to:

http://www.mnpctech.com/case-mod-paint-computer-pc-case-mod-how-to.html

thanks, i used black tape and paper (bad choice), about all the stuff above i will ask a mod to delete it, it's too much profanity :laugh: ;)

[t_ski]

You can delete it on your own - just click edit and go from there. Thanks.

I have used masking tape and newspaper with decent results. Always remember to do lots of light coats of paint instead of a coouple heavy ones.

[pt]

more pics:
the front isn't finished

http://img.techpowerup.org/061229/PIC_0016.jpg

http://img.techpowerup.org/061229/PIC_0017.jpg

http://img.techpowerup.org/061229/PIC_0018.jpg


http://img.techpowerup.org/061229/PIC_0019.jpg

http://img.techpowerup.org/061229/PIC_0021.jpg

http://img.techpowerup.org/061229/PIC_0022.jpg

old hardware ;)

[Canuto]

Nice :D

[pt]

Nice :D

thanks, but it could be better :ohwell:

anyone knows how di i put the acrylic? :D

[Alcpone]

Wow man, I aint seen a mobo like that since 1974 :laugh:

[pt]

Wow man, I aint seen a mobo like that since 1974 :laugh:

the board was made in 99 ;)

[Alcpone]

the board was made in 99 ;)

;) Just messing with ya...

[pt]

;) Just messing with ya...

this board could have traveled time, it may had a 101% overclock :laugh:

[Random Murderer]

wow, a slot processor on a board with isa slots....what are those sysem specs?

[pt]

wow, a slot processor on a board with isa slots....what are those sysem specs?

P2 400 (soon to be P3 500
DFI P2XBL
256mb sd ram pc133 cl2
nvidia fx 5200
generic 250w psu
40gb seagate hdd :)

it plays starcraft :D

[wtf8269]

Three words: Half-Life 1.5.

I have that same CD Burner. I remember we (my mom and I) got it for my dad as a Christmas gift ages ago and it cost about $350. LOL.

Are you going to be putting newer hardware in it? The case turned out pretty damn sweet. I think you should paint the drive covers and ghost the CD drive though.

[t_ski]

Looks good. For putting in the acrylic the best thing I've seen is double-sided tape. You can buy some decent stuff made by 3M that can hold plenty of weight.

[pt]

i used this:
http://img.techpowerup.org/061230/velcro.jpe
:)

[Random Murderer]

velcro! w00t!

[FanATIc]

Fodasse caralho pah! Que merda!! É Português e não a puta do Espanhol!

:)

ah! ya, considerame tambien porque el portugues es MUY parecido a la GRAN lengua española
tambien, no se te ocurra llamarme carajo, please :)
Mr pt, your mod is going very well, just make sure you change your hardware setup ;)

[Alcpone]

:wtf:

[FanATIc]

the velcro looks a bit strange, is it not better to fit it from the inside with some screws
it will look even better ;)

[pt]

ah! ya, considerame tambien porque el portugues es MUY parecido a la GRAN lengua española
tambien, no se te ocurra llamarme carajo, please :)
Mr pt, your mod is going very well, just make sure you change your hardware setup ;)

but you're spanish or portuguese?
and how's sweden, i would like to visit that country one day :)

a p4 at 2.4 may soon go to there :)

[pt]

the velcro looks a bit strange, is it not better to fit it from the inside with some screws
it will look even better ;)

velcro is cheaper :D , and easy to take off

[FanATIc]

velcro is cheaper :D , and easy to take off

First of all I'am a Chilean living in Sweden and well, Sweden is a nice and clean country, but now th weather is disgusting, with horrible gray days :)

Well, about the velcro, its cheap, but it doesn't looks as it ment to look like :)

[pt]

but now th weather is disgusting, with horrible gray days :)


rain or polution?


Well, about the velcro, its cheap, but it doesn't looks as it ment to look like :)

i think it looks as it should :confused:

[Alcpone]

rain or polution?


i think it looks as it should :confused:

Sweden only gets a few hours of sunlight a day if they are lucky, alot of people suffer from depression in the winter :(

I think it looks cool! ;)

[FanATIc]

rain or polution?



i think it looks as it should :confused:

jajaja!
no, rain of course, we are talking about a clean country man ;)
well about your mod, it looks like cheap modding some how, if you want it to look pro, listen to my advise ;)

[FanATIc]

Sweden only gets a few hours of sunlight a day if they are lucky, alot of people suffer from depression in the winter :(


OK! where did you read that? :twitch:

[pt]

jajaja!
no, rain of course, we are talking about a clean country man ;)
well about your mod, it looks like cheap modding some how, if you want it to look pro, listen to my advise ;)

well..., it was cheap, the paint costed me 5€, the acrylic 5€, and the velcro 2€, the lights and fans was the more expensive part

should i have putted something after the paint (wax?)

[FanATIc]

well..., it was cheap, the paint costed me 5€, the acrylic 5€, and the velcro 2€, the lights and fans was the more expensive part

should i have putted something after the paint (wax?)

no, but you can fix the acrylic so it looks better

[pt]

no, but you can fix the acrylic so it looks better

any ideas?

[FanATIc]

any ideas?

yes, exacly what I've told you, change change the velcro to screws in stead ;)

[pt]

yes, exacly what I've told you, change change the velcro to screws in stead ;)

no screws, i'm traumatized with screws after this::o (that's my aeroengine 2 side)

http://img.techpowerup.org/061230/PIC_0017.jpg

http://img.techpowerup.org/061230/PIC_0018.jpg

the side panel fell of while i was changing some hardware, and the screw pressure did that
with velcro that won't happen, besides, who ever has used velcro in a casemod :laugh: :laugh:

[Carcenomy]

Sunbeamtech have - the Sunbeamtech window kit came with velcro, and with some gold-coloured edging to put around the bare edges.

The reason screws or rivets like I'd use are better, is because otherwise your sidepanel has no rigidity. It's a thin floppy section of aluminium with nothing in the middle to hold it together. Most designs rely on the window to hold the panel in shape.

As for the P2... nothing wrong with that setup. I ran a dual P2-350 on an ASUS P2B-DS for a long time, eventually slapped a pair of P3-500 Katmais in it. Kept up with even the early P4s with relative ease.

[FanATIc]

no screws, i'm traumatized with screws after this::o (that's my aeroengine 2 side)

http://img.techpowerup.org/061230/PIC_0017.jpg

http://img.techpowerup.org/061230/PIC_0018.jpg

the side panel fell of while i was changing some hardware, and the screw pressure did that
with velcro that won't happen, besides, who ever has used velcro in a casemod :laugh: :laugh:

you screwed too hard maybe :(

[pt]

you screwed too hard maybe :(

i never unscrewed, the problem was, that when it hited the floor, the screws pressured the acrylic and... *crack* :(

[FanATIc]

i never unscrewed, the problem was, that when it hited the floor, the screws pressured the acrylic and... *crack* :(

hit the floor?
did it fell down?

[Canuto]

It was me :shadedshu nasty accident...

[FanATIc]

It was me :shadedshu nasty accident...

OH!
pt, that's not a reason to be scared of the screws

[Canuto]

I was kidding :p it wasn't me :roll:

[FanATIc]

I was kidding :p it wasn't me :roll:

jajaja good joke!

[xman2007]

Wow man, I aint seen a mobo like that since 1974 :laugh:

3 isa slots w00t plenty of upgrade options :roll:

[pt]

3 isa slots w00t plenty of upgrade options :roll:

is it possible to do sli with isa slots :p

the acrylic fell of and hit the floor 'cause off me :( :(

what color should the bay covers have?
black or orange?

[Carcenomy]

It's possible to do SLI (kinda) with ISA, yes. ISA primary videocard (let's say a Trident TVGA9000 with 1Mb RAM) and PCI Voodoo passthrough. Or in straight PCI, a pair of Voodoo2s for REAL SLI. :)

The ISAs would be best filled with a SoundBlaster 16 PnP and a SoundBlaster GoldFinch EMU8000 kit, so you have SB16 compatibility with AWE32 MIDI... perfect for ANY game.

[pt]

It's possible to do SLI (kinda) with ISA, yes. ISA primary videocard (let's say a Trident TVGA9000 with 1Mb RAM) and PCI Voodoo passthrough. Or in straight PCI, a pair of Voodoo2s for REAL SLI. :)

The ISAs would be best filled with a SoundBlaster 16 PnP and a SoundBlaster GoldFinch EMU8000 kit, so you have SB16 compatibility with AWE32 MIDI... perfect for ANY game.

i already have a sound blaster 4.1 pci to put there :)

[FanATIc]

i already have a sound blaster 4.1 pci to put there :)

Oh!
That's really gona be a "HI-END" PC :p

[pt]

Oh!
That's really gona be a "HI-END" PC :p

in a MILION years pheraps :laugh:

[Carcenomy]

Before you all get uppity, remember, Pentium II technology led to Pentium III. Pentium III led to Pentium M, Pentium M led to Core. P-II is an important part of Intel's history. And even now, a good P-II is a fantastic CPU. Leave it alone.

[pt]

Before you all get uppity, remember, Pentium II technology led to Pentium III. Pentium III led to Pentium M, Pentium M led to Core. P-II is an important part of Intel's history. And even now, a good P-II is a fantastic CPU. Leave it alone.

in the defense of the cpu, i have to say that it's still working :)

[FanATIc]

in the defense of the cpu, i have to say that it's still working :)

Well, that's good, it still can make something usefull!

[pt]

Well, that's good, it still can make something usefull!

a p4 will soon take is place :)

[WarEagleAU]

you may want to do some light sanding with very fine sandpaper inbetween the primer coats, main paint coats and then the final 2 or 3 layers of clear coat. Hope it helps (use rough 400 grit or so, for initial sanding and then switch to fine to smooth it out. Dremel is your friend. )

[pt]

you may want to do some light sanding with very fine sandpaper inbetween the primer coats, main paint coats and then the final 2 or 3 layers of clear coat. Hope it helps (use rough 400 grit or so, for initial sanding and then switch to fine to smooth it out. Dremel is your friend. )

i will probabily going to sand it all again :) and paint

[FanATIc]

i will probabily going to sand it all again :) and paint

So much job for to paint it again????
OH! COME ON!!!!

[pt]

So much job for to paint it again????
OH! COME ON!!!!

i'm being perfecionist on this job :)
if it ain't perfect i will do again

[FanATIc]

i'm being perfecionist on this job :)
if it ain't perfect i will do again

You should have been perfecionist from the begining!!!!!
but anyway, good and positive mentality!!!!!

[pt]

You should have been perfecionist from the begining!!!!!
but anyway, good and positive mentality!!!!!

i usually ain't perfecionist, but i'm trying this time :)

[tkpenalty]

"Omg" NEXT generation Scan Line Interface!!! This is "Elite" (lol old).

Get that P4S800 back D:

[pt]

"Omg" NEXT generation Scan Line Interface!!! This is "Elite" (lol old).

Get that P4S800 back D:

wich p4s800 :confused:

[cdawall]

get one of these
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2877770&CatId=1599
or maybe this :roll:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2877772&CatId=1599

[pt]

get one of these
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2877770&CatId=1599
or maybe this :roll:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2877772&CatId=1599

wtf...
why should i get those mobo's??

[cdawall]

wtf...
why should i get those mobo's??

its a combo cpu and mobo

aghhh stupid thing

This forum requires that you wait 30 seconds between posts. Please try again in 6 seconds.

[pt]

its a combo cpu and mobo

aghhh stupid thing

ah, ok :toast:
no need to, still on painting it (again)

[cdawall]

im curiose why is your sig pick have a 5000+ as the faded out image?

[pt]

im curiose why is your sig pick have a 5000+ as the faded out image?

ask pvtcaboose, he did it :)

[cdawall]

ask pvtcaboose, he did it :)

k lol want one with a 3000+ in it (post a ss of yours @ 2.8ghz and ill even add that)
:toast:

[pt]

k lol want one with a 3000+ in it (post a ss of yours @ 2.8ghz and ill even add that)
:toast:

currently at 1.8, ram arrives tomorrow from rma, will post then :)

[cdawall]

umm ok well guess i can wait :p