0.24 Beta 1

[W1zzard]

- Added option to control artifact detection sensitivity
- Fixed memory timings editor's MEM_TRFC extra options with garbled characters after the list of correct options
- Added option "Beep on artifact"
- Default profile always in list, even when profiles.ini does not exist
- Fixed crash issue when opening Memory Timings Editor window more than once
- When multiple ATI cards are installed, you can now select the one to use
- Crash issues when returning from standby/hibernate with Catalyst 4.8+ fixed
- Fan control is restored correctly when returning from standby/hibernate
- Completely rewritten Kernel Mode Driver, it's no longer a legacy NT4-style driver

Please test thoroughly

AMD64 testing is needed (my test system is gone)
Multi-ATI card testing is needed (got no ATI PCI card, MATROX!! :rolleyes: )
Please play with the different artifact detection sensitivity settings (is the range of settings there ok, do we need more "higher oc, less artifacts" settings?)

oh and bumped the version number a bit .. we gotta get rid of all those 0's

[Sierra Sonic]

Ive had this problem of atitool thinking ym old custom profiles are the default one.

[AndreyPopov]

W1zzard always nessesary reboot after change adapter or it was only after firat install (i not rebbot).

[W1zzard]

at the moment you always have to reboot when changing the adapter ... it should remember the selected adapter unless you change it again

[drsnooker]

Hey, I'll try the new beta as well. (Radeon 9800pro and radeon 7000)
Thanks again for all your great work!

[acrowley23]

AMD 64 testing...on my Sys (A64 3200_1mbCache_S754_Viak8t800) everything is working well...No Probs so far!

[AndreyPopov]

I e-mail also, but repeat - overclock work on both X800Pro and AIW VE PCI (7500), but cannot find ANY artifats anr in that time all screnn in artifacts.

[DaveM]

9600 here (300/500) *sigh* I'll give it a whirl, maybe we can get to 9600P speeds? :P

[PrometheusX]

I think this prog works very fine. Some bugs are possible, but if no one tell it to W1zzard, he can´t get them off.

[nanobug]

Any chance of a '-20c' option for the core temp, W1zzard? ;)

The temp values are also still showing "0" (probe) and "20.x" (core) under load on a 9800XT. :/

[opiants]

When I boot from a BSOD atitool tells me video card has been changed or no ATI video card found....

Didn't happen on other versions...back to .23 for now

[flunders]

Morrowind doesn't load up with ATI Tool running, this beta version and .23 version.

Edit: Well, once I installed both expansion packs, Tribunal and Bloodmoon, it loaded with ATI Tool running.

[ASM1]

Getting a weird "Ati card not found in system" error with my X800TX PE (AGP)

This happens on every reboot if I uninstall/reinstall ATItool, then it works fine, but as soon as I reboot I get the error :(

Am Using the new ati catalyst 5.1's

Ah well... maybe back to 0.23 for me... will see.

cheers

Andrew

[W1zzard]

asm1: could you install+run debugview (google) and set it to "log boot" then put its output here?

[ASM1]

I will do m8 np :)

Just need to go for a shower first :o :D :D

[ASM1]

As requested

================================================== ==============

00000000 0.00000000 ATITOOL(IRQL 00): Compiled at 01:00:56 on Jan 15 2005
00000001 0.00036192 ATITOOL(IRQL 00): ATIToolAddDevice: Created FDO 86E568A8
00000002 0.00148193 SMBios: In DriverEntry
00000003 0.00151432 SMBios: m_bBreakOnEntry loaded from registry, resulting value: [0x00000000]
00000004 0.00186702 SMBios: AddDevice called
00000005 0.00362481 SMBios: Entering SMBiosDevice::SMBiosDevice (constructor)
00000006 0.00368303 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=<unknown minor function>
00000007 0.26264118 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_FILTER_RESOURCE_REQUIREMENTS
00000008 0.27245105 InitRadeon Delaying...
00000009 0.27265155 SMBios: Entering SMBiosDevice::OnStartDevice
00000010 0.27310200 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_ID
00000011 0.27311599 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_ID
00000012 0.27313492 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_CAPABILITIES
00000013 0.27329311 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_DEVICE_RELATIONS
00000014 1.25887838 InitRadeon Delaying...
00000015 2.25885804 InitRadeon Delaying...
00000016 3.25877218 InitRadeon Delaying...
00000017 4.25872618 InitRadeon Delaying...
00000018 5.25866689 InitRadeon Delaying...
00000019 6.25861563 InitRadeon Delaying...
00000020 7.25856314 InitRadeon Delaying...
00000021 8.25851202 InitRadeon Delaying...
00000022 9.25846143 InitRadeon Delaying...
00000023 10.25840844 InitRadeon Delaying...
00000024 11.25835916 InitRadeon Delaying...
00000025 12.25832494 InitRadeon Delaying...
00000026 13.25825280 InitRadeon Delaying...
00000027 14.25820221 InitRadeon Delaying...
00000028 15.25814984 InitRadeon Delaying...
00000029 16.25810415 InitRadeon Delaying...
00000030 17.25804619 InitRadeon Delaying...
00000031 18.25799263 InitRadeon Delaying...
00000032 19.25795843 InitRadeon Delaying...
00000033 20.25789365 InitRadeon Delaying...
00000034 21.25783978 InitRadeon Delaying...
00000035 22.25779533 InitRadeon Delaying...
00000036 23.25774223 InitRadeon Delaying...
00000037 24.25769508 InitRadeon Delaying...
00000038 25.25764026 InitRadeon Delaying...
00000039 26.25760023 InitRadeon Delaying...
00000040 27.25753416 InitRadeon Delaying...
00000041 28.25748838 InitRadeon Delaying...
00000042 29.25743449 InitRadeon Delaying...
00000043 30.25737260 InitRadeon Delaying...
00000044 31.25731558 Aborted
00000045 99.04399003 SymTDI: ProcTrack: CalculateSignatureForModule : Module doesn't seem to have DOS header?
00000046 357.27162826 watchdog!WdUpdateRecoveryState: Recovery enabled.
00000047 506.98284570 [3336] App 1
00000048 506.98367358 [3336] 2
00000049 506.98560973 [3336] It hasn't been a day since the last update.

[ASM1]

A quick FYI for anyone else (W1zzard you may want to move/sticky this)
Debugview can be found Here (http://www.sysinternals.com/ntw2k/freeware/debugview.shtml)

:D

HTH

[W1zzard]

wow that is weird .. it's just trying to open hkey_local_machine\software

what os are you running?

[W1zzard]

hmm maybe your system startup is taking really long?

[ASM1]

XP SP2 and all subsequent updates...

The system might be taking a bit longer than "normal" but I have a lot of stuff loading up...

[W1zzard]

asm1: try if this one makes a difference for you .. longer delay now

[ASM1]

hmm ok :D

when I downloaded it and double clicked instant crash (- reboot) after the reboot and booting into windows it installed fine (didnt have it loading on boot, so ran it manually) I didnt get the error but the tool still looked the same i.e.
http://img.photobucket.com/albums/v299/asm016/Atitool.jpg

very strange

[W1zzard]

what does debugview say? do you have the atitool device in your device manager?

[ASM1]

yes I have the atitool device in Dev manager and there are no problems with it...
I will try reinstalling cat 5.1 and see if that helps

debugview log

================================================== ===============

00000000 0.00000000 ATITOOL(IRQL 00): Compiled at 01:00:56 on Jan 15 2005
00000001 0.00037327 ATITOOL(IRQL 00): ATIToolAddDevice: Created FDO 86EA73A8
00000002 0.00141757 SMBios: In DriverEntry
00000003 0.00144876 SMBios: m_bBreakOnEntry loaded from registry, resulting value: [0x00000000]
00000004 0.00179138 SMBios: AddDevice called
00000005 0.00337028 SMBios: Entering SMBiosDevice::SMBiosDevice (constructor)
00000006 0.00342572 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=<unknown minor function>
00000007 0.23257546 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_FILTER_RESOURCE_REQUIREMENTS
00000008 0.24456550 SMBios: Entering SMBiosDevice::OnStartDevice
00000009 0.24541487 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_ID
00000010 0.24543788 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_ID
00000011 0.24546966 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_CAPABILITIES
00000012 0.24578311 SMBios: Entering SMBiosDevice::DefaultPnp with IRP minor function=IRP_MN_QUERY_DEVICE_RELATIONS
00000013 0.24807961 InitRadeon Delaying...
00000014 1.23826178 InitRadeon Delaying...
00000015 2.23545028 InitRadeon Delaying...
00000016 3.23537747 InitRadeon Delaying...
00000017 4.23532801 InitRadeon Delaying...
00000018 5.23525879 InitRadeon Delaying...
00000019 6.23519620 InitRadeon Delaying...
00000020 7.23513924 InitRadeon Delaying...
00000021 8.23508256 InitRadeon Delaying...
00000022 9.23501940 InitRadeon Delaying...
00000023 10.23496616 InitRadeon Delaying...
00000024 11.23490073 InitRadeon Delaying...
00000025 12.23485271 InitRadeon Delaying...
00000026 13.23478730 InitRadeon Delaying...
00000027 14.23472750 InitRadeon Delaying...
00000028 15.23466696 InitRadeon Delaying...
00000029 16.23462200 InitRadeon Delaying...
00000030 17.23454755 InitRadeon Delaying...
00000031 18.23448941 InitRadeon Delaying...
00000032 19.23443750 InitRadeon Delaying...
00000033 20.23438198 InitRadeon Delaying...
00000034 21.23431916 InitRadeon Delaying...
00000035 22.23426081 InitRadeon Delaying...
00000036 23.23420117 InitRadeon Delaying...
00000037 24.23414486 InitRadeon Delaying...
00000038 25.23408526 InitRadeon Delaying...
00000039 26.23403242 InitRadeon Delaying...
00000040 27.23396862 InitRadeon Delaying...
00000041 28.23390417 InitRadeon Delaying...
00000042 29.23384093 InitRadeon Delaying...
00000043 30.23378534 InitRadeon Delaying...
00000044 31.23371611 Aborted
00000045 76.41359362 SymTDI: ProcTrack: CalculateSignatureForModule : Module doesn't seem to have DOS header?

[ASM1]

reinstall of cat 5.1 with ccc didnt help

[W1zzard]

are you sure you are installing the right version? the delay should be 90secs now in the package i linked above .. if you have an instant messenger please contact me .. makes things much faster :)

[ASM1]

I have added you to my msn

I installed the original beta, and then the one you linked to above (after uninstalling the original beta)....

[ASM1]

all worky now :D

cheers W1zzard ;) :cool: :cool: :D

[R350np]

Hi W1zzard.
Version 0.24 Beta1 works fine for me. The beep on artifact is a good idea. :D
I have done some tests with the sensitivity. In the default (i think the 2nd position from left is default?) I get nearly same results as with 0.23 (395.18/347.63, Stockcooling, errorfree for 990 sec.)
Then I moved slider to the middle and started "Find Max Core" again. At the scanning my 9800np shortly gets over 400 Mhz ( :eek: ) and then stepped back to 398. But at this clockspeed I can see artifacts with my eyes only, but ATITool doesn´t see them. I abborted the scan.
I think this option must be used very carefully.

P.S.: What about including two Soundfiles for the 3d-detection in the next version? I have found two nice soundfiles matching nice for up- and downclocking. If you are interessted, let me know. :cool:

[Diffe]

Hi w1zzard and other members.

I can test this beta with A64 (3200+ S754 and X800Pro).

PS: Is there coming refreshrate locking systems to ATITool? It is very welcome (I hate Powerstrip and other :()

[W1zzard]

please let me know if you run into any problems on a64.

i'm considering a refresh rate lock .. the catalyst cpanel refresh lock isnt working properly?

[Kurgy]

I tried the 0.24 beta 1, with my ati 9600 XT

My system:
DFI Ultra infinity nforce 2 Mb - Merlin bios modification
Gecube ati 9600 xt with vga silencer and cupper in mem chips
512 mb ddr kingston
athlon xp 2400 ---> 220x10.5 overclock
seagate 160gb

I upgrade the bios for the mobo recently and i don't know if this is the cause of this high overclock or if this the new ati tool, i must check with the previous version.

after:
clock: 494
mem: 332

now:
clock: 570
mem: 342

i want up a screenshot, but i don't know how :confused:

[Diffe]

please let me know if you run into any problems on a64.

i'm considering a refresh rate lock .. the catalyst cpanel refresh lock isnt working properly?

No.. In Counter-Strike etc.. i always get 60hz without powerstrip. with powerstrip and 100hzlock it works.

[jroad]

Hi, I have a PCI & AGP in my system so I wanted to check out this version. I see that when I select my AGP card (& it asks for a reboot), the Settings-->chip type shows up correctly (as do the timings), but the Settings-->Use Device drop down menu shows "PCI Device". I would have thought my AGP card would be in the dropdown since it is the currently selected one in ATITool.

Thanks for taking the time to support the dual video card folks!

J

[flunders]

Yes, the hardware monitor is extremely unstable. At times I can access it ok, other times it completly locks up my system.

[AndreyPopov]

W1zzard I hope you recieved all my e-mails with screenhoots about:

- init of find max: subsequent images are different. please report this bug
- color dots at right and bottom edges
- and no finding artifacts

I test again and find:
my configuration
AIW VE PCI - primary card (in BIOS dispaly init sets to PCI/AGP)
X800

in WindowsXP I use X800 (connected by DVI) as main application monitor and extend desktop to AIW VE PCI (in windows X800 - Monitor 2, AIW VE PCI - Monitor 1 ), I use Hydravision to redirect all output to X800 - Monitor 2.

when in windows:
- X800 - Monitor 2 set as primary monitor
- in ATI Tool choose also X800
- ATI Tool & 3D Preview window situated also on Monitor 2
and I try Find Max (any) than "recieve init of find max: subsequent images are different. please report this bug" and yellow 3D Preview window.

when in windows:
- Monitor 1 set as primary monitor
- in ATI Tool choose also X800
- ATI Tool & 3D Preview window situated also on Monitor 2
and I try Find Max (any) - ATI Tool CAN overclock, BUT not find ANY artifactcs even all monitor in artifacts, because ..... attention!!!!!!!!!!!!

because use for rendering and find artifacts AIW VE chip!!!!!!!!!!!!!!

[drsnooker]

W1zzard, great job so far. Atitool now works perfectly with my 9800pro and 7000.
I do have a small issue. I'm also using a dual processor setup and the cube doesn't rotate smoothly but is rather choppy. When I change the affinity of the atitool to a single processor the cube rotates normally. Everything seems to work perfectly fine, including the FPS reporting other than the cube rotating.

[Diffe]

W1zzard: No problems so far with A64 S754 3200+ and DFi S754 LanParty. Works good.

[Jafaro]

OH MY GOODNESS, the standby grabled screen issue on my notebook is fixed with this release! Thank You so much!!!!!

[andele]

Hi,

I tried to upgrade from 0.23 and it does not work. Even if I uninstall the old version first I get an error in the detailed install report. The error is:
New device driver could not install (0000000002)
However the device driver is loaded by the installation program and the atitool works fine .... until reboot.
After I reboot the system atitool gives an errormessage, that the kernel mode driver is not running. It is also not visible in the device manager.

It seems that the installation program fails to register the driver, but can load it ?!?

The same error also occurs if I try to repar the installation. However installing the old 0.23 over the new 0.24 works fine even without uninstalling the other version.

I'm lost. :confused: Any suggestions?


Thanks


André

[W1zzard]

andele does your windows bootup (till login) take longer than 30 seconds?

[andele]

No, I don't think that it lasts longer than 30 sec.

I also tried the second version of atittol 0.24 that you posted in this thread, the one with the longer waiting time - since the problem description given in the thread before seemed very similar to my problem.
However that made no difference.

I don't think that it is a problem of bootup, but of installation, since I already get an error there.
I wonder why the setup succeeds in loading the driver, but the system after reboot does not. Maybe some registration fails?

Thanks

André

P.S.:

I'm wondering about the error code given by the setup (2). If this is a standard windows error code it says "File not found". However if finds the driver to be loaded. So what file does it look for that setup does not find?

[W1zzard]

could you install debugview (link somewhere in this thread), set it to log boot and paste your atitool related messages?

[andele]

I'll try and tell you as sson as possible, since I'm off the next two days :-)

Thanks for your great help.

[MikeMurphy]

I registered on here to thank you for such an awesome program!

3000+ s939, A8N-SLI, X700pro, Win2k, .24 WORKS WELL!


Fixes,

Under hardware monitoring, the disk drives read as "1.$"celcius, not sure if thats a bug but looks it.

[MikeMurphy]

Additionally, I am not getting consistant framerates. Sometimes I hit around 200avg, and now im running the exact same thing at 140avg. It seems to happen if I have it open for awhile and I go through the menus. When I shut it down, and open it again it goes back to the 200avg framerate.

[andele]

Hello Wizzard,

now here comes the result of my research with debugview.

First of all the installation details when I install 0.24:
Output folder: C:\Programme\ATITool
Extract: ATITool.exe
Extract: ATIToolHooks.tmp
Rename: C:\Programme\ATITool\ATIToolHooks.tmp->C:\Programme\ATITool\ATIToolHooks.dll
Extract: monitoring.ini
Created uninstaller: C:\Programme\ATITool\Uninstall.exe
Driver setup: started
Old devices: removed
New device: created
Output folder: c:\temp
Extract: ATITool.inf
Extract: ATITool64.sys
Extract: ATITool.sys
New device driver: could not install (00000002)
New device: started
Create folder: C:\Dokumente und Einstellungen\andele\Startmenü\Programme\ATITool
Create shortcut: C:\Dokumente und Einstellungen\andele\Startmenü\Programme\ATITool\U ninstall.lnk
Create shortcut: C:\Dokumente und Einstellungen\andele\Startmenü\Programme\ATITool\A TITool.lnk
Create shortcut: C:\Dokumente und Einstellungen\andele\Startmenü\Programme\ATITool\A TITool Log File.lnk
Completed

You can see the error message during install. Direct executing AtiTool without reboot gives the following output in debugview:
ATITOOL(IRQL 00): Compiled at 01:00:56 on Jan 15 2005
ATITOOL(IRQL 00): ATIToolAddDevice: Created FDO 8199CB38
ATITOOL(IRQL 00): WARNING ATIToolRegQueryValueKey: ZwQueryValueKey failed c0000034
ATITOOL(IRQL 00): ATIToolSys loading.. searching for devices..
ATITOOL(IRQL 00): found ati device: 0x1002 0x4C66 bus 1 dev 0
ATITOOL(IRQL 00): 1 ATI devices found. Using: id: 4C66 bus 1. dev 0.
ATITOOL(IRQL 00): device fbPhy: 0xF0000000, mmrPhy: 0xE8100000.
ATITOOL(IRQL 00): mmapped mmr to 0xF887F000
ATITOOL(IRQL 00): BIOS at 0xC0000
ATITOOL(IRQL 00): mmapped bios to 0xB2B4F000
ATITOOL(IRQL 00): device initialized successfully

and everything works ok. Then I reboot and I get no debug output during boot process from atitool driver. If I start AtiTool after the reboot I get the message that the kernel driver is not running and only one message in debugview:
[660] Hook checking process: atitool.exe

Thats it. Atitool controls are greyed then.

Thanks for your help.


André

[W1zzard]

do you have the driver in your device manager?

[andele]

No, the driver is not in the device manager. So it seems, that really installation fails...

P.S.: With version 0.23 it was there and I suppose it should be at the same place?

[W1zzard]

no .. 0.0.23's driver is displayed under "non-pnp devices" .. 0.24 creates an own group "ATITool Utility"

"New device driver: could not install (00000002)" - 2 means file not found

does the directory c:\temp exist?

check if %SystemRoot%\SetupApi.log contains some useful information

[andele]

Ah ok, but the driver also does not exist somewhere else. And yes, the directory temp exists and the files are correctly copied there.

[W1zzard]

andele: do you have icq, aim, msn? if yes please contact me so we can work this issue out

[andele]

I do have an msn contact, however I unfortunately don't have the computer available at the moment where the problem exists. Si I either will try to contact you this evening or somewhen tomorrow.
Many thanks for your help.

[c0s7]

Hey, question..


Since 0.23 Final, why havent I been able to select the A.I Catalyst level anymore??

[andele]

Due to wizzards help I was able to come around the installation problem reported before. :)
If anyone else has the following problem on a windows xp computer:

You try to install ATITool, but after reboot the Utility reports that the kernel driver was not found

the problem is related to an unsuccessful installation. During installation press the "Details" button in the installation dialog and watch out for errors. If the installation program says that it was unable to install the driver you may do the following as solution:

Right click on the Desktop icon and choose "Properties" and then the "Hardware" sheet. Press the "Driversigning" button and set the option to "Ignore". Try to install again. Installation should work now. Don't forget to change the setting back to "Warning" after installation.

Many thanks to wizzard for his help!

andele

[webwilli]

i have an abit fatal1ty aa8xe with uguru and the (i hope) newest .ini, but the hardware sensor don´t work. will there be an other .ini available soon?

[Tikitiki]

I just downloaded the lastest beta. I will tell you if any thing went wrong in the process.

Cheers Tikitiki

[MikeMurphy]

I get about 121fps on my secondary display, while I move it over and get 200fps on my main display.

Is this a problem with the ati tool or the drivers?

[andele]

Hello Wizzard,

yesterday I discovered, that the 0.24 beta does not set the clock frequency after the wakeup from a system suspend. I thought you said it should do it now and I even thought, that I tried it once and it worked the last time, however it does not work now for me.
I usally have ATTool open in the tray area during resume. Just in case that makes a difference.

Have a nice weekend



André

[W1zzard]

andele could you install debugview, set it to log boot, leave it running while going into shutdown and back and post what it says?

[taramouse]

I have just installed your 0.24 beta 1. I will be using it to test the limits of my 9800 before and after fitting a bigger cooler and monitoring the effect. So I'll use this opportunity to give your beta a good workout. I'll let you know if I find any nasties or have any suggestions. Thanks for a great program. :cool:

AMD (Newcastle) 64 2.0 GHz 3000+ Socket 754
Gigabit K8NSNXP nForce3 250Gb
Radeon 9800 PRO 128 MB DDR 8x AGP
512mb PC3200 DDR400

[hummelmm]

I don't know whether anbody asked you to make an option that shuts down the computer when the core/memory reaches a certain temperature...?

regards

[AndreyPopov]

W1zzard I probably find where problem in color dots at right and bottom edges and error:"init of find max: subsequent images are different. please report this bug" when try to start #init find max mem# or #init find max core# ! ;)

any history before:

at my home computer, where my son playing computer games, in system tray about 18 icons ;). I use Autologon settings to start WindowsXP. and very often, when winows starts only 6 or may be 8 or some times even 2 icons appear in system tray.
I usually for my use do next - logoff and again logon, than all icons appear.

today, at morring my son on computer playing LOTR. later I decide run 3Dmark05, to see score on new cat 5.2 and start ATI Tool to load overcloked profile and....

cannot see color dots!!!!!!!!!!!

than run 3Dmark05 and cannot see at right and bottom edges like color flame!!!!!!!

run ATI Demo Ruby Double Cross and cannot see yellow gradient colored line about 10 sm width!!!!!!!!!

unbelievable!!!!!

I again start ATI Tool and try Find Max - NO MORE ERROR "init of find max: subsequent images are different. please report this bug"!!!!!!!!

what's happen????????????????? I think, but no any ideas.

than I go to ATI Tool Misc. and see ATI AI set to Low, but I remember that I set it to Advanced in ATI CCC! and I try check this, for this check click ATI CCC shortcut, but...... ATI CCC NO LAUNCH!!!!!!!!!!!!!

than I logoff and logon again, after this ATI CCC launch, I check Advanced AI and again start ATI Tool.....

unbelievable????????????????

AGAIN color dots at right and bottom edges!!!!!!!

AGAIN "init of find max: subsequent images are different. please report this bug" when try to start Find Max.


problem find: when ATI CCC runtime run (cli.exe) than ATI Tool get error "init of find max: subsequent images are different. please report this bug" and color dots at right and bottom edges.

[Jafaro]

Hey Wizard bad news!
Ur fix for the standby issue don;t work on the new 5.2's and I can;t get it to work on the 4.12's anymore now. A fix for this would be very nice.

[Uptime73]

I have a 9500 Pro flased to 9700 Pro. I am using Catalyst 5.2 with the Catalyst control center. Finding max core works great, but I am having problems finding max memory. It works fine, but after awhile, usually after 30 minutes, the screen becomes corrupt and my system eventually crashes. What should I do?

- Josh

[AndreyPopov]

Uptime73 - I think, you must check your PSU.

[Uptime73]

AndreyPopov,

What is PSU?

- Josh

[andele]

Hi Wizzard,

a few days ago I reported a problem, that ATITool does not set the values when the system returns from suspend mode. You wanted to see the debugview content, so here it is. I can't see anything specific to ATITool in fact. This is the complete log during shutdown and resume.

Thanks


André


00000000 0.00000000 [1776] [Error !] LCSPowerOff: EnumSpecificPort failed, PrinterInfo.hPrinter == 0
00000001 0.77593828 sisperf: DispatchPower!!
00000002 0.77619027 sisperf: DispatchPower!!
00000003 1.75640563 sisperf: DispatchPower!!
00000004 1.75642016 SystemPowerState: 5
00000005 1.75644474 sisperf: DispatchPower!!
00000006 1.75645145 DevicePowerState: 4
00000007 2.81788579 sisperf: DispatchPower!!
00000008 2.81790255 SystemPowerState: 5
00000009 2.81792490 sisperf: DispatchPower!!
00000010 2.81793245 DevicePowerState: 4
00000011 48.18373732 sisperf: DispatchPower!!
00000012 48.18374989 SystemPowerState: 1
00000013 48.18378872 sisperf: DispatchPower!!
00000014 48.18379710 DevicePowerState: 1
00000015 49.83816183 sisperf: DispatchPower!!
00000016 49.83817692 SystemPowerState: 1
00000017 49.83819647 sisperf: DispatchPower!!
00000018 49.83820486 DevicePowerState: 1

[MikeMurphy]

W1zzard,

I just installed the CAT5.2 drivers, and I do not think I made any additional changes to anything, and when I select hardware monitoring, it locks up the computer hard. I was extremely surprised as it worked earlier.

A8N-SLI X700pro

[AndreyPopov]

Uptime73 - PSU - Power Supply Unit.

MikeMurphy - mat be wait 10-15 seconds

I also have this trouble, but I wait and after 10-15 seconds prog and computer return to live ;)

[Cynips]

Hi Wizzard,
I did a find max core and max mem the other day (with 0.24 beta 1) and much to my surprise it found the same MHz (580 core/570 mem) as when I've been using the old method with earlier versions of ATITool. I went into the settings to check and the new method was in use, set to the next most sensitive detection.
I have a Visiontek Xstasy RADEON X800 Pro w/Cat 5.2. Wouldn't you too have expected lower results? Just thought I'd mention this in case the old method is being used anyway for some reason.

Thanks for a great piece of software. It's greatly appreciated!

[Diggs]

Selecting beep on artifact on the Artifacts page doesn't work, preview window becomes very jerky when mouse hovers over anything that brings up a message balloon, such as in the Task Tray. Not sure if this ones a bug or not but my voltage lines show up to be over 200V and my Hard Drive Temps are fine for the first inspection but if I go back to the main ATiTool page then back to the Hardware monitor page they show up as 1.$C. Lastly on the Fan Control page the defaults for the Dynamic based GPU Temps are dangerously high, not a bug but still needs sorting to stop those who don't check every thing from frying there card.

Cheers, Diggs

System-> P5AD2-E PREMIUM with 256Mb Sapphire PCI-E X800 PRO GDDR3 VGA/VIVO/DVI

P.s.. Is there any chance of passing on all the info from ATiTools Hardware monitor to MotherBoard Monitor as my board isn't supported under MBM5 and Asus Probe refuses to install..

[ojaneka]

Hi!

I have updated to 0.24b1

I have used ati tool from 0.22 and mainly it has worked great! Only problems i have had with it, is when im updating it, and keeping the previous settings. So now on i allways uninstall, and use ex. RegCleaner 4.3.0.780 http://www.majorgeeks.com/download460.html, or EasyCleaner 2.0.6 Build 6 http://www.majorgeeks.com/download414.html. And do a fresh install.

THANKS 2 WIZZARD

A64 3200 (NewCastle) @ 2,2, Zalman AlCu 7000
Twinmoss 1G 3200 203/2,5-3-3-8 1T (Stable), Cat 5.2 ccc
MSI K8N Neo p, 4HT
Club 3D X800Pro (16P) @ 530/540, ATI Silencer 4
XP pro
3DMark 05 5962pts
3DMark 03 12989pts

[W1zzard]

0.24 beta 2 has been released: http://forums.techpowerup.com/showthread.php?t=2268