silentnchaotic
12-06-2006, 10:56 PM
:D Hi and thx to all and any that may offer myself much needed help.
SPECS:
Motherboard Model : Nvidia Corp nForce4
Processor
Model : AMD Athlon(tm) 64 Processor 3200+
Speed : 2.01GHz
Model Number : 3200 (estimated)
Performance Rating : PR3015 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 1 Unit(s)
Package : FC µPGA939
Multiplier : 10/1x
Minimum/Maximum Multiplier : 10/1x / 10/1x
Generation : G8
Name : M2F-DH Athlon 64 (K8 Venice) 90nm 1.4-2.6GHz 1.45-1.55V
Revision/Stepping : 2F / 0 (10A)
Stepping Mask : DH-E3
Core Voltage Rating : 1.400V
Min/Max Core Voltage : 1.100V / 1.450V
Maximum Physical / Virtual Addressing : 40-bit / 48-bit
Native Page Size : 4kB
Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2F / 0 (10A)
Processor Cache(s)
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
Internal Instruction Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size
L2 Cache Multiplier : 1/1x (2010MHz)
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Power Rating(s)
CPU Core Power : 55W (estimated)
CPU Cooling System Thermal Resistance : 0.04°C/W (estimated)
Sensors
CPU1 Temperature : 35.0°C / 95.0°F
Auto Fan Speed Control : No
CPU1 Fan Speed : 993rpm
CPU1 Voltage : 1.39V
Mainboard
MP Support : 2 Processor(s)
MPS Version : 1.40
Model : NF-CK804
System BIOS : 10/03/2005-NF-CK804-VN61F211C-00
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 16GB
Bank0/1 - A0 : DIMM 512MB/64
Bank2/3 - A1 : DIMM 512MB/64
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty
Chipset 1
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Bus(es) : ISA PCI PCIe USB i2c/SMBus
Version : 1.02
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 1000MHz / 2x 200MHz
In/Out Width : 16-bit / 16-bit
SMP - MP Capability : No
IO Queue Depth : 8 request(s)
Chipset 1 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Speed : 2x 1005MHz (2010MHz data rate)
Logical/Chipset 1 Memory Banks
Bank 0 : 512MB DDR-SDRAM 3.0-4-4-8 2CMD
Bank 1 : 512MB DDR-SDRAM 3.0-4-4-8 2CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 201MHz (402MHz data rate)
Multiplier : 1/10x
Width : 128-bit
Refresh Rate : 5.00µs
Power Save Mode : No
Fixed Hole Present : No
System Memory Summary
Total Physical Memory : 1GB
Free Physical Memory : 698MB, 68%
Maximum Page File : 2.4GB
Free Page File : 2.2GB, 90%
Page File : C:\pagefile.sys 1536 3072
PSE36 - 36-bit Page Size Extension : Yes
Maximum System Pages : 1585152
Memory Module 1
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-4-4-8
Set Timing @ 200MHz : 3.0-4-4-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Memory Module 2
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-4-4-8
Set Timing @ 200MHz : 3.0-4-4-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Temperature Sensor(s)
Board Temperature : 33.0°C / 91.4°F td
CPU1 Temperature : 35.0°C / 95.0°F
Cooling Device(s)
Auto Fan Speed Control : yes
Chassis Fan Speed : 975rpm
CPU1 Fan Speed : 981rpm
TOTAL 4 FANS 2 NOT SHOWN
Voltage Sensor(s)
CPU1 Voltage : 1.39V
CPU2 Voltage : 2.56V
+3.3V Voltage : 3.17V
+5V Voltage : 4.95V
+12V Voltage : 11.61V
-12V Voltage : -12.11V
-5V Voltage : -4.00V
Standby Voltage : 1.99V
Battery Voltage : 2.75V
This may be way to much info, but after seeing some not post enough and have long a$$ threads, when all they had to do was offer a lil more info, i figured to be safer, and less a hassle.
I do have some programs that monitor cpu, and memory speed, voltage, temp and what not. Sisoft Sandra bieng the most informative.
again any assistance in explaing how and y would b appreciated. I'm pretty hardware and software literate, went to school for network engineering...some time ago, so plz feel free to explain in any manner u may choose.
thx again
SPECS:
Motherboard Model : Nvidia Corp nForce4
Processor
Model : AMD Athlon(tm) 64 Processor 3200+
Speed : 2.01GHz
Model Number : 3200 (estimated)
Performance Rating : PR3015 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 1 Unit(s)
Package : FC µPGA939
Multiplier : 10/1x
Minimum/Maximum Multiplier : 10/1x / 10/1x
Generation : G8
Name : M2F-DH Athlon 64 (K8 Venice) 90nm 1.4-2.6GHz 1.45-1.55V
Revision/Stepping : 2F / 0 (10A)
Stepping Mask : DH-E3
Core Voltage Rating : 1.400V
Min/Max Core Voltage : 1.100V / 1.450V
Maximum Physical / Virtual Addressing : 40-bit / 48-bit
Native Page Size : 4kB
Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2F / 0 (10A)
Processor Cache(s)
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
Internal Instruction Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size
L2 Cache Multiplier : 1/1x (2010MHz)
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Power Rating(s)
CPU Core Power : 55W (estimated)
CPU Cooling System Thermal Resistance : 0.04°C/W (estimated)
Sensors
CPU1 Temperature : 35.0°C / 95.0°F
Auto Fan Speed Control : No
CPU1 Fan Speed : 993rpm
CPU1 Voltage : 1.39V
Mainboard
MP Support : 2 Processor(s)
MPS Version : 1.40
Model : NF-CK804
System BIOS : 10/03/2005-NF-CK804-VN61F211C-00
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 16GB
Bank0/1 - A0 : DIMM 512MB/64
Bank2/3 - A1 : DIMM 512MB/64
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty
Chipset 1
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Bus(es) : ISA PCI PCIe USB i2c/SMBus
Version : 1.02
Front Side Bus Speed : 2x 1005MHz (2010MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 1000MHz / 2x 200MHz
In/Out Width : 16-bit / 16-bit
SMP - MP Capability : No
IO Queue Depth : 8 request(s)
Chipset 1 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Speed : 2x 1005MHz (2010MHz data rate)
Logical/Chipset 1 Memory Banks
Bank 0 : 512MB DDR-SDRAM 3.0-4-4-8 2CMD
Bank 1 : 512MB DDR-SDRAM 3.0-4-4-8 2CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 201MHz (402MHz data rate)
Multiplier : 1/10x
Width : 128-bit
Refresh Rate : 5.00µs
Power Save Mode : No
Fixed Hole Present : No
System Memory Summary
Total Physical Memory : 1GB
Free Physical Memory : 698MB, 68%
Maximum Page File : 2.4GB
Free Page File : 2.2GB, 90%
Page File : C:\pagefile.sys 1536 3072
PSE36 - 36-bit Page Size Extension : Yes
Maximum System Pages : 1585152
Memory Module 1
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-4-4-8
Set Timing @ 200MHz : 3.0-4-4-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Memory Module 2
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-4-4-8
Set Timing @ 200MHz : 3.0-4-4-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Temperature Sensor(s)
Board Temperature : 33.0°C / 91.4°F td
CPU1 Temperature : 35.0°C / 95.0°F
Cooling Device(s)
Auto Fan Speed Control : yes
Chassis Fan Speed : 975rpm
CPU1 Fan Speed : 981rpm
TOTAL 4 FANS 2 NOT SHOWN
Voltage Sensor(s)
CPU1 Voltage : 1.39V
CPU2 Voltage : 2.56V
+3.3V Voltage : 3.17V
+5V Voltage : 4.95V
+12V Voltage : 11.61V
-12V Voltage : -12.11V
-5V Voltage : -4.00V
Standby Voltage : 1.99V
Battery Voltage : 2.75V
This may be way to much info, but after seeing some not post enough and have long a$$ threads, when all they had to do was offer a lil more info, i figured to be safer, and less a hassle.
I do have some programs that monitor cpu, and memory speed, voltage, temp and what not. Sisoft Sandra bieng the most informative.
again any assistance in explaing how and y would b appreciated. I'm pretty hardware and software literate, went to school for network engineering...some time ago, so plz feel free to explain in any manner u may choose.
thx again