So I got my Hyper -X today....

[Taz100420]

I was wondering why its running at 134Mhz instead of 200Mhz like it should right?
I mean in BIOS the mem frequency is set to auto and it says 400, so do I fix it myself?
and I cant O/C to where I was at before this mem at 3.8Ghz

5836

[Taz100420]

5839


and this is my O/C'ing utility
if my mem frequency gets too high, I can lower it to increase my O/Cability on the FSB right?

[Taz100420]

Im a n00b with mem timings, by the looks off the pic 2 posts up could I do anything with it?

[pt]

Im a n00b with mem timings, by the looks off the pic 2 posts up could I do anything with it?

since your fsb is 533 the ram will run at 133 ;)

[Taz100420]

since your fsb is 533 the ram will run at 133 ;)

ok Im oc'ed at 3.7GHZ with mem freq of 128Mhz with timings of 2.5-3-3-7

[Taz100420]

I just hit 4.0Ghz! and its stable
5840

[pt]

I just hit 4.0Ghz! and its stable
5840

cool but your ram is too much underclocked

[Taz100420]

cool but your ram is too much underclocked
well whats a good timing?:confused:

[pt]

well whats a good timing?:confused:

200mhz cas2.5 ;)

[Taz100420]

right now im at 139.4Mhz, should be higher?

[pt]

right now im at 139.4Mhz, should be higher?

are you using a ram divider?

[Taz100420]

5841

5:4, right?

[pt]

can't you run a smaller one?
one that makes your ram runs at 200 or more?

[Taz100420]

well i restarted my computer and now its at 1:1

[pt]

well i restarted my computer and now its at 1:1

cool
:D overclock from there then ;)