0.0.21 beta information

[W1zzard]

0.0.21 beta is coming soon (days) .. either as release or as a version posted here

[BioDuo]

We'll Ok I think I can hold it for a couple of days more! :D

[kovenant]

hello from kov!

good luck w1zzard on your new site

waiting to test the new beta..... with the beta catalysts

kov

[Jeronimo]

Instead of Scan completed... After Max OC testing it just mentions:
2004-08-16 14:23:48 Scan

It never did that and since 0.0.21 the logging is way off :(

[W1zzard]

jeronimo: logging was fixed in the internal builds about 1 week ago

edit: found a bug in the "completed" area.. if the problem was not fixed 1 week ago .. it's now :)

[Jeronimo]

Have a build I can test?

[Jeronimo]

Fancontrol works like a gem, that former N'sync dude said it all: I am lovin' it

[Frozen]

I think its ready.

[kovenant]

temp prob on 9800 card here .....

[W1zzard]

yep.. fixed a few mins ago

[kovenant]

thanx w1zz :)

can you send it to test?

[kovenant]

accepted :) thanx

bug solved :)


kov

[BioDuo]

Is it possible to Download AtiTool 0.0.21 Beta Somewhere W1zzard???

Cause in 0.0.20 (and less) when I Click "Find Max Core" or "Find Max Memory" my screen just turns Black and nothing happens!! :confused: (waited 15 minutes)

[W1zzard]

bio: as you can see from the posts above we're sorting out the last bugs .. i'm shooting for a release this week.
current total number of known bugs to be fixed: 0

[veryhumid]

wow that's awesome w1zzard! looks like guessing the 20th was a good try ;) Just did a clean install, new MB, new drivers, can't wait for the .21 final and vga silencer!!! :attn:

is this version going to work with 9.0C?

[Jeronimo]

wow that's awesome w1zzard! looks like guessing the 20th was a good try ;) Just did a clean install, new MB, new drivers, can't wait for the .21 final and vga silencer!!! :attn:

is this version going to work with 9.0C?
I am using DirectX 9.0C and no problems with 0.0.21 so far. Also latest 4.8 Catalyst drivers with Omega settings: no problemo

[foreignkid]

I am using DirectX 9.0C and no problems with 0.0.21 so far. Also latest 4.8 Catalyst drivers with Omega settings: no problemo
Same here.

[Frozen]

Ya, same here. DX9C is fine.....

[kovenant]

so it seems this week will be a premiere for w1zzard's atitool

IMO its the best around

and it has future :)

kov

[=STE=BloodAngel]

I was looking for fan control for my X800Pro Vivo @ XT PE and I ran into this site. Is it possible that you send me a beta, I'll report any bugs I find.

[Bibiou]

I was looking for fan control for my X800Pro Vivo @ XT PE and I ran into this site. Is it possible that you send me a beta, I'll report any bugs I find.

me too

i have a sapphire x800 pro
is it possible that you send me the 0.0.21 version beta please ? :rolleyes:

[Slayerstaps]

Don't you people have any patience??
W1zzard is working on it and he already posted that it's prolly gonna be finished this week.
So have some patience we are not paying him for making this it's a free program so all you can do is wait....

[oBey]

yea this is gr8. cant wait untill the new version and the fan controller :D
i dont like my gfx temps 50 idle 76 load. using X800Pro@XT :)

[veryhumid]

Ya, same here. DX9C is fine.....

:drool:

also, newegg has silencers. and you can bet your life i ordered one right away!

http://www.ocforums.com/showthread.php?t=322273

[Jeronimo]

yea this is gr8. cant wait untill the new version and the fan controller :D
i dont like my gfx temps 50 idle 76 load. using X800Pro@XT :)
My Pro@XTPE idles around 45 and maxes at 72 (was 80 degrees), expect around 5-10% decrease in temp ar fulll load

[Jeronimo]

A few things noticed in 2004-08-17:
Percentages can all be set above 100%, also more than 3 digits.
When I set core or memory speed without confirming it yet and focues is lost, then it is reset to the current value (correct?)


Since my videocard crashed with the rotating cube, can you make something to run a stress loop, with just the rotating cube and the time running logged every once in a while?

2004-08-18 21:28:09 Stress loop started with clocks set to: 472.50 / 452.25...
2004-08-18 21:43:09 Stress loop running for 15 minutes.
2004-08-18 21:58:09 Stress loop running for 30 minutes.

or
2004-08-18 21:28:09 Stress loop started with clocks set to: 472.50 / 452.25...
2004-08-18 21:43:09 Stress loop running for 15 minutes.
and the last line replaced by:
2004-08-18 21:58:09 Stress loop running for 30 minutes.

[W1zzard]

A few things noticed in 2004-08-17:
Percentages can all be set above 100%, also more than 3 digits.

whatever you enter it will be clamped at 100 .. i'll put edit box filtering on the todo list


When I set core or memory speed without confirming it yet and focues is lost, then it is reset to the current value (correct?)
yep correct .. when the window is focused back it reads the current clocks from the video card.

[W1zzard]

i could make scan for artifacts make a log entry every 15 minutes?

[Jeronimo]

I can also set ATITool that the warmup phase need to start after 0 seconds and last 3600 seconds and stop after 3600 seconds of no artifacts, that would be the same thing for me.

[BoGG]

Hi..

I just got myself a Ati 9800 Pro 128 Mb and wanted to test out the clocks using your nice AtiTool which I originally used to Tweak a friends 9500 Pro. It did great for him but as I try to use version 0.0.20 on my 9800 I get an error message "startService2: The system cannot find the path specified." . Reinstalled and restarted without gettin it to work.

Think 0.0.21 can fix this or is that a driver problem on my side ?


P4 2.8@3.0 (533FSB@572)
1Gb Ram PC3200 @357Mhz
Ati Radeon 9800 Pro Retail
SB Audigy + 5.1 Speakers
XP Pro Sp1 - should I go Sp2?
Catalyst 4.8
Dx 9.0c


3DMark03
5562 - 378/338
5996 - 419/366 with artifacts usin' Powerstrip

[kovenant]

Bogg i had that in the past

remove atitool and log file and everything.

clear registry - i use tune up utilities for this.......

clear any file by search ab the atitool software - even in safe mode

close pc

start again pc (no restart)

install atitool

good luck

kov

[LanksL]

0.0.21 beta is coming soon (days) .. either as release or as a version posted here



Hi W1zzard!

Could i also be a lucky one and test this fine prog.???

thanx

[W1zzard]

version 0.0.21 has just been released!