0.24 beta 3

[W1zzard]

- Fixed AMD64 issues
- Revamped hardware monitoring, it uses a plugin architecture now, SDK available on request
- Added refresh rate fix (please test thoroughly)
- Fixed loading memory timings on startup
- Fixed standby/hibernation problems
- Warning displayed when "Alternate Pixel Center" is enabled
- ATITool can now be removed via Control Panel, Software
- Fixed some issues when running on systems without ATI card

[clerick]

Whenever i select the refresh rate fix tab Ati Tool crashes. Also i can't enable AI (greyd out).
hardware monitoring doesnt seem to work.
amd 64 2800 @ 2250
x800 xt pe
kv8 pro

[T1Cybernetic]

Testing, Seems ok to me, :D.

[jfb9301]

GPU and Environment temperature seem to be reading higher than normal (assuming normal for 0.24b2 was correct).

Refresh rate tab results in crash of 0.24b3.

WinXPproSP2, ATI Cats 5.2, Gigabyte x700 @ 501/531

http://www.hardfolding.com/ftag.php/mem/7360.png (http://www.hardfolding.com?go=38&id=7360)
The [H]orde needs You!

[Quazi]

The only thing giving me some trouble is the diskdrive.dll. When I enable it, my HD goes crazy. Sounds like it is going to vibrate out of the case. HEHE But all in all, you have added some really awesome features. I can put ATITray Tools down now because the only reason I was using it was for the Latency settings. You are an awesome m8!

[Diffe]

Refresh rate fix doesnt work, it crashes ATITool and shutdown it. Computer doesnt crash. Other options work well, thx m8 and fix refresh rate :)

[W1zzard]

updated lm78.dll which doesnt clutter the log as much.

put it into the plugins directory of atitool, replacing the existing one

[mR Yellow]

Thanx Wiz
Will test tonight and give feedback if i get any problems

[tommydc]

hi there,
are x850xt compatibilty problems solved with this version?
i refer to fan control ones in particular.

thanks in advance

tom

[R350np]

Works fine, but the Refresh rate tab results in crashing of ATITool, like others here.

[pierrick30]

i got a problem with dual screen and Atitool
when i open the 3d view on my secondary monitor i got 20 fps avg (X800 pro vivo @16P 550/500 vgpu=1.58) on the primary monitor i got around 270 fps avg
the OC is full stable after 3 hours in hl2 1280*1024 AA 6x AF 16x and everything set to max

[tommydc]

i continue to hear a sound during automatic fan control......(x850xt card).

tom

[Mephisto]

i get crashes going onto the hardware monitoring and the refersh rate control panels.

x800xl
MSI neo4 ultra plat

[W1zzard]

keep the reports coming please .. i'll be at cebit till tuesday next week so i cant fix anything .. but every report helps me getting stuff done faster once i'm back :)

[kenling]

yup. refresh rate causes atitool to hang. then i get DrWatson Postmortem Debugger poping up and saying that it (DrWatson) has encountered a problem n needs to close.

[virtualex]

Hardware monitoring now works with my asus 9600pro...but still no fan control..no fan control tab at all.

Refresh rate full functional.

It would be nice to set high temperature settings (resulting in a warning or changing profile to default) :D

[mR Yellow]

OK here goes...

- Refresh Rate fix causes ATI Tool to hang
- Under HW monitoring...nothing, just blank.

Wizzard, could plz add hHW monitoring support for the ASUS A8V-D motherboard

Will post more once i find more errors ;)

[acrowley23]

Yes...RefreshRateFix doesnt work. I get a AtiTool freeze..but everything else is working fine...Great Job

[shuflie]

Sent a HW monitoring report in to you, my motherboard is being detected properly as a Gigabyte K8VT800pro but the LM78 outputs aren't being picked up in it, the only thing listed is the sensor chip (IT8705F). Setting to SIS950/IT8705F generic 5 works and picks up on the sensor outputs, reported fan speeds now seem to be working :) Temperature monitor 3 is still reading 127°C though, don't know which sensor its trying to read though, perhaps the Gigabyte doesn't have a third temperature sensor. I'm getting the same results from both XP32 and XP64 so at least everything is consistent. How about adding in a desktop graph or dials app that we could attach different sensors to and log the selected sensor outputs in a seperate logfile?


Something wierd happening in the harddrive accustic section, I basically have 3 harddrives (5 physical), 1 is a 160G maxtor attached to the normal IDE interface, the other two are raid setups, one on the IDE raid interface and the other on the SATA interface. In XP32 I can read and set the accustic managment of the single IDE drive but not on any of the raid drives (didn't expect to be able to). In XP64 ATI tool doesn't even read the single drive settings. The weird thing is that when I click on read, the write button enables, even though I can't make a change.
As everyone else has noted, the refresh force tab crashes ATI Tool.
Starting to look like you might not be far away from a next release version when you get the refresh force tab fixed. :D

[InAwe]

keep the reports coming please .. i'll be at cebit till tuesday next week so i cant fix anything .. but every report helps me getting stuff done faster once i'm back :)


Refresh Fix is the obvious problem with ATI Radeon 9700 Pro system too. Just locks up; doesn't expose page. Stays at the last viewed settings page chosen. If I look at one of the others first.

[acrowley23]

The Standby ,Hibernation Problem isnt fixed for me...

[InAwe]

With 0.24 Beta 2 game I play was exiting cleanly on Exit command. It shut down, ATITool then reset the Defaults.
Beta 3. Clicked on Exit game; saw white lines swirling around until screen became totally black, music stuck in a loop. Cntl, Alt, Del and shut down manual. Sent in ATITool report via ATITool send switch.

[Ex0skelet0r]

refresh rate fix is crashing my pc

[opium]

Refresh rate fix doesnt work :(

[fei]

Where to download 0.24 Beta 3?

[Wam7]

@Fei
On the first page of this thread there's a link...

[acrowley23]

Hibernate Problem is fixed when i lock the Reference Divider on my x800...

[TotalChaos]

refresh rate works with XP Pro x64 RC2 and current ATI beta's on X800 Pro. AI is not included in the drivers beta so of course it's greyed out here

[InAwe]

- Fixed AMD64 issues
- Revamped hardware monitoring, it uses a plugin architecture now, SDK available on request
- Added refresh rate fix (please test thoroughly)
- Fixed loading memory timings on startup
- Fixed standby/hibernation problems
- Warning displayed when "Alternate Pixel Center" is enabled
- ATITool can now be removed via Control Panel, Software
- Fixed some issues when running on systems without ATI card

Refresh Rate Fix still locks up instead of displaying it's page. Am running an hour set for each function again to see if it has any new data that will help...

Hardware Monitoring 'Submit' button works great. Should set it up so you get the Miscellaneous 'Show Log File', as well, when you press the 'Submit' button.

[ASM1]

Works fine, but the Refresh rate tab results in crashing of ATITool, like others here.

Me too....

X800XT PE @ stock (for now) :D

[testemo]

refresh tab exit to desktop
hardware monitoring after ticking all the selection boxes exit to desktop
rest works fine so far

sempron 2200(1500) oc to 1800
9600 oc 420 204
asus a78n8x e deluxe

[Wolfie8881]

Just a suggestion

Old scanning mode works only after restarting the Program, would be nice to write it down on the menu so people would know ( and maybe other settings that require the program to be restarted)

[mR Yellow]

The Standby ,Hibernation Problem isnt fixed for me...

Same here :(

[W1zzard]

new version 0.24b4 out