PDA

View Full Version : [Case Gallery] Home made wood case


energyweapon
05-23-2007, 05:10 AM
To view this case mod, go here (http://www.techpowerup.com/gallery/details.php?id=799).

http://www.techpowerup.com/gallery/799/_1.jpg (http://www.techpowerup.com/gallery/799/1.jpg) http://www.techpowerup.com/gallery/799/_2.jpg (http://www.techpowerup.com/gallery/799/2.jpg) http://www.techpowerup.com/gallery/799/_3.jpg (http://www.techpowerup.com/gallery/799/3.jpg) http://www.techpowerup.com/gallery/799/_4.jpg (http://www.techpowerup.com/gallery/799/4.jpg) http://www.techpowerup.com/gallery/799/_5.jpg (http://www.techpowerup.com/gallery/799/5.jpg) http://www.techpowerup.com/gallery/799/_6.jpg (http://www.techpowerup.com/gallery/799/6.jpg) http://www.techpowerup.com/gallery/799/_7.jpg (http://www.techpowerup.com/gallery/799/7.jpg) http://www.techpowerup.com/gallery/799/_8.jpg (http://www.techpowerup.com/gallery/799/8.jpg)

Specs:
Asus commando
C2D E6600
Crucial Ballistic Tracer 8500 2G
MSI 8600GTS fan less

Mods:
Build a wood case to hold an old steel case in. No fancy lights, sorry.

http://forums.techpowerup.com/showthread.php?t=28659

aximbigfan
05-23-2007, 05:27 AM
heh....heh....heh....

you'v got.... heh... heh... wood.... heh....</beavis and butthead>

5/10


chris

tkpenalty
05-23-2007, 06:33 AM
Um no offense (lol) but, um its just a case in a cabinet.

caveman_1990
05-23-2007, 09:00 AM
LOL its very very LOL. You want us to rate to cabint or the pc rig?

Wile E
05-23-2007, 09:14 AM
I like it. It looks like a lot of work was put into this. I give it 7/10. If you got rid of the case inside the cabinet, and then cleaned up the wiring a bit, I would give it a 10.

tkpenalty
05-23-2007, 10:42 AM
I like it. It looks like a lot of work was put into this. I give it 7/10. If you got rid of the case inside the cabinet, and then cleaned up the wiring a bit, I would give it a 10.

Yeah you should cut out the rest of the old case and leave the motherboard and the rear I/O, then it will be a REAL wooden case :)

ex_reven
05-23-2007, 10:49 AM
If you look at his build log, he has the air from the case venting from under the wooden cabinet. It was quite well done.
The little area where the DVD drive protrudes looks a lil dodgy, but still its nice :) 7 from me

tkpenalty
05-23-2007, 10:54 AM
If you look at his build log, he has the air from the case venting from under the wooden cabinet. It was quite well done.
The little area where the DVD drive protrudes looks a lil dodgy, but still its nice :) 7 from me

I know... its obviously great but can be improved :)

energyweapon
05-23-2007, 03:58 PM
Yeah you should cut out the rest of the old case and leave the motherboard and the rear I/O, then it will be a REAL wooden case :)

The rear part is functioning as "muffler" to reduce the noise from the two 120mm rear fans. And it worked well.

DiabloAzul126
05-24-2007, 09:18 AM
Maybe a nice addition would be making a wooden bezel for the optical drive, or at least stealth the drive behind some wood. I think that would look slick, if it can be pulled off well.

Polaris573
05-24-2007, 07:16 PM
Did you build and finish the wood cabinet yourself or is it store bought?

Urlyin
05-24-2007, 09:21 PM
I think you should take the mod one step farther and do away with the PC case and build removable shelving or a back to the wood case to mount every thing to, opening it up for better air flow and easy upgrades ... still if you built the whole wood case from scratch you did a pretty good job ...

energyweapon
05-25-2007, 04:55 PM
Did you build and finish the wood cabinet yourself or is it store bought?

I build it.
check here: http://forums.techpowerup.com/showthread.php?t=28659

energyweapon
05-25-2007, 04:57 PM
Maybe a nice addition would be making a wooden bezel for the optical drive, or at least stealth the drive behind some wood. I think that would look slick, if it can be pulled off well.

I am thinking about it. Should be doable. Thanks.

Polaris573
05-25-2007, 05:50 PM
I build it.
check here: http://forums.techpowerup.com/showthread.php?t=28659

Nice work.

steelkane
05-27-2007, 06:37 AM
I voted 10/10 because:

I gave you a 10 just because of your Ideal and you put more modding time into your project then most. as for what I would do different, mount the hardware without the case in that nice box you built and finish it off with a Window with more fans, That would look awesome.

Exeodus
05-27-2007, 06:52 AM
Looks nice

DaMulta
05-28-2007, 03:56 AM
Looks nice

9/10

I bet lots of work went in to this and it turned out great.

2 reasons I didn't give it a ten.


I would think about making a stealth DVD drive.
I would clean the wires up a little bit more.

2THPIC
05-29-2007, 01:45 PM
very nice work and great detail on the wood work. got one question for you. did you use the org. power button or did you buy that big green button? i asking because i need to find a power button for my mod case.

energyweapon
05-29-2007, 08:38 PM
very nice work and great detail on the wood work. got one question for you. did you use the org. power button or did you buy that big green button? i asking because i need to find a power button for my mod case.

It is an industrial switch. I got it from a junkyard.

energyweapon
05-29-2007, 08:40 PM
9/10

I bet lots of work went in to this and it turned out great.

2 reasons I didn't give it a ten.


I would think about making a stealth DVD drive.
I would clean the wires up a little bit more.


Well, the DVD drive is covered by the wooden door (in the firsty pic). The other pics were taken before the door was installed. Sorry for the confusion. You are absolutely right about the wires.

Sovereign
06-04-2007, 09:49 AM
9/10

Good : Originality

Bad : Usefullness!?

Overall, I like it. The whole thing is fairly original so I give you props for that! The only questions I have is, why did you put Crucial Ballistix Tracer sticks in that setup? Especialy when you'll never see them, which is the reason to get Tracers in the first place (to be seen)!?

Chewy
06-04-2007, 11:32 AM
I think you should take the mod one step farther and do away with the PC case and build removable shelving or a back to the wood case to mount every thing to, opening it up for better air flow and easy upgrades ... still if you built the whole wood case from scratch you did a pretty good job ...

Thateres a good idea, DO IT!

I give you a 8 though I havent looked it all over completly yet.. if you build the mobo tray than I would give you a 9,5/10 and if you stealth the drive 10/10.

energyweapon
06-04-2007, 04:22 PM
9/10

Good : Originality

Bad : Usefullness!?

Overall, I like it. The whole thing is fairly original so I give you props for that! The only questions I have is, why did you put Crucial Ballistix Tracer sticks in that setup? Especialy when you'll never see them, which is the reason to get Tracers in the first place (to be seen)!?

I use Ballistix Tracer just beacuse I got a good deal on it. Kinda of waste of its fancy looking.

Ser-J
07-07-2007, 06:17 AM
I respect something different, awesome wood work! I give u 10/10

Jonnycat
07-07-2007, 07:47 AM
Wow, that's a completely original idea there, I really like it. The sound baffles are an excellent idea as well; good job, man!