Lapping experts needed

[Solaris17]

so i just got a brisbane 3600+ and a gig stick of ram but b4 i make the conversion i got a bunch of sand papper from the store and i need instruction now i know what lapping does only problem is i need method and grit type wet or dry?

i have 320grit 400 600 800, 1000 and 2000

only problem is i know i should start a t a low grit and work up but i need the method how and for how long should i polish circles lines or no? and also what grit should i start at?

[d44ve]

Here is the walkthrough I wrote up

http://forums.techpowerup.com/showthread.php?t=31579


Here is my e6600 that I lapped too

http://forums.techpowerup.com/showthread.php?t=31515

[Urlyin]

Solaris have you check this out here (http://forums.techpowerup.com/showthread.php?t=19)

[Solaris17]

thnx guys thnx a bunch ill read up wish me luck i have 1 hs

[demonbrawn]

This is somewhat complicated. It depends on what shape the metal surface is in that you want to lap. If it's in bad shape where you can feel scratches on the surface with your fingernail, start with the 320 grit. And always do it wet. Here's a nice review of the kit I got not too long ago: http://www.3dvelocity.com/reviews/pcviper/ultrakit.htm
It thought it worked great.