PDA

View Full Version : Do i have a psu problem ?


laszlo
08-01-2007, 10:28 AM
Hi all,

i have a few strange readings:

-12 V only 3

dual 3.3 v 2.9

the rest are ok; anyone know if this may cause problems?

thanks

ex_reven
08-01-2007, 10:31 AM
If the readings are true, then you have problems lol. I doubt theyr true, what program did you get the readings from?

Jimmy 2004
08-01-2007, 10:32 AM
What PSU is it? TBH, if your PC is running stable and not crashing I wouldn't worry about it - I apparently have -7.42V on the -12V, and my PC runs ok. Most likely it's just being reported incorrectly, but you should try stress testing with Prime95 for a couple of hours to see if it crashes just in case.

laszlo
08-01-2007, 10:48 AM
the readings are from bios for the -12 v and everest for dual 3,3 v

the sys. is working stable even with oc but sometimes i receive bios beeps (not always)but no crashes;this is why i start to check 1st the psu.

the psu was built in the case ( UTT case with front temp.&fan monitor)