GPU-Z Is it working for your card or not?

[newtekie1]

I figured it might help if we had a thread for people to just post if GPU-Z was working for them or not(I can't really think of a good title for it:laugh:).

So I figure we can get as many members as we can to just run it on their machines and see how it runs.

If it works it would probably be helpful to just post what your specs are(specifically video card) and just say it works.

If it doesn't you can do the same, but tell us what happened or why it didn't work(I'm sure screenshots would be very helpful).

I'll start:

I have an x1650Pro and GPU-Z seems to work perfectly with it.

I have an x200 and GPU-Z seems to work perfectly with it.

I have an x300SE and GPU-Z seems to work perfectly with it.

I have an FX5200 and GPU-Z won't run, it just give me an hour glass for a second when I click on it then nothing happens.

I have two 7900GTs in SLI, when I select the second adaptor in the drop down box it does say they are in SLI. If I select the first adaptor in the drop down box it says they aren't.

I have two 7600GTs in SLI, it shows the same behavior with SLI as with the 7900GTs.

Download it here: http://www.techpowerup.com/downloads/822/TechPowerUp_GPU-Z_v0.1.0.html

[Jizzler]

My box at work has a Radeon X1300 and Radeon 9250 (three monitors).

GPU-Z: Crashes upon startup.

[Jarman]

asus 8800gtx, works fine

[oily_17]

HIS x1950pro,everything working well here.:)

[JC316]

Where do you find this? I will try it if I can find it.

[pt]

hd2600xt, works here

[JC316]

Nevermind, I found it, and my 8600GTS works.

[tigger69]

works fine here-

sapphire x1950pro rev2 512mb/vista 32bit.must run as admin tho'

http://img.techpowerup.org/071004/gpu-z.jpg

[Ben Clarke]

LOL, NVIDIA Radeon X1950... works fine here, though not all fields are filled in. (NVIDIA GeForce 7100GS)

[tigger69]

lol yer,i just ignored the nvidia pic,it seem fine tho'.all the fields are correct.

[d44ve]

wouldnt it be a lot easier to list the cards that ARE NOT working?

[Namslas90]

Works fine (I guess);
http://img.techpowerup.org/071004/gpu-z627.jpg

Looks good W1zard, :toast:

[spud107]

its fine apart from the nvidia logo:p
http://img.techpowerup.org/071004/2007-10-04_191706.jpg

[newtekie1]

wouldnt it be a lot easier to list the cards that ARE NOT working?

I figured it would be helpful to list both working and non-working cards. This way if we see two people with the same card and it is working on one and not the other it will help narrow the possibilities down.

[Kreij]

Radeon X300/X500 Series ..

Everything looks good except ...
1) The Revision TextBox is blank
2) the DirectX Version is displaying 9.0, when 9.0c is installed.

[FAXA]

Sort of works. It starts and most fields are filled in, apart from Shaders, Bandwidth, bus width, ROPs and Texture fill rate. 8800GTS 320MB.

[newtekie1]

Radeon X300/X500 Series ..

Everything looks good except ...
1) The Revision TextBox is blank
2) the DirectX Version is displaying 9.0, when 9.0c is installed.

That is because the x300/x500 series only supports 9.0.

[t_ski]

Works for me, but again - there's the NVidia logo

[AthlonX2]

everything seems to be working as intended
9919

[d44ve]

I figured it would be helpful to list both working and non-working cards. This way if we see two people with the same card and it is working on one and not the other it will help narrow the possibilities down.


I see your point... but now W1zz will need to weed through all the "everything is OK" posts just to find one or two problems.

[Thrawn]

Running on Vista ultimate 32 bit. At the first try, my computer shutted down immediately.
On the second run I launched it with administrator privileges, and it worked.

http://img77.imageshack.us/img77/2015/gpuzte7.jpg

Keep up the good work, it will be a nice tool!:)

[Kreij]

That is because the x300/x500 series only supports 9.0.

Oh the humanity! :D

I noticed that on mine and also Thrawn's (X800 GTO) that the Die Size shows only mm2 with out a die size number.

[cjoyce1980]

it shows my memory overclocks, but not the core. it should read 621MHz
http://img.techpowerup.org/071004/gpu-z123.jpg

[Stinger_PY]

Works well with my system... BUT... it shows the Nvidia logo when I have an ATI card!!! :eek:

[Dark_Webster]

7600 GT works...

http://img.techpowerup.org/071004/aa.jpg

[peach1971]

it shows my memory overclocks, but not the core. it should read 621MHz
What app do you use for overclocking GPU/Mem ?
Did you enable OC for 2D mode? What for?


GPU-Z runs fine here :) PowerColor X1950 Pro [AGP]
Just my Samtron 98PDF 19" is listed as Samtron 17".

And yeah, I get that NVIDIA logo, too.
Little sponsorship? ;)

[3991vhtes]

Where can I download it?

[peach1971]

http://www.techpowerup.com/downloads/776/TechPowerUp_GPU-Z_v0.0.1.html

[t_ski]

In the downloads section or on the front page

[oli_ramsay]

Works fine for my X850XT

[sneekypeet]

http://www.techpowerup.com/downloads/776/TechPowerUp_GPU-Z_v0.0.1.html

hey tekie....you should make this easier and edit this to the first post!!!!

BTW works and recognizes SLI as well...
http://img.techpowerup.org/071004/gpu-z402.jpg

[W1zzard]

Radeon X300/X500 Series ..

Everything looks good except ...
1) The Revision TextBox is blank
2) the DirectX Version is displaying 9.0, when 9.0c is installed.

1. ati does not have revisions. i will disable the field
2. your card supports 9.0 - 9.0c has more shader features

[W1zzard]

Oh the humanity! :D

I noticed that on mine and also Thrawn's (X800 GTO) that the Die Size shows only mm2 with out a die size number.

please report gpu device id

[high5]

9920

[Nicksterr]

Not reporting all fields.

eVGA Superclocked 8800GTS 640MB @ Stock 576/1700
Windows XP Home 32-bit

http://img.techpowerup.org/071004/gpuz391.jpg

[SiCk]

Not working correctly for me @ Vista 32bits, same bugs that previous post

http://img.techpowerup.org/071004/Clipboard.jpg

[panchoman]

works for my x1950 pro except for the nvidia pic.

[W1zzard]

does anybody know r420 die size?

[panchoman]

http://www.techpowerup.com/gpuz/cdgnn

nice validation system, it picks the correct pic and i can add comments, sweetnes, :toast:

[high5]

does anybody know r420 die size?

http://www.beyond3d.com/resources/chip/63

[exxe]

Unknown architecture
with 3dfx Voodoo5 6000 :rolleyes:

please add it, please

[W1zzard]

Unknown architecture
with 3dfx Voodoo5 6000 :rolleyes:

please add it, please

not soon

[Kreij]

please report gpu device id

Device ID = 5B60 (1002 - 5B60)

[lemonadesoda]

http://img.techpowerup.org/071004/Clipboard01.jpg


nVidia logo. LOL

Anyone else got a FireGL-X3? It would be good to compare specs/speeds/BIOS

P.S. I am running 2x screens. Would be useful to show ALL vdu devices.

[Kreij]

Shudder at my graphics power pwnage!!!

[DRDNA]

It seems as though the PCI-E bus is incorrect I get report PCI-E 16X@8X
this is reported on both Master and slave card and in crossfire mode and not in crossfire mode.
http://img.techpowerup.org/071004/GPU-Z.jpg

The bios is set for X16 you can be sure of that.

[W1zzard]

http://img.techpowerup.org/071004/Clipboard01.jpg


nVidia logo. LOL

Anyone else got a FireGL-X3? It would be good to compare specs/speeds/BIOS

P.S. I am running 2x screens. Would be useful to show ALL vdu devices.

it does try to read both screens

[sneekypeet]

It seems as though the PCI-E bus is incorrect I get report PCI-E 16X@8X
this is reported on both Master and slave card and in crossfire mode and not in crossfire mode.
http://img.techpowerup.org/071004/GPU-Z.jpg

The bios is set for X16 you can be sure of that.


Mine also says the same info in SLI...but with my chipset when cards are in SLI they only run @8X speeds in both slots. the only way to run 16X on my DFI is to run a solo card....may want to investigate if board is truely a 32X chipset?

EDIT: the ATI 200 was an 8X8 chipset...the ATI 3200 was the 16X16 chipset!

[AthlonX2]

um drdna you only get 8 x 8 check the specs

http://us.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=3669&CATEGORY_TYPE=LP&SITE=US

[Thrawn]

please report gpu device id

Device ID from AtiTool: 5D4F
And from EVEREST 4.10 Build 1152 beta:

[W1zzard]

updated to 0.0.2 - check the sticky for what has been fixed

[HookeyStreet]

It just crashed my PC, so I would have to say it doesnt work for me lol :roll:

[mandelore]

Heres mine, works fine apart from the NV stuff...

http://i22.photobucket.com/albums/b312/eve_images/gpuz.jpg

146GB memory bandwidth :eek:

[Bonerheimer_c]

It works great with the 2900 Pro

[mandelore]

Fixed now, thnx W1zzard!

http://i22.photobucket.com/albums/b312/eve_images/gpuz2.jpg

bumped the memory a tad and 153GB bandwidth, lol

I know this is so totally off topic.. but i just took my memory to 2600Mhz without a crash :)

http://i22.photobucket.com/albums/b312/eve_images/gpuz3.jpg

[Thrawn]

updated to 0.0.2 - check the sticky for what has been fixed

I have started a thread on a hungarian hardware forum, the pictures may be useful :)
http://prohardver.hu/tema/gpu-z/friss.html

Here is mine tested with GPU-Z 0.0.2:

[Casheti]

0.0.1 had some problems, thinking it was an nVIDIA.

0.0.2 is perfect with both my X850'XTs :D

[mandelore]

the shader info doesnt display for ATI, tho on the 2900 is it just directly linked with the core speed?

[W1zzard]

the shader info doesnt display for ATI, tho on the 2900 is it just directly linked with the core speed?

ati does not have shader clocks. on nv it is linked unless you have teh new driver where you can adjust seperately

[mandelore]

ati does not have shader clocks. on nv it is linked unless you have teh new driver where you can adjust seperately

oooh, i thought the 2900's had a locked shader clock the same frequency as the core. I stand corrected. wait... ive read numerous places where the shader engine is the same speed as the 2900's default core aka 740mhz? could you clarify a bit for me?

[ITman]

Ati Mobility Radeon X1300
Works mostly (I think). Some issue with Monitor display string
http://forums.techpowerup.com/attachment.php?attachmentid=9924&d=1191533347

[moshpit]

Not working correctly for me @ Vista 32bits, same bugs that previous post

http://img.techpowerup.org/071004/Clipboard.jpg

I'm having a similar though not as bad bug. Card is EVGA 8800GTS Superclocked 640mb
http://i22.tinypic.com/msn77a.jpg

Mine is reporting only 16 ROPs (too few), 256bit memory bus (too low, it's 320bit), low memory bandwidth, and zero shaders.

Using Vista Ultimate x64, Forceware 163.67 WHQL, all updates current including stability and performance updates. GPUz version reported as 0.0.1.

[moshpit]

Just tried 0.0.2 and same bug persists. No changes.

[ricoh]

Zotac GeForce 8800 GTS 640
Windows Vista 64bit, UAC disabled, FW 163.69

http://img.techpowerup.org/071004/gpuz611.jpg

Missing: Amount of ROPs, Amount of Shader Units, Fillrate & Bandwidth calculation, Display information
Errors: FW version, wrong Shader clock:

It looks like GPU-Z isn't aware of unlinked Shader Domain overclocking in FW 163.69+.

This Post by Nicksterr (http://forums.techpowerup.com/showpost.php?p=482397&postcount=35) shows another (minor) flaw: his GF8800 GTS is reported with 80 Shader Units instead of 96.

----

Very nice program btw, i'm looking forward for some great releases in the future.

[happita]

ATI Radeon 9700 pro
Windows XP Home SP1

Works fine with my setup

[afzsom]

Seems to be a bunch of problems with BFG cards. Most (if not all) so far have reported the program doesn't work with BFG Tech cards. Link (http://www.overclock.net/software-news/243869-gpu-z-released.html) for reference.

BFG 8800GTS 640MB, will not work on XP Pro 32bit.

[lemonadesoda]

>> WIZZ

Still not showing the 2 display devices. Here is a FULL screenshot 3200x1200

http://img.techpowerup.org/071004/Clipboard03.jpg

[lemonadesoda]

Here is display properties vs. GPU

http://img.techpowerup.org/071004/Clipboard04.jpg

[Nicksterr]

This Post by Nicksterr (http://forums.techpowerup.com/showpost.php?p=482397&postcount=35) shows another (minor) flaw: his GF8800 GTS is reported with 80 Shader Units instead of 96.

Ah yes, thanks. Missed that.

[Paulieg]

Working perfect for me....

[ace80]

Works fine detecting both x1800 gto's
Just wish it would say crossfire instead of nvidia sli:ohwell:

http://img.techpowerup.org/071004/sm010.jpg

[PVTCaboose1337]

Works well for me... 7900gt here.

[panchoman]

yo w1zz, why dont you use the same script that you use for it to detect and change the pic to ati and use that to detect and change the text between Nvidia SLI and ATI Crossfire.

i see gpuz as biased considering the sli lol.

[JacKz5o]

Works great on my 6800GS :)

[pt]

http://img.techpowerup.org/071004/GPUZ297.jpg

clocks are still weird, but better now :)

[OnBoard]

http://www.techpowerup.com/gpuz/km2z3/

Somehow it thinks my card is already OCed, not recognizing 2D clocks as default (or 3D clocks, if it should use those). Turning on atitool with cube spining didn't help.

[Kreij]

Now at home on my Spec'd System.
Vista 32 bit.
Seems to work fine.

Revision Label and TextBox disabled as should be.
The GPU Shader clock Label and TextBox are disabled as should be.
The Default Shader clock label and TextBox are enabled but display nothing.
It fails to see my Dell monitor.
Detects both CF cards.

[peach1971]

cjoyce1980, you were right.
Current GPU overclock not shown with X1950 Pro (AGP here).

http://www.techpowerup.com/gpuz/kke87/
http://img444.imageshack.us/img444/7727/snap6858lh0.jpg

[Marioace]

Memory Type is displayed incorrectly

shows PCI EXPRESS, instead DDR4 or GDDR4

http://www.techpowerup.com/gpuz/34e5u

http://i235.photobucket.com/albums/ee228/Marioace/gpuz.jpg

[Kreij]

I noticed that Memory Type was shown as PCI_EXPRESS on PT's 2600XT also on his earlier post.

[Kreij]

I noticed that the Fill rates on my X1950xtx's are triple the 2600Xt, and the x1950 pro are double them. As well as the bandwidth.

Not trying to start a war, just something I noticed since I've been testing GPU-Z.

Interesting.

[Thrawn]

does anybody know r420 die size?

The R430 measures out to about 15mm by 16mm, or roughly 240mm2. That makes it a little smaller than the R420 chip used in previous X800 cards, which is about 260mm2. The R480 is about 18mm by 16.5mm, or 297mm2.

I found it here: http://techreport.com/articles.x/7742

[DRDNA]

um drdna you only get 8 x 8 check the specs

http://us.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=3669&CATEGORY_TYPE=LP&SITE=US

lol...isnt that some snit...when I first purchased this with in second day of original release...the specs read 1X16X+1X8X crossfire mode.....they must have redid the specs ..:confused: ....ole well:pstill a great mobo;)sure cant wait to upgrade to the DFI LP UT P35 T2R and a quad:rockout:

PS GREAT APP W1zzard

[Raovac]

:toast: Works good on my system :rockout:

http://www.techpowerup.com/gpuz/4dgq8

[Kursah]

Worked as designed for me.
http://www.techpowerup.com/gpuz/6sgh8/

[peach1971]

I noticed that the Fill rates on my X1950xtx's are triple the 2600Xt, and the x1950 pro are double them. As well as the bandwidth.

Should be around this:
X1950 XTX: 650 MHz x 16 ROPs = 10400 MPixel/s
X1950 Pro: 575 MHz x 12 ROPs = 6900 MPixel/s
2600 XT: 800 MHz x 8 ROPs = 6400 MPixel/s

Bandwidth:
256Bit Bus Width vs. 128Bit (2600XT)
...

[DOM]

:)

[LonGun]

GPU-Z 0.0.2 worked on my Geforce 8800 GTS.

[LonGun]

http://www.techpowerup.com/gpuz/z6xch/

[pt]

Should be around this:
X1950 XTX: 650 MHz x 16 ROPs = 10400 MPixel/s
X1950 Pro: 575 MHz x 12 ROPs = 6900 MPixel/s
2600 XT: 800 MHz x 8 ROPs = 6400 MPixel/s

Bandwidth:
256Bit Bus Width vs. 128Bit (2600XT)
...

hd2600xt = 4 rops ;)

[Stryder75]

working great on my 8800 gtx and vista. Only field not working is the monitor detect. No worries there. Overclocks are showing as well. Nice tool!

[Namslas90]

Version 2, X1900XTX, something :confused:
http://img.techpowerup.org/071004/gpuz2.jpg

:toast:

[AddSub]

Looks ok.

http://img.techpowerup.org/071005/Image2438.jpg

[francis511]

Sort of works. It starts and most fields are filled in, apart from Shaders, Bandwidth, bus width, ROPs and Texture fill rate. 8800GTS 320MB.

same

[SpookyWillow]

works fine for me http://www.techpowerup.com/gpuz/unb4b

[Weer]

It has no problem with my Ultra.

But when I try to use it on my Geforce MX440 and my Geforce FX 5200, it crashed immediatly and doesn't even open.

[von kain]

http://img.techpowerup.org/071005/Untitled.jpg


great work btw

[SpookyWillow]

someone just pointed something out on another forum so i thought i'd ask,

on the x1950pro's it show that theres 12 pixel shaders and 5 vertex shaders, according to sapphires and HIS reviews the card actually has 36 pixel shaders and 8 vertex shaders.

http://www.hothardware.com/articles/HIS_Radeon_X1950_Pro_IceQ3_Turbo/

http://www.trustedreviews.com/graphics/review/2006/10/19/Sapphire-X1950-Pro/p1

http://www.sapphiretech.com/ne/products/products_overview.php?gpid=168&grp=2

[starfox]

GPU-Z crashes on startup on my notebook (Dell Latitude D820 with a nVidia Quadro NVS 110M).

(Windows XP SP2, 2gb ram, 128mb video ram)

[ortigas24]

Hi, theres some problems with my card and GPU-Z

http://i116.photobucket.com/albums/o13/ortigas24/th_cpuzgrafica.jpg (http://i116.photobucket.com/albums/o13/ortigas24/cpuzgrafica.jpg)


Its a XFX 6800XT 256mb 256bits Agp
problems i know there wrong

Clocks
Memory clocks (default) lol a 140% boost
Memory type - not sdr but Gddr3
Monitor its a 17" (not that i care about this but...)

Im using windows XP sp2
Thanks and good job, a great software (after killing the bugs lol):rockout:

PS: Factory specs (http://www.xfxforce.com/web/product/listConfigurationDetails.jspa?series=GeForce%26tra de%3B+6800&productConfigurationId=550286)

[W1zzard]

0.0.3 released

[newtekie1]

Updated the link in the first post. The new version displays a caution box when I run it with just the number 3 in it, is it supposed to do that? Once I hit OK the program runs.

[ImmortalZ]

http://arunk.speedpost.net/GPU-Z1.png


http://www.techpowerup.com/gpuz/weygq

Everything seems to be working other than the monitor detection.

[Rugor]

Just tried Version 0.0.3 with my BFG 8800GTS 640MB on Vista Ultimate 32-bit. When I start the program I get a box with a yellow exclamation mark and the number 3, and then the regular page cumes up. I am still not getting any information on ROPs, Shaders, etc., but it is reporting my driver version as 1.58 which I believe is correct.

[W1zzard]

redownload, no more box "3"

[newtekie1]

Yep, it went away. Still have the problem with SLI detection though.

[nilknarf]

Mostly works on my 320MB 8800GTS under XP SP2, just missing the number of unified shaders:

http://www.ithinkibrokeit.co.uk/other/gpuz.png

Everything else is correct. Nice work so far! :)

[ortigas24]

Still some bugs

http://i116.photobucket.com/albums/o13/ortigas24/03.jpg
http://i116.photobucket.com/albums/o13/ortigas24/031.jpg

I opened severel times, the box 3 apeers every time

[DRDNA]

looking even better
http://img.techpowerup.org/071005/.003.jpg
HIP-HIP-HURRAY>>W1zzard:D

[DaMulta]

The word is out
http://www.theinquirer.net/gb/inquirer/news/2007/10/05/gpu-utility-shows

http://img.techpowerup.org/071005/gpuz.jpg

[DOM]

Edit: its works needed to restart comp :confused:

http://img.techpowerup.org/071005/GPU-Z-2569.jpg

[DRDNA]

The Validate submit works great also;)
http://www.techpowerup.com/gpuz/ex5vq/

[AmberClad]

I saw this program linked in the Anandtech forums. Great start :). It didn't fully work on my card though:

http://img.techpowerup.org/071005/PNYGTS.jpg

It's a PNY 8800 GTS 320 MB, running under XP. Someone else at the AT forums using the exact same card, but under Vista, had the same problems.

[Kreij]

Version 0.0.3 works fine on my X300/X500 Series.

Nice work W1z, and with the INQ picking up the story fame and fortune is sure to come your way soon!! :respect:

[Kreij]

Hey W1z,

Since there seems to be a little room left in the shader TextBox would it be possible to add the pixel and vertex level supported to the string that gets sent to the box?

Maybe something like "4 Pixel[2.0] / 4 Vertex[2.0]"

Just a thought.

[W1zzard]

Hey W1z,

Since there seems to be a little room left in the shader TextBox would it be possible to add the pixel and vertex level supported to the string that gets sent to the box?

Maybe something like "4 Pixel[2.0] / 4 Vertex[2.0]"

Just a thought.


directx version already implies that info. 9.0 = 2.0, 9.0c = 3.0

[Kreij]

directx version already implies that info. 9.0 = 2.0, 9.0c = 3.0

Ok, I just remembered that older versions of DX supported multiple shader levels.
(ie. 9.0a supported 2.0a and 2.0b)

Anyway, I noticed that after running validation, the validation page shows Die Size of "0 mm2" for my X300/X500 instead of being blank like the shader clocks.

[zolkorn]

X850 XT PE(R480) Work! :toast: Great software W1zzard :rockout:

http://img186.imageshack.us/img186/3237/clip8gf2.png

Cheers ;)

[AddSub]

Well, now 0.0.3 tells me my Crossfire is disabled vs. 0.0.2 that said my SLI was disabled. I'm not sure if any of this is by design. (single X850XT on a nForce4 SLI mobo)

Also, instead of blank box for "Display", now it says "unknown". (OS version is now indicated in driver box as well.)

Shader clocks are still blank (On X850XT shader clock is really the GPU clock, right?), although a small glitch appears to have been fixed in one of the shader info boxes. (see screenshots below for more detail)

0.0.2
http://img.techpowerup.org/071005/Image2540.jpg

0.0.3
http://img.techpowerup.org/071005/Image3.jpg

[synxll]

Works perfect on MSI 7900 GS
http://img440.imageshack.us/img440/5702/7900gskd8.jpg

Excellent program, thanks!!!

[thompson]

Crash on startup for me, I have 7900gt sli. The problem might be that I'm running hacked drivers (FW 85.96_mod) to enable sli on intel chipsets.

[Marioace]

now works great for me

Memory Type GDDR4 now :D instead PCI_EXPRESS

[jcmarfilph]

GPU-Z Validation 9zbf9
Card Name: NVIDIA GeForce 7300 GT
Owner: jcmarfilph Submitted: 2007-10-05 08:49:52
Owner's Comments:
GPU: G73 Revision: A1
Technology: 90 nm Die Size: 125 mm²
BIOS Version: 5.73.22.54.00 Device ID: 10DE - 0393
Bus Interface: PCI-E x16 @ x16 Subvendor: 0000 (Undefined)
ROPs: 8 Shaders: 8 Pixel / 5 Vertex (DX 9.0c)
Pixel Fillrate: 4.8 GPixel/s Texture Fillrate: 4.8 GTexel/s
Memory Type: DDR2 Bus Width: 128 bit
Memory Size: 256 MB Bandwidth: 16.0 GB/s
Driver: nv4_disp 6.14.10.9371 (ForceWare 93.71) / XP
Display: ASUS PM17TU (17")
GPU Clock: 600 MHz 500 MHz
Default Clock: 400 MHz 333 MHz
Overclock: +50% +50%

http://www.techpowerup.com/gpuz/9zbf9

http://inlinethumb15.webshots.com/19854/2801569570063660723S500x500Q85.jpg

[someguyfromhell]

i just join tech power up forums for this lol:laugh:

whatever, here's a screeny

http://img172.imageshack.us/img172/1320/61474212af1.png

[jtleon]

Works great for my 7800GS and 6600GT, both AGP, and my M52 Radeon Miniport on my laptop.

Great work!
Regards,
jtleon

[pt]

everything is good now except for the clocks :)

http://img.techpowerup.org/071005/GPUZ.jpg

[action man]

http://i152.photobucket.com/albums/s163/actionman_2007/gpuz.jpg

i have a 1950xt-x it has 48 pixel shaders.gpu-z only reports 16? :wtf:

[rabby]

My MSI 8500GT works correctly ! Thanks !

[PetriL]

GeForce 6100 (integrated), some information missing:

http://img.techpowerup.org/071005/GPU_003.png

[SpookyWillow]

so wizzard, any ideas why its displaying the wrong amount of shaders for the x1950pro?

[moshpit]

Just tried 0.0.3 and still have the missing info bugs. Zero shaders, wrong bus width, low bandwidth, and too few ROPs. EVGA 8800GTS Superclocked 640mb, Vista x64, Forceware 163.67 WHQL.

[racingwms]

Works fine with ATI 9600 PRO 128MB

But "unknown architecture" with intel GMA950 on my notebook

[jtleon]

i have a 1950xt-x it has 48 pixel shaders.gpu-z only reports 16? :wtf:

According to this link, you may be mistaken & GPU-Z looks correct.

http://techreport.com/articles.x/10615/3

I guess ATI might not have been so accurate in their product description.....don't know for sure.
Regards,
jtleon

[Fede]

Works great. ECS Elitegroup 7900GS.

http://img216.imageshack.us/img216/9910/gpuz1rg8.jpg

(I don't know about those 20 Mhz shaders though...)

[nightbringer]

:toast:
works fine with my notebook's mobility radeon HD2600 (detected as a HD2600pro because I cheated to install the catalyst 7.8 and soon the 7.9 :D)
:toast: the first software to detect my GPU, and I finally know the bus width (officially 128bits but often 64 because of the shitty hypermemory :shadedshu)... thanks to the creators :respect:
(notebook toshiba A200-13M)

[aggiebroz]

It works fine on my Mobility Radeon x700.

though it would be nice if the utility could show the amount of hypermemory on the mobile platforms.

[hat]

Works on my 8500gt

[W1zzard]

i need someone with 8800 gts to diagnose why the number of rops is not showing correctly (affects other values as well).

please contact me on instant messenger asap

[someguyfromhell]

i have one! http://img172.imageshack.us/img172/1320/61474212af1.png

[moshpit]

i need someone with 8800 gts to diagnose why the number of rops is not showing correctly (affects other values as well).

please contact me on instant messenger asap

PM sent.

[Assimilator]

@racingwms: GPU-Z only works for nVidia and AMD/ATI graphics cards currently.

[Soggy]

http://i97.photobucket.com/albums/l232/Soggypancakes/gpu-z.jpg

The biggest problem I've seen is the pixel/texture fill rates. they seem to be a bit off on most all of the screen shots Ive seen.

[telemac35]

Nvidia GO 7300: does not work (crashes upon startup)

[Anusha]

Works fine for me too, with my X800GTO

http://img440.imageshack.us/img440/8729/gpuzzz1.png

Gotta try the newer build :)

[ricoh]

4 ROPs, 4 PS, 2 VS, 1096 MPixel/s Pixel & Texelfillrate, 3,2 GB/s Bandwidth instead of 6,4 GB/s, GPU Clock = Default Clock

http://img.techpowerup.org/071005/fx5200.jpg

Same as 0.0.2 except the now working Driver Version

http://img.techpowerup.org/071005/8800gts.jpg

[sglider]

Hi, my 3DFuzion GeForce 6200 PCI: does not work (crash at start)

Everest info:

[ PCI: nVIDIA GeForce 6200 AGP ]

Graphics Processor Properties:
Video Adapter nVIDIA GeForce 6200 AGP
BIOS Version 5.44.A2.05.01
GPU Code Name NV44AGP
PCI Device 10DE-0221 / 0000-0000 (Rev A1)
Transistors 77 million
Process Technology 0.11 um
Die Size 110 mm2
Bus Type PCI
Memory Size 128 MB
GPU Clock 351 MHz (original: 350 MHz)
RAMDAC Clock 400 MHz
Pixel Pipelines 4
TMU Per Pipeline 1
Vertex Shaders 3 (v3.0)
Pixel Shaders 4 (v3.0)
DirectX Hardware Support DirectX v9.0c
Pixel Fillrate 1404 MPixel/s
Texel Fillrate 1404 MTexel/s

Memory Bus Properties:
Bus Type DDR
Bus Width 64-bit
Real Clock 281 MHz (DDR) (original: 280 MHz)
Effective Clock 562 MHz
Bandwidth 4496 MB/s

[k_buz]

Works fine with my Ati FireGL V5200. But there is no shaderclock? (I dont really know what that clock should be...)

:D

[Emile]

Hello,
I have 2 video cards installed.
GPUz only shows the GF 7800gs and not the GF FX5200.:rolleyes:
Recommendation?
Have a nice day

[TotalChaos]

version 4 now has all the info for 8800GTS

[kontra2757]

it works not for me!

[Wile E]

it works not for me!
Sorry to hear that, but W1z can't make it work, if you don't, at very least, say what gfx card you have.

[kontra2757]

it works not for me!

GeForce Go 7300; Bus-Typ PCI Express x 16

[kontra2757]

Sorry to hear that, but W1z can't make it work, if you don't, at very least, say what gfx card you have.

GeForce Go 7300

[jocksteeluk]

http://forums.techpowerup.com/attachment.php?attachmentid=9952&stc=1&d=1191671378

[sixor]

works good on my x800pro pci-x

[SpookyWillow]

According to this link, you may be mistaken & GPU-Z looks correct.

http://techreport.com/articles.x/10615/3

I guess ATI might not have been so accurate in their product description.....don't know for sure.
Regards,
jtleon

but isn't that report telling you how many pixels per clock the card can do and not the amount of shaders the card has? looking at gpu-z i would think its telling you the amount of shaders the card has and not how many it can process per clock cycle.

just looking at that chart again and for the 7900GTX it says pixels/clock 16 but in the scrrenshot 3 posts up its gpu-z is saying it has 24 :wtf:

[thompson]

Still crashes on startup for me.
Win XP sp2
FW 85.96_mod driver
7900gt sli

[Kreij]

According to the article ...
The R580-derived cards, meanwhile, have 16 dedicated texture address units and 48 dedicated pixel shader processors at their disposal.

Ok ... so why is GPU-Z reporting 16 PSs?

I am sure W1z can clear this up for us.

[ricoh]

GPU-Z 0.0.4 on my FX5200 shows the same picture as 0.0.3 does (http://forums.techpowerup.com/showpost.php?p=484232&postcount=145).

0.0.4 works fine on my 8800 GTS,

http://img.techpowerup.org/071006/8800gts.jpg

altough the Texture Fillrate should be the same as the Pixel Fillrate.

/edit:

Btw W1zz, you might want to take a look at the bottom of this page (http://www.madshrimps.be/?action=gethowto&number=3&howtopage=190&howtoID=72) as they provide a nice overview about the correct relationship between ROP Clock and Shader Clock on a G80.

/edit2: GPU-Z is right about the Fillrates, Everest is wrong.

[cdawall]

http://img.techpowerup.org/071006/gpuz.png

works but has some minor wrongs on it

[moshpit]

0.0.5 fixed my wrong and missing info bugs, now works right.

[V lyx]

I don't know if it's displaying all the correct info but it looks good and this is the first version out of the 5 that lets me open it.

http://i169.photobucket.com/albums/u219/VelyxFelyx/nvidia.jpg

Thanks for all the hard work.

[Thrawn]

Update from our hungarian hardware community:

Ati Radeon 9500 (http://kepfeltoltes.hu/071005/GPUZ_www.kepfeltoltes.hu_.jpg)
Ati Radeon 9000 Pro (http://plomplom.uw.hu/rad9k/rad9000.bmp)
Ati Radeon X800XT PE Valid (http://www.techpowerup.com/gpuz/mhm4/)
nVidia 7600GS (http://images.netbag.hu/20071005/17584652515.jpeg)
nVidia 7950GT (http://kepfeltoltes.hu/071005/gpu-z_www.kepfeltoltes.hu_.jpg)
Ati Radeon 9200SE Valid (http://www.techpowerup.com/gpuz/d8bqd/)
Ati Radeon X1800XT (http://kepfeltoltes.hu/view/071005/GPU-Z_0.03_www.kepfeltoltes.hu_.jpg)
nVidia 7900GT vmod+BIOSmod (http://www.kepfeltolto.hu/2007/10/5/thumbnail_5oda.jpg)
Ati Radeon 1900XT Crossfire Edition (http://kepfeltoltes.hu/071005/gpu-z2_www.kepfeltoltes.hu_.jpg)
nVidia 7900 GTO (http://kepfeltoltes.hu/view/071006/gpuz_www.kepfeltoltes.hu_.jpg)
Ati Radeon Rage 128 (http://kepfeltoltes.hu/071006/50753220n_vtelen_www.kepfeltoltes.hu_.jpg)
Ati Radeon X800XL (http://img159.imageshack.us/img159/3835/newje0.jpg)
newer version Ati X1900XT Crossfire Edition (http://kepfeltoltes.hu/071006/gpuz4_www.kepfeltoltes.hu_.jpg)
Ati Radeon HD2600XT (http://www.kepfeltolto.hu/2007/10/6//5p95.JPG)
FX5900XT (http://kepfeltoltes.hu/071006/695702069gpuz_www.kepfeltoltes.hu_.jpg)


Lot of our users said, that the program crashed on start with 7600GST and 6600GT!
I hope that this post was helpful :)

[moshpit]

http://www.techpowerup.com/gpuz/h8emv

Validation link using 0.0.5 fully working...

[Thrawn]

http://www.techpowerup.com/gpuz/h8emv

Validation link using 0.0.5 fully working...

No it's not, nothing at the Display box;)

[almightybmw]

registered just so I could say:
I have a 6150 onboard, and a 7900gs. gpu-z 0.0.1 - 0.0.5 don't work for me.

[AsRock]

v0.0.3 and .4 work for me all though .4 . BUT .4 1st time i ran it locked my PC up.

not sure if these are not done or just not showing,
Shader details are missing.
Revision missing

[moshpit]

No it's not, nothing at the Display box;)

Well, I can live with that. I was more worried about the GPU related info then what the GPU is hooked up to :p

[FatForester]

This thing completely reads my AIW X800XT, and it loads up a lot faster than CPU-Z can dream of. My 8600M GT is a bit finicky with this, but mobile GPU's are an entirely different breed.

[JrRacinFan]

works fine IF I use the most recent drivers. 93.17's crashed.

http://img.techpowerup.org/071006/nocrash.jpg

[clerick]

I'm just having one problem: it does not seem to show my shader overclock and instead lists it as default (using rivatuner 2.05).
http://i21.tinypic.com/2qlvdbr.jpg

[karatekatadvd]

Works with my Connect3D X850 XT PE AGP, but shows DirectX Version 9 and 9c is installed.

cu

http://img.techpowerup.org/071007/GPU-Z 0.0.5.jpg

[erek]

working after 0.0.4 with my Go 6800 series...
http://erek.necrotec.com/gpuz.JPG
http://www.techpowerup.com/gpuz/3mk5q

[|L1n3]

Works with my Connect3D X850 XT PE AGP, but shows DirectX Version 9 and 9c is installed.

cu


GPU-Z quotes the DirectX Version that is included in Hardware (your GPU) and not what Version you have installed as Software. In Hardware there is no difference between 9.0 and 9.0c cause 9.1 was never released.

P.S: GPU-Z 0.0.5 works for me with my 8800 GTS640 at Windows XP x64

[Oliver]

No Pb here.........:toast:

[fitseries3]

version 5 is best yet. everything looks great except doesn't detect monitor and still no SLI detection. im using vista 64 with 2 8800 ultras in sli. gpu-z reports SLI disabled. ntune reports SLI enalbled and benchmarks prove this is true. other than that... WORKS GREAT!!!

[No-body]

My card isnt fully supported yet. GPU and technologie are not filled and the buswidth and bandwidth are not filled in.
http://www.techpowerup.com/gpuz/ahrah/


I have the followin card:
471846200-8231 - GAINWARD 8231-BLISS 7600GT 256 Golden Sample, Geforce 7600 GT, 256MB 1.2ns GDDR3, AGP, Retail (BA7600GT-256-GS-TV-DVI)
TV-out, 2x DVI, 575MHz GPU (nVidia G73), 256MB GDDR3 (750MHz, 128 bit), 12 pixel pipelines, DirectX 9.0c, OpenGL 2.0, active cooling, AGP

[spanker]

i can't get it to run..
in version 0.0.5 and 0.0.6
windows just shows the process but the windows doesn't appear

i think because it's a laptop the computer i'm trying to run it with ?
the video card it's a Nvidia 7300 Go
running on Windows XP Pro SP2

The computer it's a Toshiba Satellite A205-SP4017

[(_KoDAk_)]

all OK
http://img264.imageshack.us/img264/434/nvgzyi0.png

[Dark Revenger]

All ok with my HIS X800GTO :)

http://img.techpowerup.org/071007/Immagine.png

[Kainco]

It's not running on my system, I'm getting the problem described here: http://forums.techpowerup.com/showthread.php?t=41431

[almightybmw]

hazaa! version 0.0.6 works with my setup now! recognizes the 6150 onboard AND the 7900GS.

[Krusher]

I'm getting Unknown Architecture on startup.

I'm running GPU-Z 0.0.6 on an Asus A3000N laptop
It's a Centrino based laptop, with an Intel 8252/8255 gm/GME controller.

[Thrawn]

I'm getting Unknown Architecture on startup.

I'm running GPU-Z 0.0.6 on an Asus A3000N laptop
It's a Centrino based laptop, with an Intel 8252/8255 gm/GME controller.

Because it is only supporting Ati and nVidia cards ;) (for now)

[Krusher]

Because it is only supporting Ati and nVidia cards ;) (for now)

Yeah, I figured that one out just today.. it was late for me last night :toast:
It was mentioned on a Dutch computer related forum so I thought I'd give it a try.

[j3$]

i can't get it to run..
in version 0.0.5 and 0.0.6
windows just shows the process but the windows doesn't appear

running on Windows XP Pro SP2

Ran into the same problem after initially downloading GPU-Z. Upon running the executable, the process would show up in task manager, but no GPU-Z window would ever display. After dissecting and screwing with it for a while, I was finally able to get it working using the following steps:

1. Navigate to your temp directory (i.e. "%userprofile%\Local Settings\Temp" on XP) and delete any instances of gpu-z.sys you find. Assuming you have attempted to run the program before and run into the problem in question, you end up having to kill the GPU-Z process from task manager. This means that GPU-Z never gets to "clean up" the temp file(s) it creates, which, at least in my case, ends up causing problems when trying to run the program again ("Could not start driver: the system cannot find the file specified").

2. Temporarily disable your Anti-Virus software. For reference, mine was Kaspersky (KIS) 6.0.

3. Right-click the GPU-Z executable, select "Run As", and, if it is selected, un-check the "Protect my computer and data from unauthorized program activity" box.

4. For overkill, go to Control Panel > System > Advanced > Performance > Data Execution Prevention, select "Turn on DEP for all programs and services except those I select", and add GPU-Z to the exclusion list. You may (or may not... or may just want to disable DEP altogether) want to change this back to its default setting after running (assuming it works) GPU-Z.

5. Attempt to run GPU-Z again. If it returns the "Could not start driver" error, just close the box and try again. It should work the second time around.

A semi-royal pain, I know, but, for what it's worth, I have managed to successfully use this workaround on two different machines that were experiencing the issue.

[No-body]

Looks like everything is working correct

http://www.techpowerup.com/gpuz/hnx8v/

[|L1n3]

Validation impossible for me ..
'Upload failed'

So there are no changes between 0.0.6 and 0.0.7 for me :(
My OS is Win XP x64 SP2, I use a NAT-Firewall in Router and ICS over my home-server.

[johnspack]

Validation at http://www.techpowerup.com/gpuz/vyefn/

[rishabhairi]

working fine....
validation : http://www.techpowerup.com/gpuz/5havd

[Yannis_GR]

Sapphire ATI x1950Pro 512MB, Win XP.
Works fine!

[pinguim]

Doesn't work for me. Does nothing and crashes system (sort of). Can't open new progs and have to press reset in order to reboot to go back to normal. Even after closing process in task manager.

[ratbert]

Works, but like others only reports sli when 2nd card is selected.http://img.techpowerup.org/071015/gpu-z707.jpg

[-=l32andon=-]

http://img.techpowerup.org/071016/2007-10-16_174243.jpg http://www.techpowerup.com/gpuz/9uru4/

[imperialreign]

http://img85.imageshack.us/img85/8373/gpuzzj1.jpg

no shader speed or revision number - but otherwise it's correct

[burebista]

At last. 0.0.8 is working (http://www.techpowerup.com/gpuz/9d57m/) on my system instead an instant shutdown when launched.
Subvendor is BFG (instead unknown 19F1). :)

[Fizban]

0.0.8 works fine here. Though it says DirectX 9.0C and I'm almost certain I have DirectX 10.
http://img.techpowerup.org/071017/GPU-Z.jpg

[stordoff]

Yep, works great.

http://www.techpowerup.com/gpuz/a865c/

0.0.8 works fine here. Though it says DirectX 9.0C and I'm almost certain I have DirectX 10.

Your card doesn't support DirectX 10

[W1zzard]

0.0.8 works fine here. Though it says DirectX 9.0C and I'm almost certain I have DirectX 10.
http://img.techpowerup.org/071017/GPU-Z.jpg

only hd2000 cards support dx10. even if you install dx10 on vista and your card supports dx9 you wont be able to run dx10 features :)

[freakshow]

its works for me :) :toast:

http://www.techpowerup.com/gpuz/n443n/

[-=l32andon=-]

http://img.techpowerup.org/071017/2007-10-17_172601.jpg

[xubidoo]

Works but as above unknown subvendor

(its a BFG Card btw)

http://www.techpowerup.com/gpuz/g2ur2/

[Steevo]

First time I launched it, my system hard locked.



After a reboot it was fine however.

[pmrdij]

has caused one system freeze (version 0.0.8) but otherwise no issues since 0.0.1.

- Robert (PmR)DeathInJune

[BlackArchon]

GPU-Z 0.0.8 does not properly recognize my GeForce FX 5600:

Validation: http://www.techpowerup.com/gpuz/bpmnm/
http://img.techpowerup.org/071019/fx5600.png

I will post many other pictures with not properly recognized cards later.

[BlackArchon]

Same missing data for my GeForce FX 5700 Ultra:

http://www.techpowerup.com/gpuz/zeq2c/
http://img.techpowerup.org/071021/fx5700.png
Everest:
http://img.techpowerup.org/071021/fx5700-everest.png

[Shurakai]

No problems found while using it with my card
http://img99.imageshack.us/img99/3230/gpuzworkiz9.jpg

[Widjaja]

Seems to be working for me but the Shader Mhz are greyed out.
Is the X1950pro supposed to have a R570XT core?

[its2cold]

Works perfectly for my MSI factory OC 8600GTS.

[Dave1234321]

just thought id post results:
(dont know how to post images)
http://img138.imageshack.us/img138/4255/gpuinfokj3.th.jpg (http://img138.imageshack.us/my.php?image=gpuinfokj3.jpg)
just wondering if the PCI-E was correct 2.0!!, also its only putting my 2d power saver clocks in and powerplay is disabled and laptop is in performance mode.

Running Vista buisness 64-bit, mobility drivers modified (MobilityModder) 7.10.

everything else seems fine i think. (stuff in red outline is wrong i think)

thanks Dave

ps. nearly forgot to say that the programs looking good keep it up :-)

[SirDeath]

App still won't run (GPU-Z - Video card Information Utility has encountered a problem and needs to close...) with Radeon 9250 /Analogue display/Dell Optiplex 270 WinXP SP2. Debug button on error dialogue does nothing.
-Don Muerte

[p_o_s_pc]

still working great for me.

[kbk_75]

Using 0.0.9 seems to be reporting things correctly, except that it says SLI is disabled on both my 8800GTXs, while I know that it is enabled. Also it does not list card manufacturer (PNY). There is no display tab either. I'm using Vista Ultimate 64 bit. Great little util, I wondered what my shader speed was until now! :)

[johnspack]

zalman fc-zv9 helped me get a bit more out of the old 7950gt... oh and shader is 25mhz, don't know why is greyed out..

http://i242.photobucket.com/albums/ff126/CamelJock/OC1.jpg

http://www.techpowerup.com/gpuz/2smcr/

small bios vmod, and yes it can be done! http://www.techpowerup.com/gpuz/w6qrn/ edit: stable for gaming...
next, pencil vmod for mem!

[Snipe343]

fine with my 8600GT

[ccleorina]

Run fine on my HD2900XT X-Fire.....:rockout:

[-=l32andon=-]

http://img.techpowerup.org/071026/untitled.jpg

[AnonymousJ]

URL=http://allyoucanupload.webshots.com/v/2000630848601108817]http://aycu29.webshots.com/image/33108/2000630848601108817_rs.jpg[/URL]

[SINKO]

It doesn't work on Quadro NVS 280 PCI-E.

[-=l32andon=-]

http://img.techpowerup.org/071114/2007-10-29_203249.png lol, anyways it's my girlfriend's mighty laptop. She was kind enough to lend it to me. unibabe

[-=l32andon=-]

http://img.techpowerup.org/071121/2007-11-21_054934.jpg

[cdawall]

dont think so

http://img.techpowerup.org/071121/untitled.png

and here is the desktop version :p

[YURETS]

don`t work at VIA Integrated Savage Pro 133 VideoCard,
SIS661Fx Integrated VIDEO.
And other S3 VIDEOCARD'S

[cjc81]

Hey guys, having some problems here.

I have 2x 1950pros, one of them from Powercolour, the other from Sapphire.

http://jason.bva-networks.com/forums/ati/cf01.pnghttp://jason.bva-networks.com/forums/ati/cf02.png

Strangely, when i enable crossfire, it says Enabled (1 GPU).

Any idea what's wrong over here?

[-=l32andon=-]

http://img.techpowerup.org/071126/2007-11-26_101740.jpg

[Ickrus]

cjc81 having the same problem with my 2900Xt's dvi-d to hdmi anyones help would be appreciated thanks. btw have called ati tech support they seem to be clueless on the matter.

system:
q6600
2gigs ram
mainboard:x38-dq6

ps: works find when pluged in dvi-vga shows 2 (gpus) but when pluged into tv only one shows.

[Ickrus]

almost forgot im running windows xp sp2.

[Triprift]

Works fine for me the other versions didnt even load

http://img.techpowerup.org/080103/gpuz.jpg

[t30m4n]

x1950pro, works fine, but no core and pcb temp

[Demos_sav]

Mine works fine except temperatures.... They are about 10C lower than Speedfan and rivatuner report

[Black Panther]

It worked fine for my 8600GTS, and also now also for my 8800GT.

http://i61.photobucket.com/albums/h77/bigwideland_2006/8600GTSGPUZ.jpg


http://i61.photobucket.com/albums/h77/bigwideland_2006/untitled-27.jpg

Edit: huh where is it that GPU-Z shows the temperatures?

[W1zzard]

download 0.1.6, there will be a new tab

[cdawall]

nothing on via chipsets....

[Laurijan]

Works perfect for my Inno3D 8800GT 512Mb OC Edition..

[Baum]

maybe mobility x1900 is wrong recognised with it's shaders, on my vista system (basic 32)

http://img81.imageshack.us/img81/2499/x1900meverestatitoolwr3.jpg

it doesn't show shaders right. 12/5 -> ?? ah schock

Please look at the picture i've compared it with Everest :rolleyes:

[ps2cho]

8600m GT DDR2 = OK
8800GT 256MB + 512MB = OK

[zaqwsx]

GPUZ dosn't seem to want to read my clocks right it says my gpu is: 796 and mem: 1125.

Here is a pic and also other programs say the right clocks. I reinstalled my drivers to see if that might be the problem but it didn't do anything.

Edit: Also subvendor is wronge it says HIS when mine is a PowerColor

[Paul-Vitti]

With a XGI Volari V3 it didn't work (I also think i didn't work with a V5 or V8)

[W1zzard]

With a XGI Volari V3 it didn't work (I also think i didn't work with a V5 or V8)

thats because xgi isnt supported. neither is matrox. and also not 3dfx :)

[Paul-Vitti]

Are these cards support by a later version? Cause I don't know something about this card (Just a little bit from wikipedia)

[W1zzard]

its not planned soon

[Black Panther]

As far as the feedback I can give:

Works fine on:

8800GT
8600GTS
FX5500
MX440
MX400

Doesn't load for:

SiS (but that's integrated I guess)
Intel integrated cards (obviously?)
Nvidia Vanta 16MB (very ancient!)

[spaeter]

Don't works on my 8800 gts (vista ultimate 64 sp1)


http://img165.imageshack.us/img165/1926/immagine1vy6.th.jpg (http://img165.imageshack.us/my.php?image=immagine1vy6.jpg)

http://img144.imageshack.us/img144/9075/immagine2ru7.th.jpg (http://img144.imageshack.us/my.php?image=immagine2ru7.jpg)

[puma99dk|]

GPU-Z 0.2.1 doesn't show Default clocks at my MSI GeForce4 Ti4400 at my Barton System:

http://christmas-netdk.off-topic.dk/GPU-Z.1.gif http://christmas-netdk.off-topic.dk/GPU-Z.2.gif

[p_o_s_pc]

Doesn't show default on my Geforce 4 MX440 on my P4 system
http://gpuz.techpowerup.com/08/05/24/zn.png

[Marioace]

Doesn't show all the info with Palit GeForce 9600GSO Sonic 768MB GDDR3

http://img58.imageshack.us/img58/5383/gpuzmc0.gif

its a Palit Sonic 9600GSO
Win Vista x86

[p_o_s_pc]

whats the difference between a 9600GSO and 9600GT

[puma99dk|]

whats the difference between a 9600GSO and 9600GT

9600GT can have 256, 512 and 1024mb GDDR3

9600GSO can have 384 and 768mb GDDR3

that's the difference and some of the clocks.

[p_o_s_pc]

thanks...

[Wile E]

whats the difference between a 9600GSO and 9600GT

9600GSO is a relabeled 8800GS