Post your x1950 Pro GPU-z Validations!

[Formula350]

Since the new one is released, and I haven't posted here in ages (since the long ass 1950 BIOS tweak thread), I figured I'd post :)

This is my highest, STABLE, OC on my card.

http://www.techpowerup.com/gpuz/734ez

Let the ePenis competition, BEGIN!

(BTW, as the comments say, it's just a HIS heatsink setup, ram is passive air cooled)

[Morgoth]

here is mine
when i runned opengl benchmark the gpu hited 63c-65c so i'm planing to buy a new cooling sink on it and clock it higher http://www.techpowerup.com/gpuz/zwdqw
Sapphire X1950 pro AGP

[Kursah]

Nice Forumula! Long time no see for sure! I'm still running that modded fan bios you made for my Powercolor. Alas I still haven't gotten it to budge above 621/770, except for a couple instances where it would run at 628/770 for a bench or two.

How the hell did ya get OC's like that? Must not be an older version of the x1950pro. Tigger69 has some pretty good OC's on his also.

Kickass work! :toast:

[Formula350]

I have an old version, not the new one based on the GT PCB. I don't know how I got so lucky. The ram probably can go a little higher too if I wanted to try. But I just let it stay there since it works :) I did do memory tweaks, but not much really. Was all just stuff I picked up from the BIOS thread, did it all my self, got lucky. Never toyed with that sort of thing before lol

[!TIMMY!]

Hello guys, heres mine:

http://www.techpowerup.com/gpuz/8mqdb

Using a Arctic Cooler atm, but thinking of changing the thermal paste to Collabortory Liquid Pro, and getting some Arctic Céramique to replace the thermal ram pads. I havnt changed the voltage yet, will do that when I get my temps down.

[ViPeR_NiPPleX]

After having an extensive play with my x1950pro agp:

http://www.techpowerup.com/gpuz/2f2aq

Stock powercolor cooling. Fan at 100%... I can't wait to cool this thing better :)

[nille_312]

Hi i have a powercolor x1950 pro with stock cooling, and i have a question What program do you all use when overclocking?
i don't trust atotool anymore coz it fu**ed up my pc last time with some OVERKILL settings and from then i dont know any good program to overclock with.

http://www.techpowerup.com/gpuz/79cpf


/// Nille

[SpookyWillow]

here's mine, i have had it a bit faster than this but it wont do the same clocks in this dfi mobo that it did in my asus mobo :/

http://www.techpowerup.com/gpuz/unb4b

[moRph]

http://www.techpowerup.com/gpuz/wnrqx

[rangerone766]

http://www.techpowerup.com/gpuz/6g4dz

is there any point in pushing the ram higher? i can bench with it at 824 and get no artifacts but i havent tried higher.

[insider]

http://www.techpowerup.com/gpuz/zrbgm/

[Formula350]

Hello guys, heres mine:

http://www.techpowerup.com/gpuz/8mqdb

Using a Arctic Cooler atm, but thinking of changing the thermal paste to Collabortory Liquid Pro, and getting some Arctic Céramique to replace the thermal ram pads. I havnt changed the voltage yet, will do that when I get my temps down.


This is for 1950 Pro owners, not 1900s :P :slap:


No, there's not reason to push the ram higher than 780 really. If your core is up around 640, then 810~ is about it.

I just leave mine maxed cuz I can :)