PDA

View Full Version : OVERCLOCKING: OCZ DDR2 PC2-6400 XTC Platinum Revision 2


twicksisted
10-05-2007, 10:06 PM
Hey Guys,

I want to get the most out of my ram...
this is my systems specs:

Asus P5K-E Wifi AP Motherboard
2Gb OCZ DDR2 PC2-6400 XTC Platinum Revision 2
Q6600 G0 (@3.2ghz)
HD2900 pro (@XT Clocks)
Enermax Galaxy 1000W

Basically I want to know if anyone else here has this ram, has overclocked it... what its comfortable with etc... any advice to overclocking it would be great.

And how far it will go speed wise :)

mitsirfishi
10-05-2007, 11:00 PM
you should get to 1066 at reasonable timmings could you try to get your mobo past 500fsb i have the same board and cant get past 500 :( for some strange reason

ownage
10-05-2007, 11:02 PM
You could try run 1:1, so 355fsb is 355/710mhz, which is to low :P
Best you could try is running 4:5, so 355fsb is 443/887mhz. It should be easy to run 887mhz @ Cas4.
You can give this memory a boost by setting (subtming) tRFC to 42 in your bios, or with memset offcourse.
I can reach 1080mhz benchable cas5 with this settings:
http://img375.imageshack.us/img375/6247/xtcty9.jpg

;)