N312D
07-23-2005, 08:01 PM
I have a question about dumping the bios for ati 0.24
My GPU is a ATI made 9800pro 128MB 256-bit Hynix bios flashed -> GeCube 9800Pxt 128MB 256-bit Hynix. It was successful in flashing and checked with RaBit 1.5 to see that when I dumped the bios shows standards clocks for GeCube GPU which is 398-C 350-M.
-My setting in Catalyst driver are:
--SMARTGART= 8x agp, Fastwrite "off" (ref. http://www.tweakguides.com/ATICAT_1.html)
--3D= D3D and OpenGL same = AA & AF "application preference", Txt Pref & Mipmap Lvl "high quality", Wait for Vsync & True form "off"
--VPU Recover= disabled
--Options= all unchecked
-My settings in ATITool 0.24 are:
--Overclocking= all unchecked
--Artifact Scanning
First heatup-phase starts if no artifacts detected for= "30" seconds
First phase has a length of= "60" seconds
After a successful phase, the next is longer by= "120" %
While running 'Find Max' increase frequency after= "30" seconds
Use old scanning method= unchecked
Stop scanning after= "10000" sec. without artifacts= checked
and set card to default clock speeds= UNCHECKED
and shutdown system= UNCHECKED
Disable screensaver during scans= checked
Beep on artifact= checked
Slider= All the way to the left "More artifacts detected Lower overclock"
--Gamma Control= none all unchecked
--Startup
Everytime ATItool is launched, load profile= Default (checked)
Load on Windows Startup via= Registry Key (checked)
When loaded via Windows Startup, exit after loading above profile= unchecked
--3D-Detection= none all unchecked
--Refresh Rate Fix= none all unchecked
--Miscellaneous
All unchecked except for
Limit log file size to 10000 KBytes
Minimize on close
Current selected Cat A.I. level Low
My question is I changed the clock settings ex. 429C 365M and click Set Clock then dump the bios. When I check with RaBit 1.5 are the clock settings suppose to be the same as the one currently set on ATItool or the default because when I checked it showed me the default (398C, 350M). Should it read as 429C 365M in Rabit after i successfully set clock speeds THEN dump bios?
Thnx,
N312D :confused:
My GPU is a ATI made 9800pro 128MB 256-bit Hynix bios flashed -> GeCube 9800Pxt 128MB 256-bit Hynix. It was successful in flashing and checked with RaBit 1.5 to see that when I dumped the bios shows standards clocks for GeCube GPU which is 398-C 350-M.
-My setting in Catalyst driver are:
--SMARTGART= 8x agp, Fastwrite "off" (ref. http://www.tweakguides.com/ATICAT_1.html)
--3D= D3D and OpenGL same = AA & AF "application preference", Txt Pref & Mipmap Lvl "high quality", Wait for Vsync & True form "off"
--VPU Recover= disabled
--Options= all unchecked
-My settings in ATITool 0.24 are:
--Overclocking= all unchecked
--Artifact Scanning
First heatup-phase starts if no artifacts detected for= "30" seconds
First phase has a length of= "60" seconds
After a successful phase, the next is longer by= "120" %
While running 'Find Max' increase frequency after= "30" seconds
Use old scanning method= unchecked
Stop scanning after= "10000" sec. without artifacts= checked
and set card to default clock speeds= UNCHECKED
and shutdown system= UNCHECKED
Disable screensaver during scans= checked
Beep on artifact= checked
Slider= All the way to the left "More artifacts detected Lower overclock"
--Gamma Control= none all unchecked
--Startup
Everytime ATItool is launched, load profile= Default (checked)
Load on Windows Startup via= Registry Key (checked)
When loaded via Windows Startup, exit after loading above profile= unchecked
--3D-Detection= none all unchecked
--Refresh Rate Fix= none all unchecked
--Miscellaneous
All unchecked except for
Limit log file size to 10000 KBytes
Minimize on close
Current selected Cat A.I. level Low
My question is I changed the clock settings ex. 429C 365M and click Set Clock then dump the bios. When I check with RaBit 1.5 are the clock settings suppose to be the same as the one currently set on ATItool or the default because when I checked it showed me the default (398C, 350M). Should it read as 429C 365M in Rabit after i successfully set clock speeds THEN dump bios?
Thnx,
N312D :confused: