New case for me .

[trickson]

Well after 3 years with the Cmstacker case I finally bought a new one . I have lots of work still to do on it I know but it still looks nice .
http://img267.imageshack.us/img267/738/dsci0121ju4.jpg
http://img267.imageshack.us/img267/4521/dsci0122vu4.jpg
http://img267.imageshack.us/img267/1572/dsci0123tc4.jpg
http://img267.imageshack.us/img267/490/dsci0124bl4.jpg
http://img267.imageshack.us/img267/7779/dsci0125gj0.jpg

So what do you think ?

[sneekypeet]

nice case but it could reall use some better wire management...It took me like 3 times B4 i got it close to right and Im still not completely happy yet! Good luck as this is a real challenge to mod it for wires!

[trickson]

nice case but it could reall use some better wire management...It took me like 3 times B4 i got it close to right and Im still not completely happy yet! Good luck as this is a real challenge to mod it for wires!

I agree and well I am waiting for my BFG PSU to get back from RMA right now so I don't think I will be doing much in the way of wire management right now .

[trickson]

New pic's . got the BFG650W PSU back finally .
I am not sure how to do any of the wiring with the PSU I have here the wires are really short and well I have no room to put them any were but were they are . but it looks nice .

http://img178.imageshack.us/img178/5653/dsci0127ip7.jpg

http://img178.imageshack.us/img178/473/dsci0129bp7.jpg

[Chewy]

Nice man. The Ultra cpu cooler really spices it up, matches that case very well.

hate to cause you alot of extra work but maybe before you re-wire it you could paint the inside black or atleast all of it besides your drive bays.

[trickson]

No painting of case just yet . I still have to find a PSU that has wires long enough to hide away and that is going to be hard to do .
here are some more pic's for you ..
http://img176.imageshack.us/img176/2433/dsci0133ye2.jpg

http://img176.imageshack.us/img176/9303/dsci0132xa1.jpg

http://img176.imageshack.us/img176/6994/dsci0131rh3.jpg

[NeoCrisis]

If you really want to hide those wires you probably gonna have to cut into the mobo tray. One hole at the bottom near the PSU and 2 slot holes the side next to the Motherboad for the ATXpower and other power cables.
Also you should get some heat shrink tubes for the ends of your cable sleeves.

Thermaltake PSU have pretty long cables from what ive heard.

[erocker]

Sneekypeet, you should post some pics of your case, I can't find any?!

[trickson]

OK cut some holes redid the wires and well not as good as you all but better none the less .

http://img178.imageshack.us/img178/6528/dsci0137dw7.jpg

http://img170.imageshack.us/img170/3057/dsci0136jw9.jpg

http://img170.imageshack.us/img170/3306/dsci0135na3.jpg

http://img297.imageshack.us/img297/7391/dsci0123vc6.png

http://img176.imageshack.us/img176/6366/dsci01226uu7.png

http://img297.imageshack.us/img297/630/dsci0121rg3.png

http://img176.imageshack.us/img176/3857/dsci0130ep4.png

[trickson]

http://img144.imageshack.us/img144/4310/dsci0131dd0.jpg

[Chewy]

Thats one sexy setup, you should think about adding a 120mm low speed fan to the mesh on the side panel ;) low speed so it doesent cause much noise... maybe an antec tri-cool.

[Duxx]

Where you get that rear 120mm exhaust fan that light up red green blue.. cant seem to get my hands on one. :D Quite sexy indeed.

[trickson]

Where you get that rear 120mm exhaust fan that light up red green blue.. cant seem to get my hands on one. :D Quite sexy indeed.

I think that I got that one at frys some 3 years ago!

[waspman3]

Trickson @ 1st the picture I saw Im like there's no way then the more I got to looking not bad at all.Nice rig you got there dude.I have to have some one else work on my rigs because that way I know it'll be done right.Im currently in the market for a new CASE(MIDTOWER)with some usb's in the front.Ive got a decent system but wanna upgrade just a tad.You know the feeling.I see you have ULTRA in your processer I believe that it.I like there Memory chips as thats what I have from them.Good luck in your endeavors. WASP

[trickson]

I got the BFG 650w PSU back . I found that I had to redo the wires that connect to the 8 pin connector on the mobo . I set out to install 4" wires onto the existing wires giving me more length so that I could connect the pins into the mobo . now it is all installed once again and well here is what it looks like with that PSU installed .