Clockgenerator wont be detected

[Zoors]

Dear Sir,

Yesterday my ASUS P4C800E-Deluxe did detect the clockgenerator (ICS952607).
I could overclock my 2800 to 3200+ (I didnt believe it first).
The memory settings could not be changed, however.
Today I started off with disabling the "Memory settings by SPD", that I suspected be the trouble with that... Then it didnt detect my clockgenerator. So I put the SPD function back. No improvement.

My system is very stripped of unnecessary services, highly trimmed, and is used for gaming.
I have a 9800Pro that runs just over 400 core.

So I didnt change anything from the BF2 session yesterday.
Today it refuse to detect the CG. What might cause the problem?


Regards,

Zoors

[Zoors]

Problem solved.

In my intension to strip even more stuff from the system, makin it faster, I tryed to disable the SMBus controller, (me idiot), something I regarded as "the Serial Bus Controller", that was popular years ago.

System worked fine without it... but SysTools didnt - as SMB is that "System Management Controller" that is needed for SysTools to werk...

:rolleyes:


/Zoors