help with hooking TV to GFX

[PuMA]

ok so i got this scart to s-video adapter. i hooked it up last night, and all i can see is in TV is distorted black and white "image".

the TV seems to respond to any changes i make in NTUNE, but the picture in Tv is just fuzzy.

any1 got any ideas, how to get the picture clear.

[JC316]

Hmm, make sure that it's set up for video out in the nvidia control panel. I had this issue before and it was caused by the settings being wrong.

[marsey99]

tv display wizzard in the nvidia controll panle should help you out m8y.

[DanTheBanjoman]

A: your TV might not support s-video, force a composite signal
B: Connect pin 15 to pin 20 in your scart converter.

[PuMA]

Hmm, make sure that it's set up for video out in the nvidia control panel. I had this issue before and it was caused by the settings being wrong.


I´ve tried all kinds of settings in ntune. can u point out where the video out setting might be???

@DAN how can i force composite??

I´ve heard similar probs with VISTA so could it be that i have XP x64????

[DanTheBanjoman]

I´ve tried all kinds of settings in ntune. can u point out where the video out setting might be???

@DAN how can i force composite??

I´ve heard similar probs with VISTA so could it be that i have XP x64????

Don't have an NV card here to check exactly. Just open up that converter and connect pin 15 to pin 20. It's the best solution.

[PuMA]

Don't have an NV card here to check exactly. Just open up that converter and connect pin 15 to pin 20. It's the best solution.

what would that help?? i checked the scart connector pins and pin 15 seems to be RGB Red In / Chrominance

and pin 20 Composite Video In.

does that convert the signal to composite??

[oli_ramsay]

Is it set to the correct region? ie PAL or NSTC, I had a similar problem a while back cos it was set to NSTC and I got a black and white fuzzy image.