differnt mem problem

[Snipe343]

1. I opened up CPUZ, and looked in the SPD tab
2. i noticed that i could not find the second stick of ram, that should be in the second slot
3. i check the slot to make shure it was working, it was, i also ran memtest(no error)
4.I put them into slot 1 + 3, they showed up and are running properly, but there not in Dual Channel, so the problem is with DC

Any suggestions?

[Nitro-Max]

Are both slots color coded the same color?? some boards use slot1 +2 for dual
and some use slot1+3 or 2+4 but normally they are color coded so you cant go wrong you should find the other stick in the drop down in cpu-z select slot 3.

[Nitro-Max]

You have the memory set wrong for DUAL use slot 1+2 OR 3+4 look here they are color coded

http://www.gigabyte.com.tw/Products/ViewImage.aspx?ProductID=2695

[ntdouglas]

You have the memory set wrong for DUAL use slot 1+2 OR 3+4 look here they are color coded

http://www.gigabyte.com.tw/Products/ViewImage.aspx?ProductID=2695

Another pointless thread.:rolleyes:

[Snipe343]

you know i said that it as having a problem with DC mode right? As in im not stupid and i know were to put the ram on my board...XD, it just stoped working after i reset the bios, i was jsut woundering if any of you know of a setting that can do something like this