Wanna flash Visiontek HD 3870

[Name Change]

Hi i wanna flash my card so i can overclock it, is there away to flash the bios in windows or only in DOS.

Unsure of bios on my card atm, I only know it is newer model stock clocks or 800/2400. What would be a good bios to use. i see so many in database, would any maker would do. Would it help if i knew bios i had. Thx in advance..

[sneekypeet]

You can flash in both windows and in DOS. My advice is that if you are unsure of the OC capabilities, flash to the unlocked PLL bios(no difference in clocks).

My advice is to OC it the way it is now and find its capabilities.

Then spend some time searching the HD3870 threads as much of this info has been covered a few times!

http://forums.techpowerup.com/showthread.php?t=48544

http://forums.techpowerup.com/showthread.php?t=48426

Also the Bios on your card will be shown in GPU-z ....Overclocking can be done with: ATITool/Rivatuner/CCC OD

If I read that correct 800/1200 is what your card is at now....Possibly using one of RandomMurderer's modded BIOS'

[Name Change]

Thx, So i can use the PLL fix bios in the thread Random Murderer made, so i can just use winflash and go ahead. This bios unlocks HD 3870 to be able to pass 860 core correct?


Standard clocks of my Visiontek 3870 are 800/2400.

[sneekypeet]

well I believe the PLL bios is 775/1125 stock clocks, where Randoms BIOS is higher clocks.

It is recommended to flash in DOS, but I and many others have flashed in Windows.

Lastly yes the PLL is to go past the 862 mark...Randoms BIOS is a modded(clocks) PLL unlocked BIOS.

[Name Change]

well I believe the PLL bios is 775/1125 stock clocks, where Randoms BIOS is higher clocks.

It is recommended to flash in DOS, but I and many others have flashed in Windows.

Lastly yes the PLL is to go past the 862 mark...Randoms BIOS is a modded(clocks) PLL unlocked BIOS.


Thx mate. So i looking at thread would it be best to flash the 8601200.sb bios, since my mem is already is 2400 highest i have gotten it to was 2600 and core 860 lol.

[sneekypeet]

If the core now will do 860 then yes go ahead , but make sure that clock is stable before the flash.

BTW I have to say this , that this will void your warranty and can possibly kill you card outright.

[Name Change]

Thx for warning. So as i click on bios and go program I should go stright ahead even tho it says ID's are mismatch...

[sneekypeet]

there have been a few issues with that. I personally never had a mismatch no too sure if it is ok to flash.

May want to wait for better advice on this part!

Random says if you use the HD38xx BIOS editor you should be able to fix the checksum that is causing the missmatch error.

[Name Change]

Ahh i see cool thx for the help. Ima do some more reading and then decide what ima do.:rockout: