D_o_S
09-17-2005, 05:53 PM
[page=Introduction]
Introduction
Matrix Orbital and VL System are the two main manufacturers of LCD devices for 5.25” bays of our beloved rigs. Today, we will be looking at VL System’s LIS 2 Blue Eye. VL System has been around since 1997 (compared to Matrix Orbital, established in 1995), so their products have enough of a background to build upon. What does L.I.S actually stand for? Believe it or not, it's Lost In Space. I sure do hope that I don't get lost!
Features
Stated by VL System (http://www.vlsys.co.kr/):
HW and SW information
Real time CPU, memory and HDD usage
USB Interface (1.1 and 2.0)
4Ch automatic fan control
Automatic software update
Software skin support
Winamp and Windows Media support
E-mail check
Message alarm
Windows 2000/2003/XP/XP Media Center edition
Packaging
The unit itself comes in a relatively small, but well designed, box. Everything fits snugly, you can see the unit itself through the window on one side. All the components included in the package are listed below the window. The front of the LCD panel also has a protective foil over it, so you are sure to receive an unscratched device.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxwindow.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxtopt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxtopb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxcablet.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxfrontb.jpg)
The contents of the package are:
L.I.S 2 Unit (the display is 2x20)
Installation CD
Manual
3x 3 pin fan extension cable
2x 4 pin fan extension cable
Power cable
Internal USB cable
External USB cable
First Impressions
After opening up the box, I was quite impressed. On the top you find all the manuals/CDs, etc., and below a cardboard divider is the unit itself. It has a sturdy feel to it; the steel used to make the unit is by no means flimsy. The bezel of the unit does not have any buttons, and it is up to you to decide if you like it this way or not.
The only thing that you might be missing in this bundle is a Molex pass-through cable.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/t4.jpg
[Page=Installation]
Installation:
Installing the unit into my CM Stacker was no sweat. It’s exactly the same as with any other 5.25” bay device, just fasten the screws and you’re pretty much done. Don’t forget to connect the power and USB cables, and if you wish, you can connect up to 4 fans to the unit for automatic or manual control. I chose to use the internal USB cable, and there were no compatibility issues with my DFI nF4 motherboard, everything fit perfectly. I would advise that before you screw in the unit, you connect all the cables to the LCD, as plugging them in with the unit inside your case can be quite problematic. After everything was plugged in, I fired up my PC. The unit came to life with a flash of its bright blue LCD, followed by an animation. As I logged on, Windows automatically detected new hardware. I decided to click cancel and download the newest drivers (USB and control center for the LCD) from the internet. I installed the USB drivers first, then the Multimedia control center ones. The unit was incorrectly detected at first. Then Windows came up with another “New hardware found” dialog, which I had to go through before the unit was fully functional. This three step installation is not particularly user friendly, and can scare off some novice users. It would be great if VL System could make an All in One driver package, after which installation would be a breeze.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/installationt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/installationb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/pcbt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/pcbb.jpg)
Software
The unit comes with its own software called Multimedia Control Center. The program starts automatically with windows and sits in your system tray. Each time Windows starts, the unit is detected, and your settings are loaded.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/softwareaboutt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lissoftwareabout.jpg)
The software sports a lot of functions, for example you can set your LCD to show your temps, it can communicate with MBM or SpeedFan, and then show voltages and fan RPM; CPU load and memory load can also be shown. Defining what you want to see is done through input boxes; values such as temp, voltage, etc., are stored as variables and can be included in the text.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpuusaget.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lissoftwarecpub.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/mbm.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lismbm.jpg)
Under auto user, you can set up a routine of the information you want shown, and the unit will automatically alternate between the items.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/techpowerupt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/listechpowerup.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/athlont.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/athlonb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpumemt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpumemb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/voltaget.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/liscputemp.jpg)
I also tried out the unit with MBM 5, using custom settings for my motherboard from the DFI Street website. After the unit detected MBM5, I was given several presets for temperatures, voltages, fan RPM and a user set option.
To complete the system sensor reading abilities section, I finally decided to install Speedfan. The options for Speedfan and MBM5 are exactly the same, so you won't miss out on anything choosing either one - stick to what you prefer.
Moving on; I wanted to see how good the spectrum analyzer function of the unit was, for these purposes I chose to install the Windows Media Player plug-in. I followed the instructions as written in the manual, but at first the unit refused to show anything useful. As soon as I chose the WMPLAYER option from the list, the unit would show Windows Media Play Indicator and just sit there, no matter what song was playing in the background. After a restart of Media Player, the spectrum analyzer came to life. However, I think that this function is perhaps the weakest part of the whole unit - the overdraw of the LCD is just not up to the task of changing data (in this case making columns larger/smaller) quickly. It doesn't look dynamic enough, you can partly solve this mishap if you only have the analyzer on the left hand side of the screen and track info on the right. Here, the unit scrolls continuously so that you can see the full track name. If you thought that this unit could change your PC into a Hi-fi, I suggest that you look somewhere else, you might be disappointed.
Unfortunately, the unit does not scroll from side to side if you enter too much information to be displayed. On one hand this means that you can’t miss what you’re looking for (looking at the unit while it’s scrolling), but you cannot enter more information than the amount that physically fits on the screen of the unit.
You can also choose the font you want for the program's headings and options, although it is not particularly useful, it is a nice touch.
Here (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/autouser.wmv) you can see a short clip (600 KB) of what the auto user option does.
The users who demand more graphic output can use the built in CG Builder:
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cgbuildert.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cgbuilder.jpg)
Through this software you can create logos such as the one above.
As for the fan control, the unit CAN regulate from 0 to 100%, although this is not reccomended due to the heat buildup that would occur at low percentages. As a safety feature, the fan control amount is locked between 70 - 100%, but you can unlock it at your own risk. The fan capacity is 10W (12V, 0.83A), which is just enough to power a 80mm Vantec Tornado, but your amp-hungry Deltas will have to sit out on this one. As the unit is not primarily intended to be a fan controller, I wouldn't take this as a major disadvantage.
[Page= Value and Conclusion]
<table width="100%" cellpadding="5" cellspacing="0" id="result">
<tr><th>http://www.techpowerup.com/images/dollar.gif</th>
<td>
A 5.25” bay LCD device capable of displaying whatever you wish, from current time to CPU load. Its priced around $80, but it’s not something that everyone must have
</td>
</tr><tr>
<th>http://www.techpowerup.com/images/thumbup.gif</th>
<td>
Nice bright blue backlight
Good software
Programmable
CG Logo Builder
</td>
</tr>
<tr>
<th>http://www.techpowerup.com/images/thumbdown.gif</th>
<td>
Software installation is not very user friendly
A little bit of lag when changing settings
Windows Media Player and Winamp spectrum analyzer show slow overdraw
</td></tr>
<tr><th>8.5<td>This unit is a pleasure to work with, and I am sure that I will include it in my future systems. It is practical; for example you can see if you have new e-mail, or set up an alarm with a short text message. Also, it will attract people walking past your PC, especially if you are at a LAN party. Nowadays, color LCDs are finding their way into PC enthusiasts’ rigs, but VL System’s L.I.S 2 Blue eye still has a lot to offer.
</td></tr>
<tr><th></th><td></td></tr>
</table>
Introduction
Matrix Orbital and VL System are the two main manufacturers of LCD devices for 5.25” bays of our beloved rigs. Today, we will be looking at VL System’s LIS 2 Blue Eye. VL System has been around since 1997 (compared to Matrix Orbital, established in 1995), so their products have enough of a background to build upon. What does L.I.S actually stand for? Believe it or not, it's Lost In Space. I sure do hope that I don't get lost!
Features
Stated by VL System (http://www.vlsys.co.kr/):
HW and SW information
Real time CPU, memory and HDD usage
USB Interface (1.1 and 2.0)
4Ch automatic fan control
Automatic software update
Software skin support
Winamp and Windows Media support
E-mail check
Message alarm
Windows 2000/2003/XP/XP Media Center edition
Packaging
The unit itself comes in a relatively small, but well designed, box. Everything fits snugly, you can see the unit itself through the window on one side. All the components included in the package are listed below the window. The front of the LCD panel also has a protective foil over it, so you are sure to receive an unscratched device.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxwindow.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxtopt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxtopb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/boxcablet.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lisboxfrontb.jpg)
The contents of the package are:
L.I.S 2 Unit (the display is 2x20)
Installation CD
Manual
3x 3 pin fan extension cable
2x 4 pin fan extension cable
Power cable
Internal USB cable
External USB cable
First Impressions
After opening up the box, I was quite impressed. On the top you find all the manuals/CDs, etc., and below a cardboard divider is the unit itself. It has a sturdy feel to it; the steel used to make the unit is by no means flimsy. The bezel of the unit does not have any buttons, and it is up to you to decide if you like it this way or not.
The only thing that you might be missing in this bundle is a Molex pass-through cable.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/t4.jpg
[Page=Installation]
Installation:
Installing the unit into my CM Stacker was no sweat. It’s exactly the same as with any other 5.25” bay device, just fasten the screws and you’re pretty much done. Don’t forget to connect the power and USB cables, and if you wish, you can connect up to 4 fans to the unit for automatic or manual control. I chose to use the internal USB cable, and there were no compatibility issues with my DFI nF4 motherboard, everything fit perfectly. I would advise that before you screw in the unit, you connect all the cables to the LCD, as plugging them in with the unit inside your case can be quite problematic. After everything was plugged in, I fired up my PC. The unit came to life with a flash of its bright blue LCD, followed by an animation. As I logged on, Windows automatically detected new hardware. I decided to click cancel and download the newest drivers (USB and control center for the LCD) from the internet. I installed the USB drivers first, then the Multimedia control center ones. The unit was incorrectly detected at first. Then Windows came up with another “New hardware found” dialog, which I had to go through before the unit was fully functional. This three step installation is not particularly user friendly, and can scare off some novice users. It would be great if VL System could make an All in One driver package, after which installation would be a breeze.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/installationt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/installationb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/pcbt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/pcbb.jpg)
Software
The unit comes with its own software called Multimedia Control Center. The program starts automatically with windows and sits in your system tray. Each time Windows starts, the unit is detected, and your settings are loaded.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/softwareaboutt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lissoftwareabout.jpg)
The software sports a lot of functions, for example you can set your LCD to show your temps, it can communicate with MBM or SpeedFan, and then show voltages and fan RPM; CPU load and memory load can also be shown. Defining what you want to see is done through input boxes; values such as temp, voltage, etc., are stored as variables and can be included in the text.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpuusaget.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lissoftwarecpub.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/mbm.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/lismbm.jpg)
Under auto user, you can set up a routine of the information you want shown, and the unit will automatically alternate between the items.
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/techpowerupt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/listechpowerup.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/athlont.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/athlonb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpumemt.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cpumemb.jpg)http://www.techpowerup.com/reviews/VLSystem/LIS2/images/voltaget.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/liscputemp.jpg)
I also tried out the unit with MBM 5, using custom settings for my motherboard from the DFI Street website. After the unit detected MBM5, I was given several presets for temperatures, voltages, fan RPM and a user set option.
To complete the system sensor reading abilities section, I finally decided to install Speedfan. The options for Speedfan and MBM5 are exactly the same, so you won't miss out on anything choosing either one - stick to what you prefer.
Moving on; I wanted to see how good the spectrum analyzer function of the unit was, for these purposes I chose to install the Windows Media Player plug-in. I followed the instructions as written in the manual, but at first the unit refused to show anything useful. As soon as I chose the WMPLAYER option from the list, the unit would show Windows Media Play Indicator and just sit there, no matter what song was playing in the background. After a restart of Media Player, the spectrum analyzer came to life. However, I think that this function is perhaps the weakest part of the whole unit - the overdraw of the LCD is just not up to the task of changing data (in this case making columns larger/smaller) quickly. It doesn't look dynamic enough, you can partly solve this mishap if you only have the analyzer on the left hand side of the screen and track info on the right. Here, the unit scrolls continuously so that you can see the full track name. If you thought that this unit could change your PC into a Hi-fi, I suggest that you look somewhere else, you might be disappointed.
Unfortunately, the unit does not scroll from side to side if you enter too much information to be displayed. On one hand this means that you can’t miss what you’re looking for (looking at the unit while it’s scrolling), but you cannot enter more information than the amount that physically fits on the screen of the unit.
You can also choose the font you want for the program's headings and options, although it is not particularly useful, it is a nice touch.
Here (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/autouser.wmv) you can see a short clip (600 KB) of what the auto user option does.
The users who demand more graphic output can use the built in CG Builder:
http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cgbuildert.jpg (http://www.techpowerup.com/reviews/VLSystem/LIS2/images/cgbuilder.jpg)
Through this software you can create logos such as the one above.
As for the fan control, the unit CAN regulate from 0 to 100%, although this is not reccomended due to the heat buildup that would occur at low percentages. As a safety feature, the fan control amount is locked between 70 - 100%, but you can unlock it at your own risk. The fan capacity is 10W (12V, 0.83A), which is just enough to power a 80mm Vantec Tornado, but your amp-hungry Deltas will have to sit out on this one. As the unit is not primarily intended to be a fan controller, I wouldn't take this as a major disadvantage.
[Page= Value and Conclusion]
<table width="100%" cellpadding="5" cellspacing="0" id="result">
<tr><th>http://www.techpowerup.com/images/dollar.gif</th>
<td>
A 5.25” bay LCD device capable of displaying whatever you wish, from current time to CPU load. Its priced around $80, but it’s not something that everyone must have
</td>
</tr><tr>
<th>http://www.techpowerup.com/images/thumbup.gif</th>
<td>
Nice bright blue backlight
Good software
Programmable
CG Logo Builder
</td>
</tr>
<tr>
<th>http://www.techpowerup.com/images/thumbdown.gif</th>
<td>
Software installation is not very user friendly
A little bit of lag when changing settings
Windows Media Player and Winamp spectrum analyzer show slow overdraw
</td></tr>
<tr><th>8.5<td>This unit is a pleasure to work with, and I am sure that I will include it in my future systems. It is practical; for example you can see if you have new e-mail, or set up an alarm with a short text message. Also, it will attract people walking past your PC, especially if you are at a LAN party. Nowadays, color LCDs are finding their way into PC enthusiasts’ rigs, but VL System’s L.I.S 2 Blue eye still has a lot to offer.
</td></tr>
<tr><th></th><td></td></tr>
</table>