hd 3870 help

[fafa21]

i have an powercolor hd 3870 and the core clock is allways set at 800 how do i enabole it to be at 300 when im not playing a game

[sneekypeet]

I had the same issue, couldnt correct the issue without reinstalling the drivers. Also I do believe it was only with the newer 8 series drivers. I went back to the crysis fix drivers and all is good again!

[fafa21]

so i drive do i need to download like the driver 7.12

[sneekypeet]

Here (http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=30533) is a link to where you can get it ...scroll down and see the links for XP or Vista. Get it and save it to desktop.

Then I run the driver CD and install the hotfix over the top.

Make sure to completely remove the old drivers before going through this! I suggest add/remove programs>>> delete drivers>>>> restart.

Get back to desktop and run a registry cleaner>>>restart.

Then do the install....sorry I kinda put the cart before the horse here:laugh:

[fafa21]

how do i run a registry cleaner ?

[sneekypeet]

sorry download this (http://www.ccleaner.com/) and install it. Open Cleaner click on the blue registry cube at left. run it and fix entries. no need to back it up!

[fafa21]

you said to run the driver CD and install the hotfix over the top. so you mean to install the cd driver and then after that install the hotfix or am i getting the completely wrong

[sneekypeet]

I installed the driver (CCC) off of disc. restart of course....then runt the Crysisfix...let it do all the swapping and installing . Should be good to go.

Also if the CD CCC is in , go to overdrive and see if the clocks are correct. The application of the crysisfix I needed because I played Crysis( demo needs it as well).

Personally this combination of drivers has netted me my best 3D06 score as well!

[fafa21]

ok i did all that but it still says that the gpu clock is 800

[sneekypeet]

Sorry to hear that...it took care of my issue. Maybe someone else here has a better idea for ya.

[Dr. Spankenstein]

Not to insult you, but are you looking at the Current clocks section near the very bottom of the Overdrive page?

I have to say that these 8.1/8.2 drivers have something built-in that is doing a lot of "extra" stuff. (and not in a good way...)

[fafa21]

yeah and allso in gpu-z

[Random Murderer]

yeah and allso in gpu-z

gpuz shows your 3d clocks, not your current clocks.
the only sure way to know what the current clocks are is to use the monitoring tool in rivatuner.

[Dr. Spankenstein]

And you've never flashed the BIOS? This is out-of-the-box behavior?

[fafa21]

Yup. but it's not a regular card it came with an after marke cooler and is factory oc so maybe that's why.

[Dr. Spankenstein]

All the literature for you card says it should include ATI Powerplay.

Have you verified via RivaTuner that it runs @ 800MHz while idle? Are your temps high?

If it truly is running @ 800MHz all the time, you need to send that puppy back.

Give us a screenshot that has Riva/CCC/GPU-z. Preferably Riva.

[sneekypeet]

I had to uninstall everything...now that Im thinking more.I had to take out ATItool and Riva to get back to stock 300MHz.

If you have not OC'd then overdrive once unlocked, will show 300 idle if it is.

[trog100]

the rivatuner monitor is the best tool to show whats really happening and when..

trog

[fafa21]

here is what riva tuner says

ffffffffff ATI specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0900000000 Graphics core : RV670 (320sp)
$0900000002 Memory bus : 256-bit
$0900000001 Memory type : DDR4 SGRAM
$0900000003 Memory amount : 512MB
$0900000004 Core clock : 796.500MHz
$0900000005 Memory clock : 1170.000MHz (2340.000MHz effective)
$0900000006 Reference clock : 27.000MHz
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1170MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1170MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4

[Random Murderer]

here is what riva tuner says

ffffffffff ATI specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0900000000 Graphics core : RV670 (320sp)
$0900000002 Memory bus : 256-bit
$0900000001 Memory type : DDR4 SGRAM
$0900000003 Memory amount : 512MB
$0900000004 Core clock : 796.500MHz
$0900000005 Memory clock : 1170.000MHz (2340.000MHz effective)
$0900000006 Reference clock : 27.000MHz
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1170MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1170MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4

according to that, your powerplay clocks are 800...
send that card back!

[fafa21]

here is a screan shot of my of ccc and gpuz. ccc was working fine yesterday idk why it says that now.

http://img.techpowerup.org/080224/2089.jpg

[zaqwsx]

I have the same problem with my powercolor and on top of that my memory clock is off. I have the HD3870 PCS version.

[fafa21]

i really dont whant to send it back is there a bio i can download that will fix this

[zaqwsx]

Here is what mine says:

Edit: If you look at the title of the bios we have diffrent ones, weird.

Display adapter information
$ffffffffff ----------------------------------------------------------------
$0000000000 Description : ATI Radeon HD 3800 Series
$0000000001 Vendor ID : 1002 (ATI)
$0000000002 Device ID : 9501
$0000000003 Location : bus 1, device 0, function 0
$0000000004 Bus type : PCIE
$000000000f PCIE link width : 16x supported, 16x selected
$0000000009 Base address 0 : d0000000 (memory range)
$000000000a Base address 1 : none
$000000000b Base address 2 : fe6f0000 (memory range)
$000000000c Base address 3 : none
$000000000d Base address 4 : 00008000 (I/O range)
$000000000e Base address 5 : none
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0900000000 Graphics core : RV670 (320sp)
$0900000002 Memory bus : 256-bit
$0900000001 Memory type : DDR4 SGRAM
$0900000003 Memory amount : 512MB
$0900000004 Core clock : 796.500MHz
$0900000005 Memory clock : 1125.000MHz (2250.000MHz effective)
$0900000006 Reference clock : 27.000MHz
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C27CBA.SFH
$0a00000001 Date/time : 12/26/07 23:36
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1126.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1126MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1126MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1126MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1126MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1126MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1126MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4

[fafa21]

Here is what mine says:

Edit: If you look at the title of the bios we have diffrent ones, weird.

Display adapter information
$ffffffffff ----------------------------------------------------------------
$0000000000 Description : ATI Radeon HD 3800 Series
$0000000001 Vendor ID : 1002 (ATI)
$0000000002 Device ID : 9501
$0000000003 Location : bus 1, device 0, function 0
$0000000004 Bus type : PCIE
$000000000f PCIE link width : 16x supported, 16x selected
$0000000009 Base address 0 : d0000000 (memory range)
$000000000a Base address 1 : none
$000000000b Base address 2 : fe6f0000 (memory range)
$000000000c Base address 3 : none
$000000000d Base address 4 : 00008000 (I/O range)
$000000000e Base address 5 : none
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI specific display adapter information
$ffffffffff ----------------------------------------------------------------
$0900000000 Graphics core : RV670 (320sp)
$0900000002 Memory bus : 256-bit
$0900000001 Memory type : DDR4 SGRAM
$0900000003 Memory amount : 512MB
$0900000004 Core clock : 796.500MHz
$0900000005 Memory clock : 1125.000MHz (2250.000MHz effective)
$0900000006 Reference clock : 27.000MHz
$ffffffffff ----------------------------------------------------------------
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C27CBA.SFH
$0a00000001 Date/time : 12/26/07 23:36
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1126.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1126MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1126MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1126MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1126MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1126MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1126MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4

dose yours work like it's suposed to

[zaqwsx]

No, it dose the same thing as yours and on top of that my memory clocks are messed up there 1126 not 1170 like they should be. I also just got this card a copule days ago and im thinking about returning it to newegg and getting one from sapphire. I don't think im going to buy powercolor anymore.

[fafa21]

so can some one post a bio that works so i can flash it

[fafa21]

so can some one post a bio that works so i can flash it

or is that not posible and i need to send it back to new egg

[zaqwsx]

Newegg dosn't have these cards anymore and If you send it back they might just refund your money. Also for some reason there are no good HD3870 on newegg for some reason.

Here is the link of the card: http://www.newegg.com/product/product.aspx?Item=N82E16814131077

Edit: BTW how much did you pay for the card and what are your temps?

[fafa21]

i payed 244$ and my temps are 27c idle and 45 load

[zaqwsx]

I paid $254 my temps are 37c idle 50c load.

[sneekypeet]

I still think this is a driver issue. Try using Driver Cleaner this time instead of Cleaner. I have seen all of those screenies myself. After a couple of tries I got mine working just fine!

[fafa21]

I still think this is a driver issue. Try using Driver Cleaner this time instead of Cleaner. I have seen all of those screenies myself. After a couple of tries I got mine working just fine!

can you go into rivatuner and show us what you bio says

[sneekypeet]

can you go into rivatuner and show us what you bio says

Wish I could, but as of late I have no mobo for that system, so my HD3870 is on a bit of a vacation,untill I get a new mobo.....sorry!

But I didi notice if you had tried to OC with riva sometimes it locks on....I PM W1zzard about it....he said to try a different driver. Took me 3 attempts before I got mine back to correct operational settings.

EDIT:...my assumption is when you are removing the drivers , there are "bits" left in the windows System32, and Prefetch folders in the C: drive.

[fafa21]

well i uninstaled ati tool cus it got ccc messed up. and i was thinking maybe that it was stoping it from going into powerplay mod. but it still doesn't work

[fafa21]

should i download this bio http://www.techpowerup.com/vgabios/details.php?id=1000 and is there a way i can save my old one allso how do i flash it

[sneekypeet]

I uninstalled everything graphics related when I had the issue...Atitool, riva , and CCC.

Im anal about my drivers tho.....I really go uninstall those 3 things>>>>restart

run Ccleaner, and Driver Cleaner pro(with all ATI cleaners run in the box at once)>>>>restart

Run APK registry Cleaner to be sure( anal and takes a while)>>>restart

ADVANCED
Start>>>>My Computer>>>>C:>>>>Windows(most likely needs unlocked to see )>>>>then I look and remove the leftover bits in the prefetch and System32 folders here. BE CAREFUL. If you own a ATI chipset mobo , you need to verify before removal. Being on an Intel X38 this will not be an issue, you can remove all ATI related bits!>>>restart



After all of that I reinstalled the drivers...allowing me to recover my 300MHz clockrate.

If you go through all of that and it still will not respond correctly to just the CD driver install( no need to patch )????? I'd get set to RMA.

[fafa21]

so if i want to flash a new bio on my card i need to use ati winflash and then just hit load image and select this bio http://www.techpowerup.com/vgabios/details.php?id=1000 ? or is this totally wrong

[sneekypeet]

so if i want to flash a new bio on my card i need to use ati winflash and then just hit load image and select this bio http://www.techpowerup.com/vgabios/details.php?id=1000 ? or is this totally wrong

If you want to flash it yes , load image. Also save the original. If it doesnt work by flashing it, then you can still reapply the original BIOS and possibly still RMA

[fafa21]

to save the original one i need to just hit save on ati winflash?

[DaedalusHelios]

Sorry this is off topic but I couldn't help myself wondering.....

fafa21..... your System specs says 1,200 3dmarks.... don't you mean 12,000 :laugh:

After all, your processor is better than the one in my system specs. :)

[fafa21]

Sorry this is off topic but I couldn't help myself wondering.....

fafa21..... your System specs says 1,200 3dmarks.... don't you mean 12,000 :laugh:

After all, your processor is better than the one in my system specs. :)

oh ops yeah it's supposed to be 12,000 still can get used to it. i used to get 300 in my last system

[sneekypeet]

hey fafa...we could go to TPU chat and try to talk this out?

Maybe Dr. Spank and the rest will show up and help as well.

The thing thats leading me to still insist on drivers is the screenie of CCC with issues!

[fafa21]

hey fafa...we could go to TPU chat and try to talk this out?

Maybe Dr. Spank and the rest will show up and help as well.

The thing thats leading me to still insist on drivers is the screenie of CCC with issues!

yeah but can you send me a link cus i don't know where it is

[sneekypeet]

http://www.techpowerup.com/chat/

Its on the right side of the homepage

[fafa21]

i dont think it's working cus everything is blanked out

[sneekypeet]

you are in there like 3X's

from btarunr http://forums.techpowerup.com/showthread.php?t=52444

[fafa21]

well this is what i see

http://img.techpowerup.org/080224/not working.jpg

[sneekypeet]

IDK it works fine for me....maybe a 3rd party IRC is needed. No bother tho I will just try to help from here.

[quasar923]

dude your done

[sneekypeet]

dude your done

What does this refer to?:confused:

[fafa21]

nvm it's too much work to get into the chat room and i have homework to do. so you think that if i flash the bio it wont do anything should i do it or could it mess my card up

[sneekypeet]

well there is a chance to kill the card yes...if done correctly there is less chance of that. I have flashed mine and it worked . When I had the clock issue tho it was entirely driver based. the Bios is only going to set the PLL change or fan speeds , not what you are looking for!

[fafa21]

ok but i already unistaled all my drivers yesterday and then reinstled them and that didn't work. but i need that bio anyway so ill be able to oc it. but it wont let me flash it with ati winflash so how should i do it

[sneekypeet]

in DOS with a forced flash. I suggest you do some reading up if you have never flashed in DOS

[DaedalusHelios]

I believe there is more apps than just Winflash......

i believe its command line though.

http://www.mvktech.net/component/option,com_remository/Itemid,26/func,fileinfo/filecatid,2266/parent,category/

[fafa21]

i fixed my problem i had to download a bios editor and change my 2d clock from 800 to 300 and mem to 1126 and 1.33 vcor and my uvd clock to 300 and mem 1126 and 1.26 vcor

befor

$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1170MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1170MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4


after
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.33V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.33V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.33V
$0a00030001 PowerPlay state 1 : 300MHz/1126MHz/1.33V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.33V
$0a00030002 PowerPlay state 2 : 300MHz/1126MHz/1.33V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.33V
$0a00030003 PowerPlay state 3 : 300MHz/1126MHz/1.33V/UVD
$0a00030103 Performance level 1 : 300MHz/1126MHz/1.33V
$0a00030203 Performance level 2 : 300MHz/1126MHz/1.33V
$0a00000008 Memory type : DDR4

[DaedalusHelios]

i fixed my problem i had to download a bios editor and change my 2d clock from 800 to 300 and mem to 1126 and 1.33 vcor and my uvd clock to 300 and mem 1126 and 1.26 vcor

befor

$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.30V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.30V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.30V
$0a00030001 PowerPlay state 1 : 800MHz/1170MHz/1.26V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030002 PowerPlay state 2 : 800MHz/1170MHz/1.26V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.30V
$0a00030003 PowerPlay state 3 : 700MHz/1126MHz/1.30V/UVD
$0a00030103 Performance level 1 : 700MHz/1126MHz/1.30V
$0a00030203 Performance level 2 : 700MHz/1126MHz/1.30V
$0a00000008 Memory type : DDR4


after
$ffffffffff ATI VGA BIOS information
$ffffffffff ----------------------------------------------------------------
$0a00000000 Title : 113-B33901-024 RV670 GDDR4 512MB 1787-78C26CBE.SFH
$0a00000001 Date/time : 12/26/07 03:10
$0a00000002 Core clock : 800.000MHz
$0a00000003 Memory clock : 1170.000MHz
$0a00000004 Reference clock : 27.000MHz
$0a00030000 PowerPlay state 0 : 777MHz/1126MHz/1.33V/boot
$0a00030100 Performance level 1 : 777MHz/1126MHz/1.33V
$0a00030200 Performance level 2 : 777MHz/1126MHz/1.33V
$0a00030001 PowerPlay state 1 : 300MHz/1126MHz/1.33V/Overdrive
$0a00030101 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030201 Performance level 2 : 800MHz/1170MHz/1.33V
$0a00030002 PowerPlay state 2 : 300MHz/1126MHz/1.33V
$0a00030102 Performance level 1 : 800MHz/1170MHz/1.26V
$0a00030202 Performance level 2 : 800MHz/1170MHz/1.33V
$0a00030003 PowerPlay state 3 : 300MHz/1126MHz/1.33V/UVD
$0a00030103 Performance level 1 : 300MHz/1126MHz/1.33V
$0a00030203 Performance level 2 : 300MHz/1126MHz/1.33V
$0a00000008 Memory type : DDR4

Not bad. A job well done. ;)