PDA

View Full Version : Vcore Jumper


jdsilver86
02-29-2008, 12:53 AM
I have a FIC VC19, and have read that someone, somewhere, increased the VCORE via a jumper on the board. This mobo has no BIOS voltage adjustment options, and no specified vcore jumpers on itself. But if someone can tell me how to tweak the vcore, I'd appreciate it.

largon
02-29-2008, 01:10 AM
If there is such a jumper it's most likely located near the 4-pin "P4" power connector between AGP and CPU socket.

francis511
02-29-2008, 01:18 AM
Can`t you get the manual ?

tiys
02-29-2008, 01:33 AM
I'm fairly certain that if you can't control the volt's in BIOS, then you can't do it...

But I may be wrong though..

jdsilver86
02-29-2008, 05:29 AM
Thanks for all the replies. I'll check that out Largon.

Francis: There is no specified jumper in the manual.

francis511
02-29-2008, 12:54 PM
Thanks for all the replies. I'll check that out Largon.

Francis: There is no specified jumper in the manual.

Not even a diagram ? I have a couple of motherboards with jumpers just like you describe.

ZenZimZaliben
02-29-2008, 03:49 PM
This board has no voltage control in the bios OR using jumpers. The only way you can increase the voltage is by using a modified bios.

largon
02-29-2008, 09:42 PM
And a hardmod.