[FS][WTTF][US]680i Based Board

[JrRacinFan]

As the title states, I am willing to trade an AW9D-Max with all accessories/bios 16 pre-flashed preferably for a 650i/680i based board or a single slot PCI-e x16 P31 based board.

Must have SLi if wanting to trade a 650i/680i.

Currently, I cannot produce any pictures as my digital camera is broken.

If wanting to purchase the AW9D-Max alone I am asking for $85 shipped FIRM!

Thanks everyone!

[JrRacinFan]

ttt

Also to add, the motherboard for trade has all accessories and driver disks (Thanks Sneekypeet!).

[cdawall]

bump for a good member :D

[Ravenas]

I'll sell you mine for 130 dollars, but can't trade.

GA-N680SLI-DQ6

[JrRacinFan]

I would buy it but the other half says no, If anything it would have to be a trade.

[Ravenas]

I would buy it but the other half says no, If anything it would have to be a trade.

Hehe, up to you, 300$ mobo for 130$. Can't trade though.

Hey, at least you got a bump =D

[JrRacinFan]

Yeah, I would buy it in a heartbeat man. Thanks.

[JrRacinFan]

Well friendly courteous bump. Even an AM2 pro/SLi motherboard combo trade for my ABit/e1200 combo would work for me.

One restriction on that would be the proc would have to be at least an X2 4000+.

[newtekie1]

When my eVGA 780i board comes from eVGA's step-up program in I'll be getting rid of one of mine. If you are still looking, I might trade it to you for the AW9D-Max assuming it can crossfire my two x1950Pros(it should be able to,right?).

I'll probably be getting rid of the P5N-E(650i) board, but it might be the P5N32-E(680i).

Of course I doubt you want my 939 board with the 4400+ for the Abit/e1200 combo. :)

[JrRacinFan]

Should not have any issues. It does x8+x8.

Which board is the 939?

EDIT: The P5N32E would be awesome, but the P5n-E is just as nice.

[newtekie1]

The 939 board is the A8N32-SLI Deluxe, it does x16+x16 SLI.

I can tell you that the P5N-E is a nice overclocker also, but it is limitted by it's passive chipset heatsink, the chipset gets kind of hot. But a good chipset replacement should solve the problem.

[JrRacinFan]

Oh hey, also I see you got 7600GT's matched on that P5N-e board. With the "right" drivers this board will do 6/7 series SLi as well.

Also, max fsb I have had it to is 413 but like always YMMV.

EDIT: I think I may pass on the 4400+. I won't have any ram to pair with it unless it's DDR2 based.

[sneekypeet]

Oh hey, also I see you got 7600GT's matched on that P5N-e board. With the "right" drivers this board will do 6/7 series SLi as well.

Also, max fsb I have had it to is 413 but like always YMMV.

EDIT: I think I may pass on the 4400+. I won't have any ram to pair with it unless it's DDR2 based.

thought this might help to express your point!
http://img.techpowerup.org/080308/900wires3.jpg


BUMP

[JrRacinFan]

Yeah Sneeky, thanks for that. My whole original idea when I purchased the board from you was to pickup another 7600GS and wait for HD4xxx's.

But, as you can tell that has gone down the drain as soon as I bought an 8600GT.

[newtekie1]

Oh hey, also I see you got 7600GT's matched on that P5N-e board. With the "right" drivers this board will do 6/7 series SLi as well.

Also, max fsb I have had it to is 413 but like always YMMV.

EDIT: I think I may pass on the 4400+. I won't have any ram to pair with it unless it's DDR2 based.

Yeah, I figured the 4400+ was a no go. :) I just wanted to throw it out there.:toast:

Yeah, I know the Abit does SLI with hacked drivers, but I would probably throw my x1950Pros in it for Crossfire and avoid dealing with hacked drivers and throw the 7600GTs in the 939 machine.

[JrRacinFan]

Mmk, sounds like a plan. Just let me know when you want to trade.

[allen337]

When my eVGA 780i board comes from eVGA's step-up program in I'll be getting rid of one of mine. If you are still looking, I might trade it to you for the AW9D-Max assuming it can crossfire my two x1950Pros(it should be able to,right?).

I'll probably be getting rid of the P5N-E(650i) board, but it might be the P5N32-E(680i).

Of course I doubt you want my 939 board with the 4400+ for the Abit/e1200 combo. :)



got my aw9d max running 2 2900s just fine with 15bios

[nflesher87]

bump tha racin fan :rockout:

[newtekie1]

Mmk, sounds like a plan. Just let me know when you want to trade.

OK, I'm still 796th in the que waiting for a new 780i board, eVGA is really dragging their feet about getting people new boards. I have been in the que a month now, but I started 2000th in the que, so I am hoping by the end of March, if you can wait that long.

[JrRacinFan]

Of course man, I don't plan on upgrading graphics again anytime soon. ;)

[JrRacinFan]

ttt

@newtekie

Still really haven't decided on the board to trade?

[JrRacinFan]

ttt

[candle_86]

hmm well its not SLI based, but ill throw in a decent GPU for your intel board and proc

ECS Nforce4M w X2 4200 and 1900XTX for trade if interested, also note there is a chance the 1900XTX could get sold so let me know ASAP

[newtekie1]

Still really haven't decided on the board to trade?

I think I've decided it's going to be the P5N-E SLI.

[JrRacinFan]

@candle
Thanks but no thanks.

@newtekie
Ok, cool. That will be fine.

[JrRacinFan]

ttt

Newtekie, any word on the RMA? We still a go?

[JrRacinFan]

Thanks for everyone who had PM'd. This thread may be closed if mods deem necessary. Decided not for sale/trade at this time.

[3991vhtes]

bump for a good guy :)