[FS] Swiftech MCW6005-T775 TEC Water Block for Intel LGA 775 - BRAND NEW IN BOX

[TheGoat Eater]

Delivered yesterday - processor died Friday:cry: so must sell as I will be using money to get a new proc:banghead:

ASKING $155 shipped via USPS

http://img169.imageshack.us/img169/6311/img4055gj2.jpg





heat - rleiserowitz01 15-0-0
eBay -rleiseorwitz01 100% positive w/ 203

[philbrown23]

wow thats a bummer! does it come with the insulation/dielectric grease/conformal coating needed to actually run the thing?

[nflesher87]

wow thats a bummer! does it come with the insulation/dielectric grease/conformal coating needed to actually run the thing?

my question as well :)

[fitseries3]

LOL!!! i have the same block and it's for sale too! works great. i love it. i just dont use it.

[TheGoat Eater]

If needed... - you will need to add $27 for this stuff (NO BEER:toast::slap:) and it cost me about $32 and I will ship all for $180 (USPS PRIORITY)

ALL BRAND NEW

the insulation stuff will not be bundled as I need it for starting my DICE runs

http://img182.imageshack.us/img182/3923/beerkz5.jpg


If it doesn't sell right away it may tempt me to get an E8500 instead of a naked QX9770 for OCing

[fitseries3]

if this helps any...

http://forums.techpowerup.com/attachment.php?attachmentid=13805&stc=1&d=1208920651

http://forums.techpowerup.com/attachment.php?attachmentid=13806&stc=1&d=1208920662

[DaMulta]

fitseries3 what volts are you using?

[fitseries3]

im using a silverstone decathlon 850 watt psu. it's got 65amps on the single 12v rail.

the TEC block is on it's own power cable and the only other thing on the PSU is 3 120mm fans and the laing D5.

[DaMulta]

So your not getting the full use out of it then. I belive this block takes 15v, and 17v is where is would really start freezeing.

When I tried to run a 180watt tec on a 12v line it would not cut the butter.


You need a meanwell:)

I'm 90% sure he meant vcore ;)

It's clearly freezing on the table not a cpu...:)

[fitseries3]

like i said.... i never use it man. i have no use for it. that's why im selling it.

[DaMulta]

Too bad it's a nice block.

[fitseries3]

i know. i had intended on using it but im too much of a "pussy" lol!!!

[rangerone766]

if i didnt need to do all the insulating to use one of those, i'd buy one.

gl with the sale

[DaMulta]

Don't be scared go get a meanwell, and really watch it freeze.

If you need help getting your board ready I'm here.

Systems running at -30 24/7 isn't that hard to do:).

[TheGoat Eater]

bump - added a Earthwatts 430 PSU and memory in my new FS thread make an offer on anything...

[nflesher87]

bump - added a Earthwatts 430 PSU make an offer on eiither

no you didn't :)

[TheGoat Eater]

switched to my new memory thread as the edited title didn't work - will fix...

[mrw1986]

Will a D5 + BIXII be enough to cool the TEC on a Q6600 / QX9650?

[TheGoat Eater]

I would recommend a bigger TEC - as per Damulta - as a 226 would be best for a dual or single core - also a Meanwell would be recommended for the PSU for it - also a Criticool unit ... if I sell my memory I may take this off the block as I see the E8500s in stock... a 65nm quad and even a 45nm quad will be too much loa for a 226watt TEC - though you could mod it with a bigger TEC

[mrw1986]

Well, I know about the Meanwell. I'll look into a bigger TEC. My main question is if the D5 + BIXII is enough to cool the hot side of a TEC...I know if you don't take heat away from them fast enough bad things happen.

EDIT: Actually just read some info that might not make me use TEC. The fact that you generally don't want to push higher voltage on the CPU when using TEC.

[TheGoat Eater]

BIXII = Black Ice Extreme II right (http://www.dangerden.com/store/product.php?productid=2&cat=5&page=1)?
That is what i was going to use, I would say yes should be enough if just a CPU loop.. or a triple... D5 is also what i was going to use;)

[mrw1986]

Right!

[DaMulta]

That should be what you need to cool it. Just keep the fans a moven.

I cooled two 180wtt tecs with that rad just fine.

It will work on a quad it just will not be freezing when the voltage starts to get up there. It will be better than just water tho.

[Morgoth]

where do you live and how mutch watt is that tec? mybe i buy it

[philbrown23]

hey Damulta, my tec setup is coming soon, would you be able to help me set up my board for it? I have all the grease and coating etc. but am a little unsure how exactly to do it all.

[rangerone766]

hey Damulta, my tec setup is coming soon, would you be able to help me set up my board for it? I have all the grease and coating etc. but am a little unsure how exactly to do it all.

when you set up that tec, can you do a small write up and pics? i'm curious and thinking of doing the same.

[TheGoat Eater]

where do you live and how mutch watt is that tec? mybe i buy it

US- Des Moines, Iowa

226 watt TEC

[DaMulta]

hey Damulta, my tec setup is coming soon, would you be able to help me set up my board for it? I have all the grease and coating etc. but am a little unsure how exactly to do it all.

yep

[TheGoat Eater]

bump - anybody want to make a reasonable offer - will consider offers...

[Morgoth]

US- Des Moines, Iowa

226 watt TEC

is there also a mounting kit for s478?

[TheGoat Eater]

from what the box says it is LGA s775 only... not sure if there is an aftermarket kit for s478 as you would need a different mount and gaskets for it....

[Morgoth]

damn

[TheGoat Eater]

BUMP - anybody looking for a deal - make an offer (reasonable) as this was never used and if I don't sell it soon it will not be available as I will end up using it on my E8500...