commandercup
05-02-2008, 03:44 AM
SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax
SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax
SOLD TO: Xazax SOLD TO: Xazax vSOLD TO: XazaxSOLD TO: Xazax
SOLD TO: Xazax
SOLD TO: Xazax
I was going to modify this case... and make a nice project out of it, but I ran out of ideas for this particular case! So its for sale...
I'll let it go for $100 shipped... thats what it seems to retail for online (WITHOUT SHIPPING!)... You'll get free first class USPS shipping. Insurance is optional but recommended...
Wants:
-Cash
-CPU Coolers
-Stock cases
-Monitors
(I can add up to $100 for anything listed above)
The interior and front/back have been spray painted black... some places have a little overspray, but nothing is really noticable.
Here are some pictures of how it has been modified from stock.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00872.jpg
Right now the window looks kind of weird because the U-Channel is on a rounded edge, I'll move it to the straight side so the crease doesn't show
When not in direct light, the acrylic is slightly more opaque (darker)
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00836.jpg
I cut out the support bars in the front 120mm intake area.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00858.jpg
Heres a picture of a ventilation hole I cut out in the back for the expansion cards. Its been covered with u-channel so that the ugly edge isn't showing. I'll mount some silver circular modder's mesh to cover it on the inside if you request it.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00875.jpg
These are some ventilation holes I cut out on the motherboard tray to create ventilation for the motherboard itself.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00878.jpg
This is a ghetto cut I did on the side of the drive bay mounts in which I installed the HDD bay attachment that normally goes under the drive bays. It looks quite ugly , but it functions fine and hides the HDD's (from the left side view, you wont see any cuts... this is the back side so it doesn't really matter what it looks like)
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00874.jpg
Heres the HDD bay mounted and ready to go! Looks sweet ey?
http://www.bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00829.jpg
An A.C. Ryan rad grill mounted on the top of the case where you can either fit a 240mm radiator or two 120mm fans, the handle is also preinstalled (this is slightly off kilter, you can remove it simply by unscrewing it if you wish.)
http://www.asipartner.com/ocadmin/images/42964.jpg
Heres the actual stock view.
SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax SOLD TO: Xazax
SOLD TO: Xazax SOLD TO: Xazax vSOLD TO: XazaxSOLD TO: Xazax
SOLD TO: Xazax
SOLD TO: Xazax
I was going to modify this case... and make a nice project out of it, but I ran out of ideas for this particular case! So its for sale...
I'll let it go for $100 shipped... thats what it seems to retail for online (WITHOUT SHIPPING!)... You'll get free first class USPS shipping. Insurance is optional but recommended...
Wants:
-Cash
-CPU Coolers
-Stock cases
-Monitors
(I can add up to $100 for anything listed above)
The interior and front/back have been spray painted black... some places have a little overspray, but nothing is really noticable.
Here are some pictures of how it has been modified from stock.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00872.jpg
Right now the window looks kind of weird because the U-Channel is on a rounded edge, I'll move it to the straight side so the crease doesn't show
When not in direct light, the acrylic is slightly more opaque (darker)
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00836.jpg
I cut out the support bars in the front 120mm intake area.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00858.jpg
Heres a picture of a ventilation hole I cut out in the back for the expansion cards. Its been covered with u-channel so that the ugly edge isn't showing. I'll mount some silver circular modder's mesh to cover it on the inside if you request it.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00875.jpg
These are some ventilation holes I cut out on the motherboard tray to create ventilation for the motherboard itself.
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00878.jpg
This is a ghetto cut I did on the side of the drive bay mounts in which I installed the HDD bay attachment that normally goes under the drive bays. It looks quite ugly , but it functions fine and hides the HDD's (from the left side view, you wont see any cuts... this is the back side so it doesn't really matter what it looks like)
http://bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00874.jpg
Heres the HDD bay mounted and ready to go! Looks sweet ey?
http://www.bjkdesign.com/albums/Projekt_Functionalitic/normal_DSC00829.jpg
An A.C. Ryan rad grill mounted on the top of the case where you can either fit a 240mm radiator or two 120mm fans, the handle is also preinstalled (this is slightly off kilter, you can remove it simply by unscrewing it if you wish.)
http://www.asipartner.com/ocadmin/images/42964.jpg
Heres the actual stock view.