Help with an ASUS M2n-SLI!

[kyle2020]

Ok, i have posted about an overclocking adventure in the overclocking section (found in my signature) however i have struck a problem. in BIOS, my settings will only allow me to raise my CPU voltages to 1.35V. Now when i use crystalCPUID, i can the only take it up to 1.39V. Has anyone else experience a similar problem and knows a fix? i flashed my bios to the latest however the result is still the same. So, anyone know anything?

*(please note, im not willing to do any pencil mods)*

[kyle2020]

im going to try flashing my bios to a previous release, seeing as the latest is a beta release. If the doesnt work, ill try setting voltage to auto then try some multiplier changes.

[JrRacinFan]

Little information kyle. On that board that is the highest no matter what you do.

EDIT: But try the older bios.

[Urbklr]

I recall having the same issue, but with my old M2R32-MVP. It was a problem with the newer beta bios for me, try flashing to an older bios.:)

[kyle2020]

I recall having the same issue, but with my old M2R32-MVP. It was a problem with the newer beta bios for me, try flashing to an older bios.:)

i tried one lower, i guess ill have to go to the one after stock. thanks for the read!