A+black panther

[madeee]

To view this case mod, go here (http://www.techpowerup.com/gallery/1600.html).

http://www.techpowerup.com/gallery/1600/_1.jpg (http://www.techpowerup.com/gallery/1600/1.jpg) http://www.techpowerup.com/gallery/1600/_2.jpg (http://www.techpowerup.com/gallery/1600/2.jpg) http://www.techpowerup.com/gallery/1600/_3.jpg (http://www.techpowerup.com/gallery/1600/3.jpg) http://www.techpowerup.com/gallery/1600/_4.jpg (http://www.techpowerup.com/gallery/1600/4.jpg) http://www.techpowerup.com/gallery/1600/_5.jpg (http://www.techpowerup.com/gallery/1600/5.jpg) http://www.techpowerup.com/gallery/1600/_6.jpg (http://www.techpowerup.com/gallery/1600/6.jpg) http://www.techpowerup.com/gallery/1600/_7.jpg (http://www.techpowerup.com/gallery/1600/7.jpg) http://www.techpowerup.com/gallery/1600/_8.jpg (http://www.techpowerup.com/gallery/1600/8.jpg) http://www.techpowerup.com/gallery/1600/_9.jpg (http://www.techpowerup.com/gallery/1600/9.jpg) http://www.techpowerup.com/gallery/1600/_10.jpg (http://www.techpowerup.com/gallery/1600/10.jpg) http://www.techpowerup.com/gallery/1600/_11.jpg (http://www.techpowerup.com/gallery/1600/11.jpg) http://www.techpowerup.com/gallery/1600/_12.jpg (http://www.techpowerup.com/gallery/1600/12.jpg) http://www.techpowerup.com/gallery/1600/_13.jpg (http://www.techpowerup.com/gallery/1600/13.jpg)

Specs:
» A+plus black pearl case » EVGA 680i mobo » Intel q6600 @ 3.2ghz » 4gb crucial balistix tracer 8500/1066 ram » Msi 8800 gts 640mb gddr3 oc sli » 2x samsung sata optical drives » 2x wd 74gb raid » 2x segate barracuda 500gb raid » coolmaster modular psu 1kw » water cooling » xspc 120 rad » xspc 240 rad » xspc drive bay res » tygon 1/2 tubing » Ek supreme block » laing d5 vario pump » idle temp 30c

Mods:
custom paint job inside,done bye myself..hole`s cut for cable managment..cable managment.. all cable`s sleeved..anti kink spring`s applied to water cooling tubbing..

This is an update of my pink panther..hope you all enjoy..love the case`s i`ve been seeing on here ..Picture`s taken with sony cyber shot..,Still haven`t finished with the water cooling..had a problem with, EVGA upgraded,so still wanting to change the mobo,and graphic`s card`s,when there changed i will water cool them..Also waiting for my green sata cables to turn up..hate them red one`s..lol.i also just went for the clean look really with this case..with a bit of colour

[aspire]

I gave you a ten to balance out the 1.

Realistically I would have given you either a 7 or 8.

I love the case, but I think you could have done better with the top mounted rad.

[steelkane]

Clean looking build, the water setup is also clean, also like the all black look, 8/10 ........ Have time check out my Rig http://www.techpowerup.com/gallery/1523.html Thanks.

[madeee]

thank you for your comments..the reason i put the rad there..as i said in my log i haven't quiet finished with the water cooling..i will prob put it inside.but this case already come with that rad mounting bit here

[madeee]

p.s if i fitted the rad inside the top of the case i wouldn`t get my other graphic`s card in..lol

[aspire]

What if you just mounted the rad itself on the inside, mounted the fans on the outside and only went one sided with the fans?

[madeee]

What if you just mounted the rad itself on the inside, mounted the fans on the outside and only went one sided with the fans?

yes tried that,but even with the two fan`s on the top inside as it is now the graphic`s card only just goes in..and the rad is thicker than the fan`s so it wont fit,really need to get a slimmer rad..i think...lol

[Salvadorian Stuff]

Looks really nice and clean, Good job!