OC Radeon 9600 pro

[thundercat]

Hi everybody.

I have power color Radeon 9600 Pro 128 mb!

I would like to OC the video card. What would be the recommended mhz(OC) of core and memory for this video card. i have run the max core freq. through the night and it showed me 467 mhz core with 45 minutes heat up with no errors.

Could u write the "normal" OC frequencies for this video car.

Thanks :)

[nightelf84]

No two cards are the same and thus the amount of OC you get will be different as well. There are no recommended OC, just go as high as possible without artifacts. I would recommend you run 'Find Max' for both the core and memory until you reach at least 1 hour error-free. There are always steps you can take to improve your OC such as better cooling and good clean power to your card. Your default core is 400mhz thats already a 67 mhz increase you've got there. Mine went up as high as 457 with stock cooling. As for mem, mine reached 317. Just a reference...if you can go higher, great. Not satisfied?, slap on a VGA silencer and some ram sinks, and up she goes...

[rlcrl]

i also have a sapphire 9600pro 128Mb
running atitool with stock heatsink: 482core 305mem

slapping a zalman with ramsink and fan: 510core 330mem but decided to set it at 490core 330mem

[C&C Freak 2K]

I got 465/345 artifactless with stock cooling. 468/348 with the Vantec Iceberq4. That's low compared to most others who I've sen here.

[wazzledoozle]

I have a powercolor 9550, I get 420 core (downclocked a bit) and 215x2 memory. I have a copper Iceberq and no ramsinks.