ATI Tool Blocks IE and MS Office!!

[Locutus_UT]

Man, I spent most of a weekend rerunning restore points on my machine trying to figure what why IE and MS Office products wouldn't start up. By happenstance, I noticed that they would work fine and took stock what was loaded. Sure enough, if I launched ATI Tool, IE and MS Word, for instance, would not load.

Why or how come this tool is preventing from them launching? This is a new computer and I have all latest virus scan software, spybot, adware, MS antispyware, etc. All ran and found nothing.

Thanks,

[W1zzard]

which atitool version do you use?

does turning off 3d detection help?

[zaibakker]

Hi,
It seems the fan control by GPU temp not working exactly for others.
I have this problem too.
It works one time but now when a load or apply the fan control by temperaure GPU (above 0°C 30%, aboce 40°C > 100%, etc...) doesn't work at all.
But the other control fan work for me. So il have create 2 profil for normal use at 30% and for game at 100%.

An other point, with asus smart doctor, i had the ram temperature too but it seems the environement temp in ati tool is not this temperature (alway stable to 50°C, very hot in comparaison the 32°C of my GPU in normal use)

My config: asus x800xl + ati silencer 5 rev 2

Good work for this tool better than smartdoctor for cpu, ram and stability for sure!

zaibakker

[Locutus_UT]

which atitool version do you use?

does turning off 3d detection help?

I'm using 0.24 and yes, turning off 3d detection helps...interesting. :confused:

What's going on there?

[zaibakker]

Tx a lot, i didn't see the tweak 3d detection.
So now, there is no problem at all for me.

2 profile and the game profile loaded when i play game automatically!
as it, i don't forget to change the fan speed as the last time!!

fabulous ! (with a little sound for the loaded profil is the cherry on cake!)

[pmoynaha]

I have the same IE, Outlook Express, and Windows Media Problem. So turning on the 3D detection is the reason, hmm. Is there a way to get around this, because I like this feature? Thanks.

[W1zzard]

try latest 0.25 beta

[Locutus_UT]

The problem with the Beta is the default fan setting is 10% instead of 19% in .24. If you're using Fan control to try to keep you VPU at a certain temp, it will raise it to that temp (70C in my case). I don't want my VPU to run that hot. That extra 9% keeps me in the 40's.

A request would be if you could use fan control to set at a certain idle temp. (say 45C) and load temp (say 70C).

Thanks!

[pmoynaha]

try latest 0.25 beta
Does it fix both the fan and MS Application problems?