Docnsane
01-15-2006, 09:40 PM
This is prob an error with the HDDTemp.dll.
The application cannot read HD temps if there are identical drives models installed. Specifcialy, I run a pair of Seagate ST3300831AS SATA drives. I cannot get temp readings from the 2nd drive installed. The first drive registered with a temperature.
The graph is also in error and it's showing an linearly growing ossilating reading that will reach a max value then drop out to zero, starting over the cycle.
I am on the AsRock939 Dual, using the ULi Sata ports.
The application cannot read HD temps if there are identical drives models installed. Specifcialy, I run a pair of Seagate ST3300831AS SATA drives. I cannot get temp readings from the 2nd drive installed. The first drive registered with a temperature.
The graph is also in error and it's showing an linearly growing ossilating reading that will reach a max value then drop out to zero, starting over the cycle.
I am on the AsRock939 Dual, using the ULi Sata ports.