X800 do I fix it or bin it

[_lumpy_]

Hi guys

Here’s the thing, About 6 months ago I replaced my X800XT PE due the fact it was developing artifacts. Since then it has sat in my draw waiting for me to get of my arse and sort it.

The stocks on this card are:-

CORE - 520
MEMORY - 560

When using ATItools I can pull back the Memory to 550 and the card runs like a wet dream, all well and good.

So this is my question. Is there any software that I can use, or is there a clever guy out there who can right me a bios update to permanently flash the memory at a lower speed.

If you know how this can be done please PM me as well as giving me a little bump.

Cheers

[giorgos th.]

i think you can use Rabit to modify your bios and then with a flashing prog to work it.

[trog100]

u could flash it with a gto bios i think.. 400/490-ish.. then use atitool to just clock it up when in 3D mode..

trog

[_lumpy_]

i think you can use Rabit to modify your bios and then with a flashing prog to work it.


Sorry I 've never used that program, wouldn't even know where to get it. Have you a link

[_lumpy_]

Found Rabit, thanks, and not a bad idea about the gto

[wizard23]

you dont have to do enything just clean it and put some fresh thermal paste on !!

[_lumpy_]

na the thing is fubar. I have had it running on overdrive for too long. just weak ram on it thats all. I have an artic cooler on it and tried with the original. still the same results.

[Urlyin]

Flash it with an XT BIOS ...

[xdaxxchampxx]

why not just have ati tool start at startup and load a profile with the clock lower that why each time u boot it will be lowered automatically :toast: