Fashing 2nd card on flashrom v2.40.

[Alien666]

How can I flash the BIOS on the 2nd video card on my computer.The cards are not in CrossFire/SLI.I want to flash teh 2nd card,but I don't know wnat command I must write.Maybe '-f -p 1' instead of '-f -p 0' or...?Thank you!

[Dynamic]

First off put up a sig including your system components so we'll know what you're talking about. Why don't you flash each card alone in the same PCI-E slot? What are you running x1900's in CF or GT/GTX in SLI?

[Alien666]

First off put up a sig including your system components so we'll know what you're talking about. Why don't you flash each card alone in the same PCI-E slot? What are you running x1900's in CF or GT/GTX in SLI?
First off I wrote that the cards aren't in CrossFire or SLI!The cards are SAPPHIRE X850XTPE and SAPPHIRE X800GTO2.I must flash the cards while they both running,because I flashed the X800GTO2 with wrong BIOS so it can't run on it's own.My Motherboard has 2 PIC-E Slots so I must try flash the BIOS of GTO2 while I'm running XTPE as first card.I'm just asking for the command.THANK YOU!

[dolf]

Obviously you have adjusted for first boot device the PCI VGA. That's why it is now device 0. If you want to flash the other one (device 1) use the following command line: flashrom -f -p 1 biosname.bin

Good luck

[Alien666]

Obviously you have adjusted for first boot device the PCI VGA. That's why it is now device 0. If you want to flash the other one (device 1) use the following command line: flashrom -f -p 1 biosname.bin

Good luckThank YOU.I though that is the command,but I wasn't so sure.Thank you again!