Your PC ATM

(FIH) The Don · Jan 6, 2010

with the new baby's

BraveSoul · Jan 6, 2010

PP Mguire said:
Double post. Added my new toy in the pic and cleaned a bit.
http://img156.imageshack.us/img156/5039/dscn1120b.jpg
http://img403.imageshack.us/img403/1791/dscn1119.jpg

looks good, and u got some museum hardware
any difficulties reversing the harddrives? i know i had with the wires going against fans

MRCL · Jan 7, 2010

Finally some progress with the i7 rig.

Holy crap bad lighting

I'm gonna sleeve every cable

The I/O ports are fully sleeved already

And all eight fans...

KieX · Jan 7, 2010

MRCL said:
Finally some progress with the i7 rig.

Holy crap bad lighting
http://img.techpowerup.org/100107/Foto0485.jpg

I'm gonna sleeve every cable
http://img.techpowerup.org/100107/Foto0486.jpg

The I/O ports are fully sleeved already
http://img.techpowerup.org/100107/Foto0487.jpg

And all eight fans...
http://img.techpowerup.org/100107/Foto0488.jpg

Your build is wetting my appetite for the finished product. Really like that black and white color contrast.

MRCL · Jan 7, 2010

Sleeving madness... this takes up so much time omg. but the looks are worth it! Now I've finished the Lian Li fan controller

I'm no master so please be gentle

(FIH) The Don · Jan 7, 2010

looks great, maybe some shorter heat shrinks and some more heat?

but that is up to you, i'm no master either

will be buying that case next monthe, think it looks freakin great, and i need a case, tired of my stuf laying on the table

MRCL · Jan 7, 2010

Yeah it didn't turn out too well in some spots, but eh. And the sleeve is quite thick, the shrink really is very tight.

(FIH) The Don · Jan 7, 2010

but then, who the hell i looking behind your fancontroller anyways :roll:

MRCL · Jan 7, 2010

(FIH) The Don said:
but then, who the hell i looking behind your fancontroller anyways

Thats why I was a little sloppy there

Most of the stuff is in the comp now, and I did the water loop layout real quick... for now its just gonna be the CPU being watercooled. I'll work the GPU in later, if its even necessary.

Excuse the blurryness, terrible lighting in my room in the night and my camera can't keep up with that.

MoonPig · Jan 8, 2010

I love everything but the tubing layout... Just looks odd. Needs more in the loop. Is the GPU going to be cooled?

MRCL · Jan 8, 2010

MoonPig said:
I love everything but the tubing layout... Just looks odd. Needs more in the loop. Is the GPU going to be cooled?

It has been changed already :laugh:

The odd twist above the pump was eliminated.
Not yet no. I might watercool it later. There is room for the pump and a EK res easily, but the dual rad for that has to be mounted at the back. I don't like that too much but there's simply no room inside.

PP Mguire · Jan 8, 2010

BraveSoul said:
looks good, and u got some museum hardware
any difficulties reversing the harddrives? i know i had with the wires going against fans

I had no problems, but then again i also made my own hole on the reverse side of the drive cage for cables and more wire management. I got some museum hardware in the i5 rig cause i recently found out my DFI LP nF3 Ultra AGP 939 died on me for some reason :confused:

Chicken Patty · Jan 8, 2010

Looking very nice MRCL, lovely sleeving. Shorter heatshrinks by that molex and you would be set :toast:

Chicken Patty · Jan 8, 2010

Hey Cory, would you mind taking some shots of the back of the case to show how you routed the HDD cables and stuff. That'll be great if you can do that

MKmods · Jan 8, 2010

I rebuilt my Lego comp to take to Calif during Xmas as a mini tower. To me its my fav comp now..
(I use it 24/7 and it draws 30watts at the wall even with the Raptor and dual 80mm fans)

p_o_s_pc · Jan 8, 2010

that thing is so cool. what hardware and how much to build me a case like that MATX size(no optical drive slot needed)

KieX · Jan 8, 2010

MKmods said:
I rebuilt my Lego comp to take to Calif during Xmas as a mini tower. To me its my fav comp now..
(I use it 24/7 and it draws 30watts at the wall even with the Raptor and dual 80mm fans)
http://i370.photobucket.com/albums/oo142/Partspicts/P1030894.jpg

That is brilliant! I can't believe I've never put my buckets of lego to such good use. Just had to go and vote a 10/10 for it.

MKmods · Jan 8, 2010

p_o_s_pc said:
that thing is so cool. what hardware and how much to build me a case like that MATX size(no optical drive slot needed)

LOL, the Legos cost $$$$.. Lucky for me my Little Bro is a Lego NUTT! and gave me a few boxes for Xmas a few years ago...

The cool part is they are replaceable, so if you drill a hole in one and dont like it just remove it and replace it with another block.

p_o_s, scrounge up some blocks its really easy to make one...

I think I will take it apart and do a buildup in the Mod Log section this weekend...

KieX said:
That is brilliant! I can't believe I've never put my buckets of lego to such good use. Just had to go and vote a 10/10 for it.

LOL, the first one I did was here like 3 or4 years ago(it had wheels).. People showed me sites from all over that were showing it, the funniest one was one in Russia.

The hardware was a Via Epia PD (1Ghz cpu) This one uses an Intel Atom 330 (dual core 1.6ghz). I really wish I had waited and made an AMD one with a 5750 in the PCI X slot, now THAT would kick ass...

Cold Storm · Jan 8, 2010

God, I love your Lego builds mK!!!

Well, I got it all in.. Even my little "special" Cooler! :rockout:

My favorite picture of the night!

And, to show off my new screen. :rockout:

I'll have some more of the case it self come this weekend. Due to it being 11pm when I was done, the final was rushed to make sure it was working. Now, I can go asleep happy as a beaver eating wood.

The best part of all this.. $200 for a case and cooler that I can't even hear with the fans at "high". But, temps are a few degrees warmer then my 2 scythe's push/pull effect and it being out in the open..

I'm very impressed with the Raven Rv02 over the Rv01. Hell, I'm even impressed with Noc cooler! Or it might be the fact I'm greatful for the fact that good old Sneeky allowed me to get this all from him! :respect:

Plus gotta thank RM for coming over and helping! I wouldn't of finished it alone tonight. Or, was it Thoughtdisorder's Home Made Mac & Cheese that gave me the fight to finish? :rolleyes:

PP Mguire · Jan 8, 2010

I love Noctua but the circle fan has to go =/

Here ya go CP.

Chicken Patty · Jan 8, 2010

Thanks Cory. I might do that tonight to mine and see how it comes out :toast:

PP Mguire · Jan 8, 2010

Its not by all means that neat as by looking at the pic i could see i can do more to tidy it up. But i figured wth why should i? Nobody sees the back. I just popped the panel off, took a snap, and put it back together :laugh:

Chicken Patty · Jan 8, 2010

PP Mguire said:
Its not by all means that neat as by looking at the pic i could see i can do more to tidy it up. But i figured wth why should i? Nobody sees the back. I just popped the panel off, took a snap, and put it back together

I just swapped coolers on my rig and flipped my HDD around. I copied your idea before you put a patent on it :laugh:

Funny I had thought about it before but was unsure of clearance. Then I saw you do it, so I had to try it

PP Mguire · Jan 8, 2010

Well ive always had my drives relatively hidden. Cant do it in this one though. I usually have my drives vertical and cabling is easier but the fins to hold up 5.25 drives are in the way of the holes to screw my drives in :shadedshu

So i went to my old standard, backwards drives for hidden cables.

Chicken Patty · Jan 8, 2010

PP Mguire said:
Well ive always had my drives relatively hidden. Cant do it in this one though. I usually have my drives vertical and cabling is easier but the fins to hold up 5.25 drives are in the way of the holes to screw my drives in :shadedshu

So i went to my old standard, backwards drives for hidden cables.

My first shot was mounting it vertical also, but there is something in the way of the cage across the middle so that won't work for me.

System Name	Ivy Biatch
Processor	i5 3570K
Motherboard	ASSRockzz z77TOTHEEXTREME!!!!
Cooling	bleh
Memory	2x4gb crucial 1866
Video Card(s)	HD7770, yes it does BF3
Storage	120gb Vertex
Display(s)	226BW
Case	whats that, oh my table
Audio Device(s)	stock onboard thing
Power Supply	HX850W
Software	7

System Name	Filtration tower
Processor	i9 7900@4.4ghz
Motherboard	ASRock X299 Taichi
Cooling	Air
Memory	64g 3200 quad channel
Video Card(s)	ASUS GTX 1080Ti
Storage	500gb Nvme, 200gb SSD, 1700gb HDD
Display(s)	34" Acer Predator 3440x1440
Case	Thermaltake v71
Power Supply	EVGA supernova 850 T2

System Name	Fractality 1.0
Processor	Intel Core i7-860 @ 3.6GHz
Motherboard	EVGA P55 SLI
Cooling	Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory	16GB Kingston Hyper RAM
Video Card(s)	PNY GeForce 580 XLR8
Storage	64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s)	24" Acer V243W
Case	Fractal Design Define R2, sleeved all I/O cables
Audio Device(s)	onboard
Power Supply	Corsair HX750W modular, sadly only stock sleeving
Software	Win 7 64bit

System Name	Slick
Processor	Intel i5 2467M
Motherboard	Samsung Series 5 Ultrabook
Memory	8GB Corsair Value
Storage	Crucial M4 7mm 256GB
Display(s)	13"
Software	Windows 8 Pro x64

System Name	Fractality 1.0
Processor	Intel Core i7-860 @ 3.6GHz
Motherboard	EVGA P55 SLI
Cooling	Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory	16GB Kingston Hyper RAM
Video Card(s)	PNY GeForce 580 XLR8
Storage	64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s)	24" Acer V243W
Case	Fractal Design Define R2, sleeved all I/O cables
Audio Device(s)	onboard
Power Supply	Corsair HX750W modular, sadly only stock sleeving
Software	Win 7 64bit

Your PC ATM

(FIH) The Don

BraveSoul

MRCL

KieX

MRCL

(FIH) The Don

MRCL

(FIH) The Don

MRCL

MoonPig

MRCL

PP Mguire

Chicken Patty

Chicken Patty

MKmods

Case Mod Guru

p_o_s_pc

F@H&WCG addict

KieX

MKmods

Case Mod Guru

Cold Storm

Battosai

PP Mguire

Chicken Patty

PP Mguire

Chicken Patty

PP Mguire

Chicken Patty

System Name	Univac SLI Edition
Processor	Intel Xeon 1650 V3 @ 4.2GHz
Motherboard	eVGA X99 FTW K
Cooling	EK Supremacy EVO, Swiftech MCP50x, Alphacool NeXXos UT60 360, Black Ice GTX 360
Memory	2x16GB Corsair Vengeance LPX 3000MHz
Video Card(s)	Nvidia Titan X Tri-SLI w/ EK Blocks
Storage	HyperX Predator 240GB PCI-E, Samsung 850 Pro 512GB
Display(s)	Dell UltraSharp 34" Ultra-Wide (U3415W) / (Samsung 48" Curved 4k)
Case	Phanteks Enthoo Pro M Acrylic Edition
Audio Device(s)	Sound Blaster Z
Power Supply	Thermaltake 1350watt Toughpower Modular
Mouse	Logitech G502
Keyboard	CODE 10 keyless MX Clears
Software	Windows 10 Pro

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh WQHD Computer Monitor
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	Crossflow III
Processor	AMD 965 (4.04Ghz)
Motherboard	Asus Crosshair III
Cooling	Air
Memory	4 gigs Mushkin 7-7-7-20@1T
Video Card(s)	single 9800GT
Storage	Raptor 150's in Raid0
Display(s)	LG Flatron 24"
Case	Custom
Audio Device(s)	AuzenTech X-Raider W/OP637
Power Supply	Custom modded Corsair 750HX
Software	Win 7 64/Solaris Utility
Benchmark Scores	3DMark06--21963 so far

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55