Super Pi 1m scores

giorgos th. · Oct 11, 2007

where is coretemp?
instead of TaT use coretemp 0.95.4 and in orthos use small fft test @ priority 8-10 to check your cpu temps.

trt740 · Oct 11, 2007

trt740 said:
example

Well this is way off on this board. I think tat is correct since it's made by intel for their chips.

giorgos th. · Oct 11, 2007

only coretemp is giving the correct temps for G0 cpus..no other program support them..

trt740 · Oct 11, 2007

giorgos th. said:
only coretemp is giving the correct temps for G0 cpus..no other program support them..

I don't believe it every time I have ever used core temps it reads different than tat no matter what intel chip I used. It also reads different than several motherboard programs. I don't believe core temps is correct because on my B3 stepping quad it was way off aswell and with my e6600. however it wouldn't matter because 62c is not dangerous to the cores more like 75c and you would error at that temp anyway.

giorgos th. · Oct 11, 2007

you can find more HERE if you dont believe me,but this is the truth..
i have 52C load @ orthos at 3800 @ 1.42Vcore with 3ple rad water cooling and 24C room temp,so you see that having 45C load at 4000 @ 1.5Vcore with air is strange...

trt740 · Oct 11, 2007

Hey I could be wrong, however, I don't think a third party company can design a program better than intel for it's own chip.

trt740 · Oct 11, 2007

trt740 said:
I don't believe it every time I have ever used core temps it reads different than tat no matter what intel chip I used. It also reads different than several motherboard programs. I don't believe core temps is correct because on my B3 stepping quad it was way off aswell and with my e6600. however it wouldn't matter because 62c is not dangerous to the cores more like 75c and you would error at that temp anyway.

It still wouldn't matter.

pt · Oct 11, 2007

trt740 said:
Hey I could be wrong, however, I don't think a third party company can design a program better than intel for it's own chip.

i can

and you should really give a try

trt740 · Oct 11, 2007

pt said:
i can
and you should really give a try

I have been wrong before.

Tatty_Two · Oct 12, 2007

giorgos th. said:
Tatty and trt,what room temps have you got?

About 65F which is about what......18C

Tatty_Two · Oct 12, 2007

giorgos th. said:
and with what program are you watching cpu temps?

The latest Asus probe and speedfan, i will post screenie tomorrow as its muidnight here and at my age I need my beauty sleep! Also will have to download the latest CPU-Z so you can match volts in Asusprobe and CPU-Z.

trt740 · Oct 12, 2007

you rock thx bro

Tatty_Two · Oct 12, 2007

trt740 said:
you rock thx bro

Lolz! I will also download the latest coretemp so you can match right across the board so to speak.

trt740 · Oct 12, 2007

giorgos th. said:
you can find more HERE if you dont believe me,but this is the truth..
i have 52C load @ orthos at 3800 @ 1.42Vcore with 3ple rad water cooling and 24C room temp,so you see that having 45C load at 4000 @ 1.5Vcore with air is strange...

My side of my case is off. I'm using a dual 120 fan 55cf/70cf, scythe Infinity heatsink set up thats blowing directly into a third 120mm fan 55cf, with a antec spot cooler over my ram, a 120 mm intake fan 55cf on the front of the case, ( which is solid aluminum) and a Thremalright H0-3R/600 mounted on my video card with a 90 mm AC case fan 35cf. This is what core temps reads using orthos prime for a very short time and my voltage is very low. I find this very shady at best.

Tatty_Two · Oct 12, 2007

Why you running with a 7x multi?

trt740 · Oct 12, 2007

just to lower the voltage and open up the fsb to make my point those temps cannot be right. i'm testing my FSB I think it will do 550

Wile E · Oct 12, 2007

Those temps from core temp are about right for those voltages, trt. TAT is definitely reading low.

giorgos th. · Oct 12, 2007

also,guys use small fft test to see max cpu temp not blend test..

Wile E · Oct 12, 2007

giorgos th. said:
also,guys use small fft test to see max cpu temp not blend test..

If you want to push temps, use a little program called burnmax. Run burnmax, then runOrthos on blend, and you'll see crazy high temps, and still have error checking.

giorgos th. · Oct 12, 2007

orthos @ priority 8-10 does an excellent job in stressing both cores...it`s more than enough..
stressing is good but if you overdo it,you might hang your cpu (like i`ve seen with TAT)..

Wile E · Oct 12, 2007

giorgos th. said:
orthos @ priority 8-10 does an excellent job in stressing both cores...it`s more than enough..
stressing is good but if you overdo it,you might hang your cpu (like i`ve seen with TAT)..

If it hangs, it's not 100% stable. When I push that hard, and get a hang-up, I usually either have to loosen a timing, raise a voltage, or lower a clock. After I do that, no more hangs.

There's no such thing as pushing too hard

giorgos th. · Oct 12, 2007

ok...it`s your opinion and i respect it..

giorgos th. · Oct 12, 2007

with room temp 24C-25C.
load 51C @ 3807mhz - 1.44Vcore from coretemp..

idle 32C @ 3807mhz - 1.448Vcore from coretemp...

as you can understand with 24C room temp it`s impossible to have 18C idle with watercooling..

pt · Oct 12, 2007

seems correct for you giorgos th.
but for me on idle with a room temp of 25ºc or less in idle i get 45ºc in coretemp with custom made watercooling

Tatty_Two · Oct 12, 2007

trt740 said:
I don't believe it every time I have ever used core temps it reads different than tat no matter what intel chip I used. It also reads different than several motherboard programs. I don't believe core temps is correct because on my B3 stepping quad it was way off aswell and with my e6600. however it wouldn't matter because 62c is not dangerous to the cores more like 75c and you would error at that temp anyway.

That is probably because both the Q6600 and the E6600 are both "B" stepping chips, as he says, coretemps is the only real accurate way of measuring ATM.....so when I run mine for you tonight it will probably show that my temps are higher than I thought....we will see :ohwell:

Processor	C2D E7600
Motherboard	GA EG41M ES2L
Memory	2GB ADATA 800MHZ
Video Card(s)	ASUS HD4350
Storage	OCZ VERTEX TURBO 32GB + 2 MORE..
Display(s)	SM226BW
Audio Device(s)	7.1 HD / X-540
Software	7X86 ULT

System Name	Apple Bite
Processor	Intel I5
Motherboard	Apple
Memory	40gb of DDR 4 2700
Video Card(s)	ATI Radeon 500
Storage	Fusion Drive 1 TB
Display(s)	27 Inch IMac late 2017

Processor	C2D E7600
Motherboard	GA EG41M ES2L
Memory	2GB ADATA 800MHZ
Video Card(s)	ASUS HD4350
Storage	OCZ VERTEX TURBO 32GB + 2 MORE..
Display(s)	SM226BW
Audio Device(s)	7.1 HD / X-540
Software	7X86 ULT

System Name	Apple Bite
Processor	Intel I5
Motherboard	Apple
Memory	40gb of DDR 4 2700
Video Card(s)	ATI Radeon 500
Storage	Fusion Drive 1 TB
Display(s)	27 Inch IMac late 2017

Processor	C2D E7600
Motherboard	GA EG41M ES2L
Memory	2GB ADATA 800MHZ
Video Card(s)	ASUS HD4350
Storage	OCZ VERTEX TURBO 32GB + 2 MORE..
Display(s)	SM226BW
Audio Device(s)	7.1 HD / X-540
Software	7X86 ULT

Super Pi 1m scores

giorgos th.

trt740

giorgos th.

trt740

giorgos th.

trt740

trt740

pt

not a suicide-bomber

trt740

Tatty_Two

Gone Fishing

Tatty_Two

Gone Fishing

trt740

Tatty_Two

Gone Fishing

trt740

Tatty_Two

Gone Fishing

trt740

Wile E

Power User

giorgos th.

Wile E

Power User

giorgos th.

Wile E

Power User

giorgos th.

giorgos th.

pt

not a suicide-bomber

Tatty_Two

Gone Fishing

Processor	AMD Turion 64 X2 Mobile TL-60 (Trinidad)
Motherboard	ASUS F3Ka (ATI RS690M)
Cooling	stock
Memory	Nanya 2x1GB ddr2 667@5-5-5-15-2T
Video Card(s)	ATI Mobility Radeon HD2600 512MB DDR2@ 580mhz/486mhz
Storage	160GB on laptop+250GB external
Display(s)	ASUS 15.4
Case	Asus Laptop F3Ka chassis
Audio Device(s)	on-board
Power Supply	1:30minutes battery
Software	"genui xp", 'cause i hated vista

Processor	Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard	MSI MAG Z490 TOMAHAWK
Cooling	Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory	32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s)	Asus Dual RTX 4070 OC
Storage	WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s)	AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case	Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s)	Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply	Seasonic CORE GM650w Gold Semi modular
Mouse	Coolermaster Storm Octane wired
Keyboard	Element Gaming Carbon Mk2 Tournament Mech
Software	Win 10 Home x64

System Name	The ClusterF**k
Processor	980X @ 4Ghz
Motherboard	Gigabyte GA-EX58-UD5 BIOS F12
Cooling	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s)	Evga GTX 580
Storage	Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s)	HP LP2475w 24" 1920x1200 IPS
Case	Technofront Bench Station
Audio Device(s)	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software	Win7 Ultimate N x64, OSX 10.8.4