Get your X1950Pro modded BIOS here

Amigoo · Oct 23, 2007

Ketxxx said:
done.

Thanks alot man, but I have feeling that voltages didnt rise up for my card. with this bios i could get 641mhz of GPU and same speed of vram as with stock bios.changing memory timings gave some noticable fps,thats very good. But I would like to try changing bios voltages by myself,but dono what software to use. rabit v2.2 dont have this feature

Ketxxx · Oct 23, 2007

If a voltage table is present I will increase voltage, but theres no way of knowing if it will work on all cards, in which case hardmodding is the only alternative.

Ketxxx · Oct 27, 2007

If anyone wants this thread stickied, go bug a mod. I keep forgetting about requests and what ppl want done where the thread vanishes to page 2 or whatever. Out of sight out of mind.

truehighroller1 · Oct 27, 2007

I have a THERMALRIGHT|HR-03 Rev A and I bought some bfgtech ram sinks and stuck the right sized ones on the voltage things by the red heatsink and these are my temp now. My GPU temp is 34c and the temp of the temp chips is 31c. I was hitting 45c before at idle and the temp chip was 52c. I had a v900 zalman on it before. My temps at load don't change very much on the temp chip and the most I reach no matter what my clock is 56c, 52c when just playing ut3 and 3d games alike. I was tweaking this thing out as much as possible and noticed that after 855 on the memory clock with stock voltage by the way, I can up the voltage and it does not help me get a higher clock on the memory or the core the most I can reach on the core is 742.5 and like I said my temps don't budge now. I need a bios with all my 3d clock memory timings tweaked. How do I get to where I can see my 3d clock memory timings? I figured I would give that info because it seems at a certain point voltages don't matter for me any more. Mind you I have my voltage flashed to be 1.5 for the gpu during 3d clocks everything else stock with the clocks being 702/837.

Deleted member 24505 · Oct 27, 2007

I have twiddled with my 1950's bios,and upped the core from stock 575 to 648,and mem from 688 to 776.I have also adjusted the mem timings a tad,can you have a look ketxxx and make sure its ok.I have benched my card at 654core and 803mem,it was fine,but i've flashed them a bit lower to be safe.The vgpu is raised from 1.3 to 1.375.

The mem will not run 3dm06 higher than 803mhz and core dont seem to like higher than 654 even with vgpu at 1.375,so maybe these are max clocks.

Quake · Oct 29, 2007

Is 1.4v max for bios modding?Can it go any higher

Andrey12341 · Nov 2, 2007

Is there any PALIT X1950PRO 512MB AGP BIOS?

Ketxxx · Nov 2, 2007

Palit\Xpertvision BIOS' suck hard. I ended up flashing my Xpertvision with a heavily modified BIOS of unknown origins to get my card working properly.

Andrey12341 · Nov 2, 2007

So Ketx,How can i flash my PALIT X1950GT AGP to X1950PRO or add some vcore to get higher clocks?
Is it possible to burn shappire's bios or any other bios on palit's card?
http://www.techpowerup.com/vgabios/...urer=&model=X1950+Pro&interface=AGP&memSize=0
will ati's bios will be good enoth?

Yrr · Nov 3, 2007

Ketxxx said:
Palit\Xpertvision BIOS' suck hard. I ended up flashing my Xpertvision with a heavily modified BIOS of unknown origins to get my card working properly.

Could you post this Bios, please? I , too, have problems with my palit(running flawlessly only on 110MHz PCie)

tkpenalty · Nov 3, 2007

Andrey12341 said:
So Ketx,How can i flash my PALIT X1950GT AGP to X1950PRO or add some vcore to get higher clocks?
Is it possible to burn shappire's bios or any other bios on palit's card?
http://www.techpowerup.com/vgabios/...urer=&model=X1950+Pro&interface=AGP&memSize=0
will ati's bios will be good enoth?

Depends... I have no idea about AGP. I'd just overclock it from there, though I would really replace the cooling solution that you are using right now before you do anything... say a VF700CU maybe?

Andrey12341 · Nov 3, 2007

^^^
Temps are below 60 at pro clocks,i just want to be sure that i can burn ASUS's x1950pro bios on palit's card.

LuxZg · Nov 4, 2007

Hey Ketxx

I was wondering, do you put same mem settings to all cards or do you check each cards memory somewhere or something like that?

If it's "generic" numbers, could you post them here? If not, could you check my BIOS?
Original BIOS of my card is here: http://forums.techpowerup.com/showpost.php?p=454880&postcount=1587
No need to modify anything but the memory timings, I'll take care of the rest

I got interested after reading these few posts from last 2 weeks where ppl got 10+ fps increase with AA

I mean, it's not going from 100 to 110, but 30 to 40! Now that's 30+% increase!!

I'd love to see that on my card

Btw, I've put a better paste, but still didn't get time to lap it a bit.. And I think I'll skip changing cooler altogether, after I saw what new nVidia baby can do

I'm just waiting for ATi's answer first

But I still need this card tweaked if possible.. I'm still going to game on this one till Xmas at least

Ketxxx · Nov 7, 2007

Heres a screen of the edited memory timings. As far as I'm aware these timings should work on any BGA memory, weather its Samsung, Hynix, Quimonda, etc. There should never be any doubt with a 1950Pro anymore

Kinda shocked ppl didnt think another 10FPS with AA was possible.

Ketxxx · Nov 7, 2007

Andrey12341 said:
^^^
Temps are below 60 at pro clocks,i just want to be sure that i can burn ASUS's x1950pro bios on palit's card.

Always stay with the BIOS on your card if you can. If the clocks are good with the BIOS you have now, just use rabit to edit core and memory clocks. While your at it you might want to also change fan speeds so your card stays cooler.

Ketxxx · Nov 7, 2007

Yrr said:
Could you post this Bios, please? I , too, have problems with my palit(running flawlessly only on 110MHz PCie)

Note: My card is PCIE, NOT AGP! You MUST flash t this BIOS using atiflash from a bootable disk, NOT atiwinflash!

DaMulta · Nov 7, 2007

Ket can you mod my bios 900Mhz full voltag(3d settings of course)e on a HD2900XT 1GB GDDR4 card?

Ketxxx · Nov 7, 2007

I havent looked at any HD series yet, its on my todo list, but I dont know when I will get time.

DaMulta · Nov 7, 2007

Make time LOL

Your doing this in the code right?

Ketxxx · Nov 7, 2007

DaMulta · Nov 7, 2007

What are you using to do this?

Ketxxx · Nov 7, 2007

Xvi32 for 1950s, dunno if it will work the same for HD cards, should do tho.

DaMulta · Nov 7, 2007

http://bios.techpowerup.com/vgabios/954/ATI.2900XT.1024.070425.html

Could you try it real quick>?

Ketxxx · Nov 7, 2007

Its on the same list as PTs 2600XT BIOS.

LuxZg · Nov 7, 2007

Ketxxx said:
Heres a screen of the edited memory timings. As far as I'm aware these timings should work on any BGA memory, weather its Samsung, Hynix, Quimonda, etc. There should never be any doubt with a 1950Pro anymore Kinda shocked ppl didnt think another 10FPS with AA was possible.

Well, sure you've shocked me

Wouldn't you be shocked if someone came up to you and said "hey, change these 3 numbers and your car will go30-40% faster"

Thanks for the pic! I'll try to play a bit during weekend

System Name	Ravens Talon
Processor	AMD R7 3700X @ 4.4GHz 1.3v
Motherboard	MSI X570 Tomahawk
Cooling	Modded 240mm Coolermaster Liquidmaster
Memory	2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s)	Powercolor 6800XT Red Devil
Storage	250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s)	27" BenQ Mobiuz
Case	NZXT Phantom 530
Audio Device(s)	Asus Xonar DX 7.1 PCI-E
Power Supply	1000w Supernova
Software	Windows 10 x64
Benchmark Scores	Fast. I don't need epeen.

System Name	Ravens Talon
Processor	AMD R7 3700X @ 4.4GHz 1.3v
Motherboard	MSI X570 Tomahawk
Cooling	Modded 240mm Coolermaster Liquidmaster
Memory	2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s)	Powercolor 6800XT Red Devil
Storage	250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s)	27" BenQ Mobiuz
Case	NZXT Phantom 530
Audio Device(s)	Asus Xonar DX 7.1 PCI-E
Power Supply	1000w Supernova
Software	Windows 10 x64
Benchmark Scores	Fast. I don't need epeen.

System Name	Ravens Talon
Processor	AMD R7 3700X @ 4.4GHz 1.3v
Motherboard	MSI X570 Tomahawk
Cooling	Modded 240mm Coolermaster Liquidmaster
Memory	2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s)	Powercolor 6800XT Red Devil
Storage	250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s)	27" BenQ Mobiuz
Case	NZXT Phantom 530
Audio Device(s)	Asus Xonar DX 7.1 PCI-E
Power Supply	1000w Supernova
Software	Windows 10 x64
Benchmark Scores	Fast. I don't need epeen.

Processor	Athlon 64 X2 4000+ (Brisbane Core)
Cooling	Arctic Cooling Freezer 64
Memory	4 x 1GB MDT DDR2 667
Video Card(s)	Xpertvision Radeon 1950GT
Storage	160GB HD
Display(s)	HannsG HU196D
Audio Device(s)	Onboard Realtek HD Audio
Power Supply	Coba 350W
Software	Vista Home Basic 64bit, Ubuntu Hardy Heron 8.04 LTS

System Name	My main PC - C2D
Processor	Intel Core 2 Duo E4400 @ 320x10 (3200MHz) w/ Scythe Ninja rev.B + 120mm fan
Motherboard	Gigabyte GA-P35-DS3R (Intel P35 + ICH9R chipset, socket 775)
Cooling	Scythe Ninja rev.B + 120mm fan \| 250mm case fan on side \| 120mm PSU fan
Memory	4x 1GB Kingmax MARS DDR2 800 CL5
Video Card(s)	Sapphire ATi Radeon HD4890
Storage	Seagate Barracuda 7200.11 250GB SATAII, 16MB cache, 7200 rpm
Display(s)	Samsung SyncMaster 757DFX, 17“ CRT, max: 1920x1440 @64Hz
Case	Aplus CS-188AF case with 250mm side fan
Audio Device(s)	Realtek ALC889A onboard 7.1, with Logitech X-540 5.1 speakers
Power Supply	Chieftec 450W (GPS450AA-101A) /w 120mm fan
Software	Windows XP Professional SP3 32bit / Windows 7 Beta1 64bit (dual boot)
Benchmark Scores	none

System Name	Work in progress
Processor	AMD 955---4Ghz
Motherboard	MSi GD70
Cooling	OcZ Phase/water
Memory	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s)	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage	SSD 64GB
Display(s)	Envision 24'' 1920x1200
Case	Using the desk ATM
Audio Device(s)	Sucky onboard for now :(
Power Supply	1000W TruePower Quattro

Get your X1950Pro modded BIOS here

Amigoo

Guest

Heedless Psychic

Heedless Psychic

Deleted member 24505

Guest

Attachments

Andrey12341

Guest

Heedless Psychic

Andrey12341

Guest

New Member

Andrey12341

Guest

Heedless Psychic

Attachments

Heedless Psychic

Heedless Psychic

Attachments

My stars went supernova

Heedless Psychic

My stars went supernova

Heedless Psychic

My stars went supernova

Heedless Psychic

My stars went supernova

Heedless Psychic