• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AMD Indexed Overclock Speeds

PVTCaboose1337

Graphical Hacker
Joined
Feb 1, 2006
Messages
9,501 (1.43/day)
Location
Texas
System Name Whim
Processor Intel Core i5 2500k @ 4.4ghz
Motherboard Asus P8Z77-V LX
Cooling Cooler Master Hyper 212+
Memory 2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card(s) Gigabyte GTX 670 2gb
Storage Samsung 840 Pro 256gb, WD 2TB Black
Display(s) Shimian QH270 (1440p), Asus VE228 (1080p)
Case Cooler Master 430 Elite
Audio Device(s) Onboard > PA2V2 Amp > Senn 595's
Power Supply Corsair 750w
Software Windows 8.1 (Tweaked)
My highest stable OC is in my siggy... Specs are on the side in system specs.

http://valid.x86-secret.com/show_oc?id=200722

 
Joined
May 12, 2006
Messages
11,119 (1.70/day)
System Name Apple Bite
Processor Intel I5
Motherboard Apple
Memory 40gb of DDR 4 2700
Video Card(s) ATI Radeon 500
Storage Fusion Drive 1 TB
Display(s) 27 Inch IMac late 2017
this is my first try on this brand new rig, haven't fully tested it but it seems stable so far.

6400+ B.E., stock volt.
HTT -1140mhz
Multiplier - 15
Crucial Ballistix ddr2-1066 @ ddr2-856 4-5-4-15
FSB - 228mhz
MSI K9A2 Platinum (790fx)
Zalman cnps9700 (24C idle)


very good but it will go higher
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
this is my first try on this brand new rig, haven't fully tested it but it seems stable so far.

6400+ B.E., stock volt.
HTT -1140mhz
Multiplier - 15
Crucial Ballistix ddr2-1066 @ ddr2-856 4-5-4-15
FSB - 228mhz
MSI K9A2 Platinum (790fx)
Zalman cnps9700 (24C idle)

I agree with trt. Throw 1.5v at it, and see how far it will go.
 
Joined
May 12, 2006
Messages
11,119 (1.70/day)
System Name Apple Bite
Processor Intel I5
Motherboard Apple
Memory 40gb of DDR 4 2700
Video Card(s) ATI Radeon 500
Storage Fusion Drive 1 TB
Display(s) 27 Inch IMac late 2017
Joined
Nov 22, 2007
Messages
1,398 (0.23/day)
Location
Hyderabad,India
System Name MSI apache ge62 2qd
Processor intel i7 5700HQ
Memory 12 Gb
Video Card(s) GTX960m
Storage 1TB
Display(s) Dell 24'
What does low voltage and high voltage do in terms of performance?
 

PyroX1040

New Member
Joined
Dec 17, 2007
Messages
283 (0.05/day)
Location
Chicago, IL
System Name Phoenix EGTX 8400
Processor Intel E8400 3.0Ghz / 4.5Ghz - 2000FSB 1.6375 Vcore
Motherboard 3VGA 132-CK-NF78-A1 LGA 775 NVIDIA nForce 780i SLI
Cooling Straight Air
Memory 4.0GB Kingston HyperX Gaming Ram 800Mhz [OC]
Video Card(s) SLI 3VGA 8800 GTX 606/1800 / BFG Tech PhysX GPU GDDR3
Storage Western Digital Raptor X 150GB 10,00RPM [x2]
Display(s) KDS 22" Widescreen 2ms
Case Tagan Aplus+ Black Pearl WCR Edition
Audio Device(s) Built In
Power Supply Silverstone Strider ST1000 1000W Modular Power Supply - SLI Ready x4
Software Windows XP Professional 2003 64 Bit
Benchmark Scores 3D Mark 06': 19000 On The Nose!
this is my first try on this brand new rig, haven't fully tested it but it seems stable so far.

6400+ B.E., stock volt.
HTT -1140mhz
Multiplier - 15
Crucial Ballistix ddr2-1066 @ ddr2-856 4-5-4-15
FSB - 228mhz
MSI K9A2 Platinum (790fx)
Zalman cnps9700 (24C idle)


o_O how in gods name does your 6400+ Idle @ 24C >.<! mine idles @ 35C, and loads @ 55-60C what about yours?
 

department76

New Member
Joined
Jan 7, 2008
Messages
519 (0.09/day)
Location
U of WY, USA
System Name Fusilli
Processor AMD Phenom II 965 C3 @ 3.9GHz (200x19.5, 1.51V)
Motherboard MSI K9A2 Platinum 790FX/SB600 (AM2+)
Cooling Zalman 9700NT, 2x silent 80mm & 2x 120mm Scythe & Enermax
Memory 4GB Patriot Viper DDR2 @ 1066 5-5-5-15 2.1V
Video Card(s) Sapphire HD4870 512MB @ 825/1050 (3x heatpipes)
Storage 2x 250GB RAID 0 - Seagate 7200.10 16MB on Promise FastTrak
Display(s) ViewSonic VX2450 & VX1940
Case Lian-Li PC60 PlusII
Audio Device(s) Auzen X-Fi Prelude, Denon AH-D1000 headphones
Power Supply OCZ GameXtreme 600W
Software Windows 7 Pro x64
Benchmark Scores 3DMark Vantage - P10909
o_O how in gods name does your 6400+ Idle @ 24C >.<! mine idles @ 35C, and loads @ 55-60C what about yours?

really? i load at ~40C and highest it's hit has been 42C! must be my gigantic zalman cnps9700 with tuniq tx-2 grease and good case cooling. i also have the hsf aimed upwards at the psu and blowhole. also, 790fx board might have soemthing to do with it? and it is a black edition 6400+, but since the multi doesnt go above x16 i'm not eve sure what BE does for the 6400+. i read my temps with AMD overdrive. i've been testing stability and applying overclocks in AOD and then applying it in BIOS once i've found it stable.

it's for sure stable at 3.45ghz with stock vcore, i'll venture up +.1V and see what happens :cool:
 
Last edited:

department76

New Member
Joined
Jan 7, 2008
Messages
519 (0.09/day)
Location
U of WY, USA
System Name Fusilli
Processor AMD Phenom II 965 C3 @ 3.9GHz (200x19.5, 1.51V)
Motherboard MSI K9A2 Platinum 790FX/SB600 (AM2+)
Cooling Zalman 9700NT, 2x silent 80mm & 2x 120mm Scythe & Enermax
Memory 4GB Patriot Viper DDR2 @ 1066 5-5-5-15 2.1V
Video Card(s) Sapphire HD4870 512MB @ 825/1050 (3x heatpipes)
Storage 2x 250GB RAID 0 - Seagate 7200.10 16MB on Promise FastTrak
Display(s) ViewSonic VX2450 & VX1940
Case Lian-Li PC60 PlusII
Audio Device(s) Auzen X-Fi Prelude, Denon AH-D1000 headphones
Power Supply OCZ GameXtreme 600W
Software Windows 7 Pro x64
Benchmark Scores 3DMark Vantage - P10909
just so you all can see my temps too, that's with my zalman on low via PWM control (1800rpm), high speed drops to lower 20s.


 

department76

New Member
Joined
Jan 7, 2008
Messages
519 (0.09/day)
Location
U of WY, USA
System Name Fusilli
Processor AMD Phenom II 965 C3 @ 3.9GHz (200x19.5, 1.51V)
Motherboard MSI K9A2 Platinum 790FX/SB600 (AM2+)
Cooling Zalman 9700NT, 2x silent 80mm & 2x 120mm Scythe & Enermax
Memory 4GB Patriot Viper DDR2 @ 1066 5-5-5-15 2.1V
Video Card(s) Sapphire HD4870 512MB @ 825/1050 (3x heatpipes)
Storage 2x 250GB RAID 0 - Seagate 7200.10 16MB on Promise FastTrak
Display(s) ViewSonic VX2450 & VX1940
Case Lian-Li PC60 PlusII
Audio Device(s) Auzen X-Fi Prelude, Denon AH-D1000 headphones
Power Supply OCZ GameXtreme 600W
Software Windows 7 Pro x64
Benchmark Scores 3DMark Vantage - P10909
had to play around with a few things, it would POST but windows would BSOD with the first few tries. ended up bumping vcore to 1.47V and gave HTT a slight bump as well to get windows to load. the 1.5V vcore had no effect at this speed, seems to ahve been the HTT increase that made it work. i dialed back my ram timings to rule that one out.

the 6400+ is eating away my low temps, hsf is speeding up to maintain similar temperatures.

edit: depedning on what clock i can muster, i might go back becuase i like a quieter computer. i don't see 85mhz being worth the noise/heat.

 
Last edited:
Joined
Jul 31, 2007
Messages
1,002 (0.16/day)
Processor i5-2500K @ 3.2Ghz
Motherboard ASRock Z68 Extreme3 Gen3
Memory Corsair Vengeance 8GB
Video Card(s) Radeon HD 7850 2GB
Storage 250GB Samsung EVO; 1TB WD Black
Display(s) 22" ASUS
Power Supply Rosewill Hive-650
Software Windows 8 64-bit
I got a new highest oc XD

*905.2
* 10
* Crucial ballistix 377(reads as 800)
* 301
* 1.3 XD
* Gigabyte(see specs)
* AMD Athlon 64 X2 4000+
* 2T??
* stock
 

Krony

New Member
Joined
Jan 22, 2008
Messages
288 (0.05/day)
Location
England
System Name Stealth Mk III
Processor Intel i7 950 @ 4.2GHz @ 1.38v
Motherboard Asus Sabertooth X58
Cooling Swiftech Apogee XT, Koolance NX580, 1x SR-1 120.4, 2x RX 120.2 rads
Memory 3x2Gb Corsair Dominator DDR3 PC3-12800C8
Video Card(s) Sli Evga 3Gb GTX 580's @ 825/1650/2025 @ 1.088v
Storage OS: 240Gb Vertex 3, Steam: 120Gb Vertex 2E, Storage: 1Tb F3, Backup: 1TB F1
Display(s) Samsung SM 2493HM
Case LD Cooling PC-V8
Audio Device(s) X-Fi Titanium
Power Supply Antec High Current Pro 1200w
Software Windows 7 Pro 64
Benchmark Scores 3DMark11 - P12324 / Vantage - P50183
Quite new to this but got my settings at

240\12x\1.45v 2880Mhz
HT Speed 4x
Ram DDR2 667\4-4-4-12-2T\2.2v

my card is clocked at 675\880Mhz

Temps are at 34 idle 50 load

Stable in 3DMark05 and Doom 3 but get errors in Prime95, any sugestions ?
 
Last edited:

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Quite new to this but got my settings at

240\12x\1.45v 2880Mhz
HT Speed 4x
Ram DDR2 667\4-4-4-12-2T\2.2v

my card is clocked at 675\880Mhz

Temps are at 34 idle 50 load

Stable in 3DMark05 and Doom 3 but get errors in Prime95, any sugestions ?
When you say your ram is at 667Mhz, is that what it's set at before you OC? If so, by my calculations, your ram is actually running at 720MHz. You may have to either relax the timings, or up the voltage.
 

Krony

New Member
Joined
Jan 22, 2008
Messages
288 (0.05/day)
Location
England
System Name Stealth Mk III
Processor Intel i7 950 @ 4.2GHz @ 1.38v
Motherboard Asus Sabertooth X58
Cooling Swiftech Apogee XT, Koolance NX580, 1x SR-1 120.4, 2x RX 120.2 rads
Memory 3x2Gb Corsair Dominator DDR3 PC3-12800C8
Video Card(s) Sli Evga 3Gb GTX 580's @ 825/1650/2025 @ 1.088v
Storage OS: 240Gb Vertex 3, Steam: 120Gb Vertex 2E, Storage: 1Tb F3, Backup: 1TB F1
Display(s) Samsung SM 2493HM
Case LD Cooling PC-V8
Audio Device(s) X-Fi Titanium
Power Supply Antec High Current Pro 1200w
Software Windows 7 Pro 64
Benchmark Scores 3DMark11 - P12324 / Vantage - P50183
Memory clock frequency is set to 667 in bios
On the modules it has OCZ PC2 7200\PN OCZN9002GK
in cpuz it shows OCZ PC2 6400 (400Mhz)\PN OCZN9001G
it is supposed to be good for at least 900Mhz
is it labeled wrong or is cpuz wrong ?

Also in bios my temp idle is 42
i get 34 in AI Booster and Core Temp
which is correct ?
 
Last edited:

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Memory clock frequency is set to 667 in bios
On the modules it has OCZ PC2 7200\PN OCZN9002GK
in cpuz it shows OCZ PC2 6400 (400Mhz)\PN OCZN9001G
it is supposed to be good for at least 900Mhz
is it labeled wrong or is cpuz wrong ?

Also in bios my temp idle is 42
i get 34 in AI Booster and Core Temp
which is correct ?
Then try 1.475 vcore, possibly 1.5v if necessary. If it's erroring out in Prime, something most likely wants more voltage.
 

Krony

New Member
Joined
Jan 22, 2008
Messages
288 (0.05/day)
Location
England
System Name Stealth Mk III
Processor Intel i7 950 @ 4.2GHz @ 1.38v
Motherboard Asus Sabertooth X58
Cooling Swiftech Apogee XT, Koolance NX580, 1x SR-1 120.4, 2x RX 120.2 rads
Memory 3x2Gb Corsair Dominator DDR3 PC3-12800C8
Video Card(s) Sli Evga 3Gb GTX 580's @ 825/1650/2025 @ 1.088v
Storage OS: 240Gb Vertex 3, Steam: 120Gb Vertex 2E, Storage: 1Tb F3, Backup: 1TB F1
Display(s) Samsung SM 2493HM
Case LD Cooling PC-V8
Audio Device(s) X-Fi Titanium
Power Supply Antec High Current Pro 1200w
Software Windows 7 Pro 64
Benchmark Scores 3DMark11 - P12324 / Vantage - P50183
Started fresh, stable in games,3DMark and Prime95 for 4 hours
216\13x\1.425v 2808MHz
HT Speed 4x
DDR2 800\4-4-3-5 2T\2.25v 401MHz
GPU 690\900MHz

Temps are at 36 idle 56 load

3DMark05 11985
3DMark06 7712

Benchmark results, anygood?

Gonna wait till i get a new case and bigger PSU to go further i think, and maybe SLI
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Started fresh, stable in games,3DMark and Prime95 for 4 hours
216\13x\1.425v 2808MHz
HT Speed 4x
DDR2 800\4-4-3-5 2T\2.25v 401MHz
GPU 690\900MHz

Temps are at 36 idle 56 load

3DMark05 11985
3DMark06 7712

Benchmark results, anygood?

Gonna wait till i get a new case and bigger PSU to go further i think, and maybe SLI

Your results are on par with similar setups. Doin good.

And instead of going SLI on the 7900, update to a newer card like an 8800GT/GTS or a HD3870. They'll all out perform the 7900 SLI setup.
 
Joined
Jan 19, 2007
Messages
1,124 (0.18/day)
Location
Chicago
Processor Amd Ryzen 5 5600x kryonaut paste
Motherboard Asus Prime X570 P bios 4021
Cooling Thermaltake Water 3.0 360mm (top mounted for exhaust) 3 Thermaltake 140mm riing rgb case fans
Memory G.Skill Trident Z Neo DDR4 3600 cl16 2x16 dual rank
Video Card(s) Sapphire Nitro+ RX 5700XT OC
Storage Seagate Firecuda 520 500gb NVMe PCIE Gen4 x 4 boot drive XPG S70 Blade Gen 4 x 4 NVMe gaming drive
Display(s) MSI Mag321CQR 32 inch curved 144 hz 1ms
Case Thermaltake View 31
Audio Device(s) Corsair Void USB RGB Dolby Digital 7.1 Headphones
Power Supply Thermaltake Grand RGB 750w
Mouse Corsair Harpoon RGB
Keyboard Corsair K55 RGB
Software Windows 11 Professional
Your results are on par with similar setups. Doin good.

And instead of going SLI on the 7900, update to a newer card like an 8800GT/GTS or a HD3870. They'll all out perform the 7900 SLI setup.

Hey Wile e,
Been meaning to talk to you haven't seen you around lately. Not to be off topic again, lol but I got my Axeram 1200 and can't get it stable at 1200mhz. Did you mess with sub timings to hit 1200? And it looks like your running 400fsb with a 3 multiplier?
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Hey Wile e,
Been meaning to talk to you haven't seen you around lately. Not to be off topic again, lol but I got my Axeram 1200 and can't get it stable at 1200mhz. Did you mess with sub timings to hit 1200? And it looks like your running 400fsb with a 3 multiplier?
Nope, no adjustment here. Could be your chipset. More ram speed mean more work for it. Bump your chipset volts up a notch. Also, your mobo may slightly undervolt, try a notch higher on the vdimm if the NB bump doesn't work.
 
Joined
Jan 19, 2007
Messages
1,124 (0.18/day)
Location
Chicago
Processor Amd Ryzen 5 5600x kryonaut paste
Motherboard Asus Prime X570 P bios 4021
Cooling Thermaltake Water 3.0 360mm (top mounted for exhaust) 3 Thermaltake 140mm riing rgb case fans
Memory G.Skill Trident Z Neo DDR4 3600 cl16 2x16 dual rank
Video Card(s) Sapphire Nitro+ RX 5700XT OC
Storage Seagate Firecuda 520 500gb NVMe PCIE Gen4 x 4 boot drive XPG S70 Blade Gen 4 x 4 NVMe gaming drive
Display(s) MSI Mag321CQR 32 inch curved 144 hz 1ms
Case Thermaltake View 31
Audio Device(s) Corsair Void USB RGB Dolby Digital 7.1 Headphones
Power Supply Thermaltake Grand RGB 750w
Mouse Corsair Harpoon RGB
Keyboard Corsair K55 RGB
Software Windows 11 Professional
Nope, no adjustment here. Could be your chipset. More ram speed mean more work for it. Bump your chipset volts up a notch. Also, your mobo may slightly undervolt, try a notch higher on the vdimm if the NB bump doesn't work.

Yeah, I've done that. Nb is at 1.55v vdimm is at 2.25 because theres no option for 2.2 in bios. It could be the 965 chipset. Although the guys at mushkin were running over 1200 on p5b's. Any other ideas?
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Yeah, I've done that. Nb is at 1.55v vdimm is at 2.25 because theres no option for 2.2 in bios. It could be the 965 chipset. Although the guys at mushkin were running over 1200 on p5b's. Any other ideas?
Maybe you need more airflow? These are warm modules. It's also possible the Mushkin guys had cherry picked boards.

Do you have a 2.3V option? Give that a shot maybe?
 

Krony

New Member
Joined
Jan 22, 2008
Messages
288 (0.05/day)
Location
England
System Name Stealth Mk III
Processor Intel i7 950 @ 4.2GHz @ 1.38v
Motherboard Asus Sabertooth X58
Cooling Swiftech Apogee XT, Koolance NX580, 1x SR-1 120.4, 2x RX 120.2 rads
Memory 3x2Gb Corsair Dominator DDR3 PC3-12800C8
Video Card(s) Sli Evga 3Gb GTX 580's @ 825/1650/2025 @ 1.088v
Storage OS: 240Gb Vertex 3, Steam: 120Gb Vertex 2E, Storage: 1Tb F3, Backup: 1TB F1
Display(s) Samsung SM 2493HM
Case LD Cooling PC-V8
Audio Device(s) X-Fi Titanium
Power Supply Antec High Current Pro 1200w
Software Windows 7 Pro 64
Benchmark Scores 3DMark11 - P12324 / Vantage - P50183
Thx, can't find any 7900's on sale anyhow, plus it would have to be a Winfast to link them i think, and not much room on my board for 2 cards and sound card, it would hamper air flow to 1 of the cards.
8800 GTX or 8800 Ultra ?
is the ultra worth the extra cash
 
Joined
Aug 19, 2006
Messages
279 (0.04/day)
Location
USA
Processor Intel i7-8700K
Motherboard Asus Z390-A Prime
Cooling NZXT Kraken x63
Memory 32GB DDR4-3200
Video Card(s) EVGA RTX 3080 FTW3 Ultra
Storage 1TB NVME, 1TB Raid 0 (Samsung 500gb SSD), 248gb SSD Boot Generic
Display(s) Dell S2716DG x2
Case Phanteks P400
Power Supply Gigabyte 750W Modular
Mouse Razr Deathadder Elite
Keyboard Corsair K70
Software Windows 10 Professional
Clock: 3.0GHZ
Core: X2 3800 toledo (939) stock is 2.0Ghz
HTT: 300
Memory 2GB A-Data DDR400 @ 300Mhz CL3-3-3-8
Volts- 1.544
HT Speed 3x
 

Attachments

  • 3.02.JPG
    3.02.JPG
    44.5 KB · Views: 404

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Thx, can't find any 7900's on sale anyhow, plus it would have to be a Winfast to link them i think, and not much room on my board for 2 cards and sound card, it would hamper air flow to 1 of the cards.
8800 GTX or 8800 Ultra ?
is the ultra worth the extra cash
No, the Ultra isn't worth the extra money. Don't get either. Get either an 8800GT, or a 512MB 8800GTS (g92).
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.42/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
HTT Speed: 1000MHz
Multiplier: 11x
Memory type and speed: Crucial non-Ballistix/Tracer/Lanfeast 2x1GB DDR2 533
FSB: 250
CPU Voltage: 1.333
Motherboard Type/Brand: DFI Lanparty 590SLI
CPU Type: 5200+ Windsor 2x1MB cache
Memory timings: DDR600 4-4-4-12-1T
Cooling: 1x80mm case fan, AC Freezer 64 Pro, AZENX PCI slot fan
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
HTT Speed: 1000MHz
Multiplier: 11x
Memory type and speed: Crucial non-Ballistix/Tracer/Lanfeast 2x1GB DDR2 533
FSB: 250
CPU Voltage: 1.333
Motherboard Type/Brand: DFI Lanparty 590SLI
CPU Type: 5200+ Windsor 2x1MB cache
Memory timings: DDR600 4-4-4-12-1T
Cooling: 1x80mm case fan, AC Freezer 64 Pro, AZENX PCI slot fan
You can go way higher than that safely, hat. I ran my 6400+ at 1.5V 24/7 on my Freezer64 Pro. You should at least try to see where you can go on at least 1.4v. The 6000+ and 6400+ stock at 1.4v, and they're also Windsor cores, so it's perfectly safe. Actually, 1.5v is perfectly safe for these chips too, but I know you like to err on the side of caution, so go for 1.4V.
 
Top