• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

X800 fuses data for unlocking

Joined
May 13, 2006
Messages
1,005 (0.15/day)
Processor i9 10850k
Motherboard Asus strix Z-490-e
Cooling Arctic Liquid Freezer II 360
Memory G.SKILL Trident Z 4000mhz
Video Card(s) Asus STRIX RTX 3080
Storage 1tb Samsung 970 EVO,1tb hdd,750gb hdd
Display(s) Asus 27" 144htz 1440
Case Lian Li lancool 2 mesh
Audio Device(s) Onboard
Power Supply Seasonic GX-850
Mouse Logitech G502 Hero
Keyboard Logitech Pro
Im new here and really want to flash my X800GTO.Here is all the info from the core and memory.

R480
215R8PAGA11F
GG211.1
0512AA

Samsung 543
K4J55323QFGC20



Card is AGP 256mb
 

mmx

New Member
Joined
Feb 13, 2006
Messages
339 (0.05/day)
Location
Europe
jlewis02 said:
Im new here and really want to flash my X800GTO.Here is all the info from the core and memory.

R480
215R8PAGA11F
GG211.1
0512AA

Samsung 543
K4J55323QFGC20



Card is AGP 256mb
Sorry, no more pipes for you.
 
Joined
May 13, 2006
Messages
1,005 (0.15/day)
Processor i9 10850k
Motherboard Asus strix Z-490-e
Cooling Arctic Liquid Freezer II 360
Memory G.SKILL Trident Z 4000mhz
Video Card(s) Asus STRIX RTX 3080
Storage 1tb Samsung 970 EVO,1tb hdd,750gb hdd
Display(s) Asus 27" 144htz 1440
Case Lian Li lancool 2 mesh
Audio Device(s) Onboard
Power Supply Seasonic GX-850
Mouse Logitech G502 Hero
Keyboard Logitech Pro
Well that sucks good thing it clocks good then.
 

DirtyMetis

New Member
Joined
May 15, 2006
Messages
5 (0.00/day)
Me too, me too!!!

Just received my Sapphire x800 GTO 256 (AGP) today, hopin' to unlock to 16 pipes & OC just like everyone else, here's my spec - lemme know, Thanks! :)

 

mmx

New Member
Joined
Feb 13, 2006
Messages
339 (0.05/day)
Location
Europe
DirtyMetis said:
Just received my Sapphire x800 GTO 256 (AGP) today, hopin' to unlock to 16 pipes & OC just like everyone else, here's my spec - lemme know, Thanks! :)

Yes :rockout: you are lucky...... post your bios to mod it.
 

johnmuffins

New Member
Joined
May 16, 2006
Messages
3 (0.00/day)
Thanks in advance.

1. I wanted to know how many more pipes i can unlock?

2. Also if anyway I could solder an external power connector for my x800gt.

Model:
Sapphire x800gt 256mb pci-e (red pcb)

Chip Markings: X800GT
215RBMAGA12F
GG3819.1
0531SS
I clearly see a thin line (laser cut?) between the dots at the right corner of the chip.

I am also attaching a copy of my bios.

thanks again.

 

Attachments

  • MYX800GT.zip
    33.9 KB · Views: 385
Last edited:

pi2

New Member
Joined
May 17, 2006
Messages
2 (0.00/day)
Hey guys, I was also wondering whether I could get the extra pipelines.
 

Attachments

  • x800.jpg
    x800.jpg
    45.1 KB · Views: 503
  • bios.zip
    34.3 KB · Views: 384
Joined
May 28, 2005
Messages
4,994 (0.73/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
Yep, looks good, If you could post your email address, dolf can send you his cd image... a nifty automated flashing tool :D
 

DirtyMetis

New Member
Joined
May 15, 2006
Messages
5 (0.00/day)
Results for Sapphire x800GTO 256 AGP

My thanks to dolf (and tool483 for sending it my way) for his slick .ISO image, worked like a charm. Unlocked to 16 pipes and 420/525 without a hiccup.

Was a bit miffed, however, when I went to plug in the card with my newly attached Silencer 5.2 and found an accursed oversized and misplaced transistor on mobo that wouldn't allow for that setup. :mad:

Dug out the Artic Silver 5 and slapped the factory heatsink unit back on. UL'd and OC'd card scored me a 1713 in 3DMark06.

Was a bit disappointed with the results, thought it would be a good deal higher than my 6800nu but only a 17 point difference. Any insight?
 

kouz-one

New Member
Joined
May 6, 2006
Messages
22 (0.00/day)
dirtymetis and pi2, you are lucky, your cards can be unlock I think ;)
johnmuffins I don't think that yours can be unfortunately
 

kouz-one

New Member
Joined
May 6, 2006
Messages
22 (0.00/day)
DirtyMetis said:
My thanks to dolf (and tool483 for sending it my way) for his slick .ISO image, worked like a charm. Unlocked to 16 pipes and 420/525 without a hiccup.

Was a bit miffed, however, when I went to plug in the card with my newly attached Silencer 5.2 and found an accursed oversized and misplaced transistor on mobo that wouldn't allow for that setup. :mad:

Dug out the Artic Silver 5 and slapped the factory heatsink unit back on. UL'd and OC'd card scored me a 1713 in 3DMark06.

Was a bit disappointed with the results, thought it would be a good deal higher than my 6800nu but only a 17 point difference. Any insight?
that's normal cause x800series has the power but not the latest graphics technologies like sm3,etc... and 3dmark06 depends much more of your entire system, i do approximatively same score than you with a 2.8 prescott @3.1, x800gto @435/535/16pp and 2x1go ddr
 

julanli

New Member
Joined
May 15, 2006
Messages
2 (0.00/day)
I have a shapire x800 gto AGP. Is it possible to unlock pipelines?

Thanks in advance.
 

Attachments

  • bios.zip
    34.3 KB · Views: 356
  • setting.JPG
    setting.JPG
    34.5 KB · Views: 540

kouz-one

New Member
Joined
May 6, 2006
Messages
22 (0.00/day)
julanli, you are lucky ;) you should try to flash your card with this
 

Attachments

  • x800new.zip
    34.3 KB · Views: 393

kouz-one

New Member
Joined
May 6, 2006
Messages
22 (0.00/day)
you have to wait someone who has it, unfortunately i had erase the iso file that i have receive here :(
or else try to use atiflash last version, copy it on a formated boot disk with the file i had send you higher ;)
 

matieches

New Member
Joined
May 18, 2006
Messages
9 (0.00/day)
Hi Friends, i new in this forum. who can help my to modificate this bios ?? Its for activate 16 Pipes on Sapphire X800GTO 128Mb PCI Expres R430 256 Bits. Thanks a lot (i dont speak english well jej). ;) Yo can explain the process to flash when i have the bios modificated. Thanks again !
 

Attachments

  • x800atitools.JPG
    x800atitools.JPG
    66 KB · Views: 485
  • NEWBIOS.zip
    34 KB · Views: 304
Last edited:

johnmuffins

New Member
Joined
May 16, 2006
Messages
3 (0.00/day)
ATI gurus i need your help

:respect:

Can someone please tell me if this unlocks to 16. thanks ATi gurus.

Here is my fuse:


Attached is my bios.

I posted 2 days ago with my newly bought Sapphire x800gt from newegg for $69.99

RMA'd it and replaced it with this HIS excalibur turbo II x800gto for $20 more. It also had a 6-pin pcie power connector.

There's one left:
http://www.newegg.com/Product/Product.asp?Item=N82E16814161146R
 

Attachments

  • HX800GTO.zip
    34.1 KB · Views: 337

mmx

New Member
Joined
Feb 13, 2006
Messages
339 (0.05/day)
Location
Europe
johnmuffins said:
:respect:

Can someone please tell me if this unlocks to 16. thanks ATi gurus.

Here is my fuse:


Attached is my bios.

I posted 2 days ago with my newly bought Sapphire x800gt from newegg for $69.99

RMA'd it and replaced it with this HIS excalibur turbo II x800gto for $20 more. It also had a 6-pin pcie power connector.

There's one left:
http://www.newegg.com/Product/Product.asp?Item=N82E16814161146R
Here is your modified bios , use atiflash -p 0(zero) -newbios hx80016.bin
 

Attachments

  • HX80016.zip
    34 KB · Views: 324

johnmuffins

New Member
Joined
May 16, 2006
Messages
3 (0.00/day)
thanks for the help!!! :rockout:

Its showing 16 pipes now. will try to find stable OC clocks now.

thank you very much! :toast: Very much appreciated.
 

Pix

New Member
Joined
May 18, 2006
Messages
35 (0.01/day)
Location
Manchester, UK
Processor E7200 @ 400 x 9.5 = 3.8Ghz 1.296v
Motherboard Gigabyte P35 DS3L Rev 2.0
Cooling Arctic Cooling Freezer 7 Pro
Memory 6GB Elixir DDR2 800
Video Card(s) Powercolor 5850 1GB @ stock
Storage 1 x 750GB Samsung SATA, 1 x 500GB WD SATA, 1 x Seagate 500GB IDE, 1 x Seagate 320GB external
Display(s) LG Flatron 22" Widescreen
Case Sharkoon cheapass case
Audio Device(s) Creative X-Fi
Power Supply Corsair VX550 550W
Software Windows XP Professional SP2/Windows 7 Ultimate 64-bit
Dolf's bootable ISO X800 GTO flash

Hey guys, well done to Dolf and everyone else for sharing their knowledge, enabling us all to be better off. :)


All i need, if anybody here would be kind enough to help me, is that ISO image that's been going around here. The card I have is the right one, the fuse data all corresponds.

Wanted to do it now, but after buying a pack of ten floppies, after first finding somebody who actually still sells them, it seems it's my floppy drive that's knackered. :rolleyes:

That's the first time it's ever been the drive itself. Anyway, this means I'll hafta do it on a bootable CD, which I'd prefer.

So would anyone be kind enough to e-mail me Dolf's bootable ISO? My e-mail is hpm@inbox.com

The card is a Sapphire X800GTO 256 AGP. Just a 16-pipe BIOS would be ace.


Thanks in advance!

:toast:
 

Bushnoh

New Member
Joined
May 18, 2006
Messages
1 (0.00/day)
Location
Manchester, UK
Hey, I have a GeCube x800GT, PCI-E with 256mb



Can i unlock it?

But first i am a total noob to all this so what exactly does reconnect a lasercut involve, i presume its something on my gpu, and what would i use to recconect it?
And finally, will it decrease the life of my gfx card or increase the temperature at all?

Thanx alot for your help,
VERY much appreciated :eek:
 
Top