CyberDruid
New Member
- Joined
- Sep 23, 2007
- Messages
- 2,887 (0.48/day)
- Location
- On top of a mountain
- Heatware
- 18 0 0
System Name | Shop Dog |
---|---|
Processor | E8400 |
Motherboard | Asus Blitz Formula SE |
Cooling | d-Tek FuZion |
Memory | 2 x 2GB DDR2 800 G Skill |
Video Card(s) | EVGA 7900 GTX |
Storage | 150GB VelociRaptor |
Display(s) | Acer 21.5 1080p LED Back Lit Monitor |
Case | Working on it |
Audio Device(s) | PCI SoundMax |
Power Supply | Silverstone 750 Modular |
Software | XP Pro SP2 |
Benchmark Scores | Super Pi 11.56s 1M at 4050mhz |
I am totally opposed to Heatware and think it's 90% Bullshit. Easy as hell to fake your Heat. However my Heat registered name and TPU Heat alias is CyberDruid. I don't and won't use Heat so I registered and posted this to satisfy the letter of the law. If you really want to see some credentials you can trust go to OverClock.net and check out my Trader Rep or eBay (richardwarren2005).
Hey guys this will be my second FS thread here at TPU and I am listing my best LC gear. Everything is top notch and works great. Shipped price is for the US. I prefer PayPal. In fact unless we work out something via PM assume PayPal. I am willing to do combination pricing for multiple larger purchases. I have tried to combo pricing throughout the listing. If you have a group of items PM to discuss it. Anything under 13 ounces goes First Class USPS. Anything over 13 ounces goes Priority USPS. I ship within 24 hours of Payment.
I would prefer to sell lots rather than by the piece but I will take it as it comes.
The stuff...
http://img26.imageshack.us/img26/6964/blocks006.jpg
EK 100 and EK 150 Reservoirs. 100 comes with acrylic clips and 2 EK plugs no barbs. EK 150 comes with one black clip and 2 EK Plugs no barbs. EK100 $25 Shipped. EK150 $30 sold to Chicken Patty. One black (indestructible) EK reservoir clip $7 shipped. SOLD to erocker EK 100 Reservoir
These are New (liquidated inventory from my store) powdercoated steel rad grills by Iandh just like Petras carries for $34 for the MCR320 radiator. $20 each shipped.
3 available. By all three for $50 shipped and save.
http://img87.imageshack.us/img87/134/lcsale005.jpg
PA 120.3 sells for $100 or more new (when you can find them). $80 Shipped SOLD
PA120.2 sells for around $100 but are hard to find. Impossible more like. This one comes with high flow barbed fittings for 1/2" ID tubing. $70 Shipped
HW Labs Black Ice GTX240...the fat one. A nice looking radiator. Sells for $90-100 new. $65 Shipped.
http://img87.imageshack.us/img87/4214/lcsale008.jpg
Swiftech MCR320. Possibly the best radiator for the money. Instantly purges, cools well with low cfm fans. This one is only a few months old but is a bit dusty looking. Sells for $55 or more new. $45 SOLD
You know them you love them the MCP 655 Vario. What a pump ladies and gentlemen. Basically an $80 pump. I have two that have about 45 days of use on them. Foam pad still virgin. $75 each Shipped. Buy Both for $125 Shipped.
Alphacool Ultras. Your basic $120 top of the line DC type pump.
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=201&products_id=4509 $100 each shipped. Buy both for $175 Shipped
Gigantor sized no-leak quick disconnect PFTE fittings. THese are for 5/8"ID tubing but 1/2" wil stretch onto them. The males are bulkhead fittings. Ideal for mounting on the shell of an external cooler. $30 Shipped
Quick Disconnects (self sealing) with compression fittings for 3/8ID 5/8OD Tubing (like Tygon 3603). I also have the males for these same same. $18 per set of M-F shipped. These are new, unopened.
Koolance compression fittings (all brass Nickel plated) for 3/8-5/8 Tubing. $6 per pair shipped. 3 pairs available.
http://img141.imageshack.us/img141/3884/lcsale014.jpg
d-Tek Fuzion with Promount and FitSeries3 Massive Acrylic Top. Comes with Backing Plate. Comes with Barbed Fittings for 1/2ID tubing. $60 .SOLD
D-tek FuZion Nozzle kits. $5 Shipped 1 Available. 1 SOLD
LGA775 Quick Mount for d-Tek FuZion. Obviates need for tools or backingplate. $7 Shipped
d-Tek FuZion with ProMount. Lacks backing plate. Comes with barbed Fittings for1/2 ID Tubing. $35 Shipped.
http://img365.imageshack.us/img365/8061/lcsale018.jpg
d-Tek FuZion with rev1 mounting kit for Intel or AMD and a drilled out backing plate and a mounting kit from a fstfrddy Stinger waterblock. It's funkadelic. You can crank it down till your CPU begs for mercy. $35 shipped SOLD to erocker
http://img12.imageshack.us/img12/5480/blocks001.jpg Amazing Alphacool HDD waterblocks. Never used. Only drooled on. I kept thinking I was going to nut up and LC my HDDs but never did. EXPENSIVE blocks...Massive. $50 Each SOLD
http://img141.imageshack.us/img141/6692/lcsale027.jpg
Storm Waterblocks. Awesome blocks but are vastly under-rated. No Mounting HW. Use some 6-32 machine screws. COme with barbed fittings for 1/2 ID tube. $25 each shipped. But all three for $60 SOLD.
http://img148.imageshack.us/img148/5206/lcsale020.jpg
16 pairs of Koolance Compression fittings for 3/8 ID 1/16" wall tubing (10mm-13mm) like the Feser and koolance 3/8 tubing. Awesome little fittings that are as small as it gets. $5 per pair shipped. Buy all 16 pair for $60 Shipped. SOLD
http://img136.imageshack.us/img136/5923/lcsale021.jpg
Quick Disconnects. Male and Female as a pair for 3/8-1/2 tubing (like the fittings above) $15 per pair shipped or two pair for $25 shipped. SOLD
Cool polycarbonate pump top for ganging two DDC pumps to increase pressure anc improve flow characteristics. COmes in clamshell package with mounting HW and allen wrench. Never used it. $20 shipped
0-15PSI gauge perfect range for monitoring the actual pressure of your closed loop cooling system. Ashcroft. Quality industrial gauge. In box with mounting HW. Never Used. $15 shipped.
Temp probes that can screw into a port of a reservoir or in a T fitting or wherever theheck you want. Sheathed. Two have the leads folded inside the sheathing to make them appear shorter. Bitspower. $7 each shipped or all 4 for $20 Shipped.
On the left Danger Den Delrin T fittings on the Right Koolance all Brass Nickel Plated 5 port blocks. No plugs or other fittings. $7 each shipped or buy all 4 for $20 shipped.
At the top a pair of Bitspower G3/8 to G1/4 adapters required toi convert a radiator such as the PA120.3 to conventional sized fittings. $7 shipped for the pair SOLD. In the middle Male to Male G1/4 fittings useful when connecting a reservoir to a pump or making a spacer. $5 each shipped. Buy all 5 for $20 Shipped. At the bottom 3 Female to Female G1/4 fittings. $5 Each or all 3 for $12 Shipped. Buy all the fittings decribed above as one lot for $35 shipped.
Polycarbonate g1/4 plugs with a detent for a 5mm LED. $5 each shipped or both for $8 Shipped.
http://img232.imageshack.us/img232/9377/lcsale022.jpg
Danger Den Delrin FilPorts. No Fittings. Allen key included. $10 each shipped or both for $15.SOLD
I hope that was as much fun for you as it was for me
PM about pricing. All other questions I will gladly answer here. PayPal only unless details are worked out via PM. Thanks
Hey guys this will be my second FS thread here at TPU and I am listing my best LC gear. Everything is top notch and works great. Shipped price is for the US. I prefer PayPal. In fact unless we work out something via PM assume PayPal. I am willing to do combination pricing for multiple larger purchases. I have tried to combo pricing throughout the listing. If you have a group of items PM to discuss it. Anything under 13 ounces goes First Class USPS. Anything over 13 ounces goes Priority USPS. I ship within 24 hours of Payment.
I would prefer to sell lots rather than by the piece but I will take it as it comes.
The stuff...
http://img26.imageshack.us/img26/6964/blocks006.jpg
EK 100 and EK 150 Reservoirs. 100 comes with acrylic clips and 2 EK plugs no barbs. EK 150 comes with one black clip and 2 EK Plugs no barbs. EK100 $25 Shipped. EK150 $30 sold to Chicken Patty. One black (indestructible) EK reservoir clip $7 shipped. SOLD to erocker EK 100 Reservoir
These are New (liquidated inventory from my store) powdercoated steel rad grills by Iandh just like Petras carries for $34 for the MCR320 radiator. $20 each shipped.
3 available. By all three for $50 shipped and save.
http://img87.imageshack.us/img87/134/lcsale005.jpg
PA 120.3 sells for $100 or more new (when you can find them). $80 Shipped SOLD
PA120.2 sells for around $100 but are hard to find. Impossible more like. This one comes with high flow barbed fittings for 1/2" ID tubing. $70 Shipped
HW Labs Black Ice GTX240...the fat one. A nice looking radiator. Sells for $90-100 new. $65 Shipped.
http://img87.imageshack.us/img87/4214/lcsale008.jpg
Swiftech MCR320. Possibly the best radiator for the money. Instantly purges, cools well with low cfm fans. This one is only a few months old but is a bit dusty looking. Sells for $55 or more new. $45 SOLD
You know them you love them the MCP 655 Vario. What a pump ladies and gentlemen. Basically an $80 pump. I have two that have about 45 days of use on them. Foam pad still virgin. $75 each Shipped. Buy Both for $125 Shipped.
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=201&products_id=4509 $100 each shipped. Buy both for $175 Shipped
Gigantor sized no-leak quick disconnect PFTE fittings. THese are for 5/8"ID tubing but 1/2" wil stretch onto them. The males are bulkhead fittings. Ideal for mounting on the shell of an external cooler. $30 Shipped
Quick Disconnects (self sealing) with compression fittings for 3/8ID 5/8OD Tubing (like Tygon 3603). I also have the males for these same same. $18 per set of M-F shipped. These are new, unopened.
Koolance compression fittings (all brass Nickel plated) for 3/8-5/8 Tubing. $6 per pair shipped. 3 pairs available.
http://img141.imageshack.us/img141/3884/lcsale014.jpg
d-Tek Fuzion with Promount and FitSeries3 Massive Acrylic Top. Comes with Backing Plate. Comes with Barbed Fittings for 1/2ID tubing. $60 .SOLD
D-tek FuZion Nozzle kits. $5 Shipped 1 Available. 1 SOLD
LGA775 Quick Mount for d-Tek FuZion. Obviates need for tools or backingplate. $7 Shipped
d-Tek FuZion with ProMount. Lacks backing plate. Comes with barbed Fittings for1/2 ID Tubing. $35 Shipped.
http://img365.imageshack.us/img365/8061/lcsale018.jpg
d-Tek FuZion with rev1 mounting kit for Intel or AMD and a drilled out backing plate and a mounting kit from a fstfrddy Stinger waterblock. It's funkadelic. You can crank it down till your CPU begs for mercy. $35 shipped SOLD to erocker
http://img12.imageshack.us/img12/5480/blocks001.jpg Amazing Alphacool HDD waterblocks. Never used. Only drooled on. I kept thinking I was going to nut up and LC my HDDs but never did. EXPENSIVE blocks...Massive. $50 Each SOLD
http://img141.imageshack.us/img141/6692/lcsale027.jpg
Storm Waterblocks. Awesome blocks but are vastly under-rated. No Mounting HW. Use some 6-32 machine screws. COme with barbed fittings for 1/2 ID tube. $25 each shipped. But all three for $60 SOLD.
http://img148.imageshack.us/img148/5206/lcsale020.jpg
16 pairs of Koolance Compression fittings for 3/8 ID 1/16" wall tubing (10mm-13mm) like the Feser and koolance 3/8 tubing. Awesome little fittings that are as small as it gets. $5 per pair shipped. Buy all 16 pair for $60 Shipped. SOLD
http://img136.imageshack.us/img136/5923/lcsale021.jpg
Quick Disconnects. Male and Female as a pair for 3/8-1/2 tubing (like the fittings above) $15 per pair shipped or two pair for $25 shipped. SOLD
Cool polycarbonate pump top for ganging two DDC pumps to increase pressure anc improve flow characteristics. COmes in clamshell package with mounting HW and allen wrench. Never used it. $20 shipped
0-15PSI gauge perfect range for monitoring the actual pressure of your closed loop cooling system. Ashcroft. Quality industrial gauge. In box with mounting HW. Never Used. $15 shipped.
Temp probes that can screw into a port of a reservoir or in a T fitting or wherever theheck you want. Sheathed. Two have the leads folded inside the sheathing to make them appear shorter. Bitspower. $7 each shipped or all 4 for $20 Shipped.
On the left Danger Den Delrin T fittings on the Right Koolance all Brass Nickel Plated 5 port blocks. No plugs or other fittings. $7 each shipped or buy all 4 for $20 shipped.
At the top a pair of Bitspower G3/8 to G1/4 adapters required toi convert a radiator such as the PA120.3 to conventional sized fittings. $7 shipped for the pair SOLD. In the middle Male to Male G1/4 fittings useful when connecting a reservoir to a pump or making a spacer. $5 each shipped. Buy all 5 for $20 Shipped. At the bottom 3 Female to Female G1/4 fittings. $5 Each or all 3 for $12 Shipped. Buy all the fittings decribed above as one lot for $35 shipped.
Polycarbonate g1/4 plugs with a detent for a 5mm LED. $5 each shipped or both for $8 Shipped.
http://img232.imageshack.us/img232/9377/lcsale022.jpg
Danger Den Delrin FilPorts. No Fittings. Allen key included. $10 each shipped or both for $15.SOLD
I hope that was as much fun for you as it was for me
PM about pricing. All other questions I will gladly answer here. PayPal only unless details are worked out via PM. Thanks
Last edited: