EastCoasthandle
New Member
- Joined
- Apr 21, 2005
- Messages
- 6,885 (0.99/day)
System Name | MY PC |
---|---|
Processor | E8400 @ 3.80Ghz > Q9650 3.60Ghz |
Motherboard | Maximus Formula |
Cooling | D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB |
Memory | XMS 8500C5D @ 1066MHz |
Video Card(s) | HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean) |
Storage | 2 |
Display(s) | 24" |
Case | P180 |
Audio Device(s) | X-fi Plantinum |
Power Supply | Silencer 750 |
Software | XP Pro SP3 to Windows 7 |
Benchmark Scores | This varies from one driver to another. |
Cat 9.6
9-6_xp32-64_xcode.exe (Avivo)
Release notes
9-6_xp32-64_xcode.exe (Avivo)
Release notes
The Catalyst Software Suite 9.6 contains the following:
- Radeon™ display driver 8.62
- HydraVision™ for both Windows XP and Vista
- HydraVision™ Basic Edition (Windows XP only)
- WDM Driver Install Bundle
- Southbridge/IXP Driver
- Catalyst™ Control Center Version 8.62
Catalyst™ 9.6 brings performance benefits in several cases where framerates are CPUlimited.
Some measured examples are:
- Company of Heroes – performance improves up to 25% with HD 4600 series products and below as well as improvements of up to 10% on HD 4800 series
- Crysis – performance improves up to 13% in multi-GPU configurations Crysis Warhead – performance improves up to 11% in multi-GPU configurations
- World in Conflict – performance improvements of up to 30% can be seen in settings that were previously CPU limited
This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for all Windows OS. These include:
- Opening Crossfire pages no longer causes Catalyst Control Center to stop responding
- Catalyst Control Center: With some multi adapter systems in clone mode, disabling the primary display is now possible
- Changing the bitrate slider values, while transcoding WMV files, no longer causes Catalyst Control Center to stop responding
- Catalyst Control Center: On some systems configurations, the Overdrive options no longer fails to display
- Catalyst Control Center content no longer appears interlaced when automatic deinterlacing is enabled
- Catalyst Control Center: Display settings no longer missing when hot plugging a CRT display in clone mode
- Catalyst Control Center: Scaling option slider is no longer inadvertently enabled when using a non-HDTV resolution
- Fixed a regression in ATI CAL that caused certain IL kernels that compiled and executed properly with Catalyst version prior to 9.4 to no longer work properly with Catalyst 9.4 or later
SourceWe have just released ATI Catalyst™ 9.6 for Windows 7, Windows Vista, Windows XP, and Linux platforms on http://www.amd.com
Highlights of the Linux ATI Catalyst™ 9.6 release include:
Support for new Linux operating systems
* This release of ATI Catalyst™ Linux introduces support for the following new operating systems:
o SLED and SLED 11 production support
o RHEL 4.8 early look support
MultiView for Consumer users
* Allows users to render applications using a multiple GPU configuration with a unified workspace
* Enables Xinerama in single or multiple GPU configurations
* Supported on any combination of the ATI Radeon™ HD 4000, ATI Radeon™ 3000 Series and ATI Radeon™ 2000 Series of graphics cards
For more information on ATI Catalyst™ 9.6 (for Windows 7, Windows Vista, Windows XP, and Linux versions), including all of the resolved issues in this release, please see the ATI Catalyst™ 9.6 release notes.
ATI MultiView
ATI MultiView provides the ability to utilize GPUs from multiple adapters on an independent multi-display desktop. It allows a user to configure, manage and use a Multiview configuration under Linux and allows OpenGL applications run on any displays driven by multiple GPUs. ATI MultiView™ provides:
* Multi-GPU configuration support
* Up to 4 displays support
* Enhanced display configuration and selection through the Catalyst Control Center Linux Edition
* Administrator shortcut which provides access to configuration options that require root privileges. Root privileges are required for multi-screen configurations, including enabling and disabling certain multi-screen configurations and screen placement.
* ATI MultiView™ only works on systems with two identical FireGL™ products which include:
o ATI FireGL™ V7700
o ATI FireGL™ V7400
o ATI FireGL™ V5600
o ATI FireGL™ V5200
o ATI FireGL™ V3700
o ATI FireGL™ V3600
o ATI FireGL™ V3400
o ATI FireGL™ V3350
o ATI FireGL™ V3300
* ATI MultiView™ does not operate with Compiz environments
* ATI MultiView™ (released in 8.52/8.53) does not operate with Xinerama enabled
Last edited: