- Joined
- Dec 9, 2009
- Messages
- 646 (0.12/day)
- Location
- South East, United Kingdom
System Name | Swag |
---|---|
Processor | Intel Xeon E3110 4GHz |
Motherboard | GIGABYTE GA-G31M-ES2L |
Cooling | Scythe Infinity I Push-Pull w/ AS5 |
Memory | 2x2GB Transcend 800MHz DDR2 @ 890MHz 1.9v |
Video Card(s) | Palit nVIDIA GTX460 1GB 800/1600/2000 |
Storage | Crucial M4 64GB |
Display(s) | LG Flatron M1917TM 1280x1024 @ 60Hz |
Audio Device(s) | Realtek HD Audio |
Power Supply | OCZ StealthXStream 2 600W |
Software | Windows 7 Professional 64-bit |
Basically I have a lot a lot a lot of work to do over these next coming days and my PC has now decided to basically die for no reason
I took out one of my OCZ sticks to lend to someone so I only have one OCZ stick left now... but how the f*!% can that be the cause of the following problem!?
Okay so it will get to BIOS blah blah, can do all that... then when it gets to loading windows I see the blue XP bar for a split second and then the whole computer dies and restarts.
I know it's not the hard drive cos I tried another and the exact same thing happens, gets to the Windows XP loading screen for a milisecond and then dies.
I've cleared CMOS, set everythin back to standard etc, and replaced the OCZ stick with a Generic 512MB just to check it's not bad RAM and it still won't boot.
My PC has always been a twat and I'm used to it, but this is too far :| I really really need this thing to work, it's so freakin' important :|
Any suggestions or ideas!?
Thanks in advance :/
I took out one of my OCZ sticks to lend to someone so I only have one OCZ stick left now... but how the f*!% can that be the cause of the following problem!?
Okay so it will get to BIOS blah blah, can do all that... then when it gets to loading windows I see the blue XP bar for a split second and then the whole computer dies and restarts.
I know it's not the hard drive cos I tried another and the exact same thing happens, gets to the Windows XP loading screen for a milisecond and then dies.
I've cleared CMOS, set everythin back to standard etc, and replaced the OCZ stick with a Generic 512MB just to check it's not bad RAM and it still won't boot.
My PC has always been a twat and I'm used to it, but this is too far :| I really really need this thing to work, it's so freakin' important :|
Any suggestions or ideas!?
Thanks in advance :/