Catalyst 7.5 / 1440 x 900 issues...

Venomelite · Jun 2, 2007

Hey guys, not sure if this is widespread or not. My problem is that I cannot get 1440x900 to work with the catalyst 7.5s at all. I am running the following..

AMD Athlon X2 6000+
MSI K9A Platinum
4gigs Mushkin DDR2 800
2x1650Pros in Crossfire
650 watt Thermaltake Toughpower PSU
2x 160gig Segate SATA2 HDs on RAID 0
Sound Blaster xFi Xtreme Gamer Pro Fatality
16x Pioneer DVD ROM
18x LG Lightscribe Burner
Westinghouse LTV-19W3 through VGA

This only happeneds with the 7.5s, had to go back to 7.4 (when this happeneds my screen goes blank and says "out of range") when obviously it shouldn't be. Any help or even knowledge that everyone on this forum is aware of it would be appriciated =) thanks.

wazzledoozle · Jun 2, 2007

Vista or XP?

I'm running Cats 7.5 fine @ 1440x900 on Vista Business.

DaMulta · Jun 2, 2007

If you didn't stand to gain anything I would stay with 7.4 untill 7.6. If this a widespread proplem people will report on it.

You could try this. Go to your add remove programs and uninstall everything ATi then install the new 7.5 driver and CCC.

wazzledoozle · Jun 2, 2007

Also run driver cleaner in safe mode after uninstalling all the ATI software.

Venomelite · Jun 2, 2007

Thanks for the replies and sorry for forgetting the OS lol, I am running Windows Vista x64 Home Premium and I will also try your suggestions.

Venomelite · Jun 2, 2007

Well that still hasn't fixed my issue, upon reboot to login screen after an install it still says out of range. Running on 1280x960 atm, guess I will re-install 7.4s ><.

amd64best · Jun 2, 2007

I have the same problem with Catalyst 7.5
My system is
AMD64 3000+
ASUS A8N SLI Deluxe
Kington DDR400 512MB*2
Sapphire X1650XT
Windows XP SP2

When I install CCC 7.5 and restart. The window screen at resolution = 1440*900 was totally blank. The monitor said that no signal input.
But When I changed the resolution to 1024*728, its work.
In my opinion I think that is bug for Catalyst 7.5 with resolution = 1440*900 on windows XP.

Now I must use Catalyst 7.4 and wait until AMD release the new version.

wazzledoozle · Jun 2, 2007

Definitely a wide spread problem in the driver. Meh.

Wile E · Jun 2, 2007

Weird, I don't have the issue.

EDIT: Maybe you guys can try to uninstall your monitor driver using the Device Manager and then reboot, letting Windows reinstall the driver. I had some issues before that were solved in that manner.

flyaway31 · Jun 2, 2007

Venomelite said:
Hey guys, not sure if this is widespread or not. My problem is that I cannot get 1440x900 to work with the catalyst 7.5s at all. I am running the following..

AMD Athlon X2 6000+
MSI K9A Platinum
4gigs Mushkin DDR2 800
2x1650Pros in Crossfire
650 watt Thermaltake Toughpower PSU
2x 160gig Segate SATA2 HDs on RAID 0
Sound Blaster xFi Xtreme Gamer Pro Fatality
16x Pioneer DVD ROM
18x LG Lightscribe Burner
Westinghouse LTV-19W3 through VGA

This only happeneds with the 7.5s, had to go back to 7.4 (when this happeneds my screen goes blank and says "out of range") when obviously it shouldn't be. Any help or even knowledge that everyone on this forum is aware of it would be appriciated =) thanks.

I do not have this problem, but do have the following: when loading certain programs (not all) only 1/3 is shown and the rest remains as my desktop. That is with 7.5 upgrading from 6.x dated june 2006.

OP is XP with SP2, Acer 19W monitor, ATI X1600 AGP

Any suggestions to resolve this?

Thanks.

Venomelite · Jun 2, 2007

well glad to see I am not the only one with this issue, as for monitor drivers none exist for me since I am using an LCD TV it just uses default monitor on my dual x1650s, unless someone knows of a driver for westinghouse tvs/vista support at all?

EastCoasthandle · Jun 2, 2007

This appears to be a problem with that. It's best to submit a ticket with ATI and present a screenshot of the problem (via print screen key or camera). That way they understand what you are trying to say.

flyaway31 · Jun 2, 2007

EastCoasthandle said:
This appears to be a problem with that. It's best to submit a ticket with ATI and present a screenshot of the problem (via print screen key or camera). That way they understand what you are trying to say.

Yes, I have a ticket with ATI, but one never knows if a member here might have a solution.

Pepsiennis · Jun 2, 2007

Yeah, I had that problem, too. It seems to be that the Cat 7.5's are fighting with Vista when you try to change resolution via Display Properties. Thing to do is:

* If you're "locked out" with a black screen/no signal, reboot, hit F8 during boot to get the Boot Menu, and start up at the safe resolution (the 640x480). Once in Vista, change resolution to 1024x768. This is so the entire CCC window with buttons will be in view. Now you're ready...

1. First, set your resolution and frequency in CCC, then Apply, and OK.

2. Next, set the same resolution and frequency (the cause of my problem to begin with) in Display Properties.

I think the problem is with the frequency not agreeing in both places. Just let the Cat 7.5's have their way, by changing things via CCC, until 7.6 is out. Cheers!

Venomelite · Jun 2, 2007

If I remember correctly, no matter where i set my res weather it was from ccc or the display properties it would just black out. I think I will just wait, I dont want to do another re-install of the cats.. done like 5 already lol but thanks for the suggestion.

chiboy04 · Jun 3, 2007

same problem, 1440X900 60hz, no display. only happened in 7.5 driver. annyone fix this issue?
spec vista/XP
hd2900XT
AOC 193FW

{JNT}Raptor · Jun 3, 2007

X1950XTX 1440x900 60Hz Samsung 225BW LCD with Oblivion and Supreme Commander.....No Issues at all..........yet.

WarEagleAU · Jun 4, 2007

Im on the 7.5s using the Acer AL1917W LCD.
No issues yet aside from the install. came up with some missing file error or something like that.

CessBlue · Jun 4, 2007

I signed up to post a problem here relating to Catalyst 7.5.

My LCD is also widescreen (ViewSonic VA1912wb) and I'm running Vista 32-bit.

I can't seem to set my display to 1400x900 32bpp but I can do 1400x900 16bpp. And 16bpp is so ugly when you're running Vista. It's an odd little bug and I'm going back to 7.4 to get the option back.

almighty · Jun 4, 2007

I had the roughly the same problem, i installed the 7.5 drivers and when i rebooted it then set my display to a "unsuported resolution" i used the old 7.4 and everything was fine gain it auto set my display resolution to 1440x900. Im still using the old drivers. 7.5 does'nt detect my monitor properly it seems.

Zubasa · Jun 4, 2007

No issues as of yet, 1440*900 doing fine.
With my X1950Pro and BenQ FP92W LCD

wolfblitz1979 · Jun 4, 2007

I had similar problems on my Samsung SM940BW, plugging in my old 1280x1024 LCD I was able to test changes and the Samsung kept saying set to 1440x900 60Hz and nothing. Bumped up to 75Hz and same rez and all worked well!
Don't know if this will help anyone else at all, but figured it was worth posting

Manthas · Jun 5, 2007

Suggestion for the 1440x900 issue

OK, for those of you that are getting the "Out of range" (basically) message, I found the most bizarre thing on my system - I had to switch which DVI output my monitor was connected to from the 7.4 drivers to the 7.5.

Yes, I know it doesn't make any sense, but it has worked. The BIOS screen showed up fine, the Windows splash screen showed up fine, but the minute Windows started up and the driver started doing its thing, the monitor went into "Not Optimum Mode" operation.

So, if you're still having problems - try that; it's like the driver has logically redefined the primary and secondary DVI outputs. Why this would primarily manifest itself on those of us running 1440*900 displays, I'm not sure. Hell, I'm not sure why it would decide to go crazy like this in the first place.

If ATI (AMD) responds back to the ticket I opened with them, I'm going to mention this little tid bit to them as well.

jla0 · Jun 5, 2007

Same problem here. Cat 7.5 with Vista x64 Enterprise and Acer AL1916w. Can't do 1440x900.

This blows.

Kr0m · Jun 8, 2007

I too have this problem.
I first had it in WindowsXP which resulted in the previously mentioned issues. My monitor would just cycle in the power off/mode before it got the login screen.
I recently installed Vista Home Basic on a 2nd harddrive, which is dual booting fine. Downloaded the proper drivers for my system, rebooted and they installed fine. Since my resolution was still in 800x600, I went and changed it to 1440x900 then this is when I experience the same problem as I had in XP. My monitor cycles on/off.
Hardware:
Monitor: LG 194WTX (Digital)
Video Card: ATI Radeon x1650 Pro 512MB AGP
Motherboard: Asus P4P800S-X
HD0: WinXP
HD1: Vista Home Basic 32bit

(It's good to know others out there are having this same problem. Now I have the task of trying to get the 7.5s off of Vista and installing the 7.4s.)

Processor	X2 3800+ @ 2.3 GHz
Motherboard	DFI Lanparty SLI-DR
Cooling	Zalman CNPS 9500 LED
Memory	2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s)	HIS IceQ 4670 512Mb
Storage	640Gb & 160Gb western digital sata drives
Display(s)	Hanns G 19" widescreen LCD w/ DVI 5ms
Case	Thermaltake Soprano
Audio Device(s)	Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply	Coolermaster eXtreme Power Plus 500w
Software	XP Pro

System Name	Work in progress
Processor	AMD 955---4Ghz
Motherboard	MSi GD70
Cooling	OcZ Phase/water
Memory	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s)	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage	SSD 64GB
Display(s)	Envision 24'' 1920x1200
Case	Using the desk ATM
Audio Device(s)	Sucky onboard for now :(
Power Supply	1000W TruePower Quattro

Processor	X2 3800+ @ 2.3 GHz
Motherboard	DFI Lanparty SLI-DR
Cooling	Zalman CNPS 9500 LED
Memory	2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s)	HIS IceQ 4670 512Mb
Storage	640Gb & 160Gb western digital sata drives
Display(s)	Hanns G 19" widescreen LCD w/ DVI 5ms
Case	Thermaltake Soprano
Audio Device(s)	Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply	Coolermaster eXtreme Power Plus 500w
Software	XP Pro

Processor	X2 3800+ @ 2.3 GHz
Motherboard	DFI Lanparty SLI-DR
Cooling	Zalman CNPS 9500 LED
Memory	2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s)	HIS IceQ 4670 512Mb
Storage	640Gb & 160Gb western digital sata drives
Display(s)	Hanns G 19" widescreen LCD w/ DVI 5ms
Case	Thermaltake Soprano
Audio Device(s)	Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply	Coolermaster eXtreme Power Plus 500w
Software	XP Pro

System Name	The ClusterF**k
Processor	980X @ 4Ghz
Motherboard	Gigabyte GA-EX58-UD5 BIOS F12
Cooling	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s)	Evga GTX 580
Storage	Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s)	HP LP2475w 24" 1920x1200 IPS
Case	Technofront Bench Station
Audio Device(s)	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software	Win7 Ultimate N x64, OSX 10.8.4

Processor	Intel 3.0
Memory	2 Gb
Video Card(s)	ATI X1600 AGP 512Mb
Display(s)	Acer 19" wide
Software	XP professional with SP 2

System Name	MY PC
Processor	E8400 @ 3.80Ghz > Q9650 3.60Ghz
Motherboard	Maximus Formula
Cooling	D5, 7/16" ID Tubing, Maze4 with Fuzion CPU WB
Memory	XMS 8500C5D @ 1066MHz
Video Card(s)	HD 2900 XT 858/900 to 4870 to 5870 (Keep Vreg area clean)
Storage	2
Display(s)	24"
Case	P180
Audio Device(s)	X-fi Plantinum
Power Supply	Silencer 750
Software	XP Pro SP3 to Windows 7
Benchmark Scores	This varies from one driver to another.

Processor	AMD Phenom 9600
Motherboard	Gigabyte GA-MA790FX-DQ6
Cooling	Zalman 9700LED
Memory	Patriot 2x1GB DDR2-1066
Video Card(s)	Sapphire ATI HD3870
Storage	2x Seagate 320GB in RAID 0
Display(s)	Viewsonic VX2235wm
Case	Thermaltake Armor
Audio Device(s)	Creative X-Fi
Power Supply	Thermaltake Thoughpower 700w
Software	Windows Vista 64-bit

Processor	E6600
Motherboard	MSI 975X Power-Up Ed.
Cooling	Tuniq
Memory	Mushkin HP 2GB DDR2 900
Video Card(s)	Gecube HD 2900XT
Storage	320, 2x 250, 2x 160
Display(s)	AOC 193FW
Case	Lian-LI V1000B+
Audio Device(s)	Realtek onboard
Power Supply	750W silverston Decathlon
Software	XP/Vista

System Name	Ummmm...Mine
Processor	I7 920 @ 4.2ghz @ 1.29v's load
Motherboard	ASUS P6T Deluxe V2
Cooling	Custom 1/2 inch H20
Memory	3x2gb Patriot Sector 7 @2008Mhz 27-9-11-9 1T
Video Card(s)	EVGA GTX 580 SC 900/1800/1090
Storage	1-Mushkin 60gb SSD 1-500GB WD Black and 2-1TB 32mb WD Black
Display(s)	25 inch Hanns-G 2ms
Case	Custom
Audio Device(s)	Turtle Beach Catalina
Power Supply	Corsair AX850 Pro Series-Modular
Software	All Kinds...and then some.
Benchmark Scores	3dMark 11 P7066 Compare Link- http://3dmark.com/3dm11/251153

System Name	Pandemic 2020
Processor	AMD Ryzen 5 "Gen 2" 2600X
Motherboard	AsRock X470 Killer Promontory
Cooling	CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory	32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s)	ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage	WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s)	ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case	Fractal Define R6 C
Audio Device(s)	Realtek 5.1 Onboard
Power Supply	Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse	Razer Death Adder
Keyboard	Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software	Windows 10 Pro x64

Processor	Pentium 4 @ 3ghz :'(
Motherboard	Foxconn 661FX4MR-ES
Cooling	3x12cm fans, 1xcm and the stock CPU and GPU coolers
Memory	2gig of DDR1
Video Card(s)	X 1960 PRO AGP @ stock speeds
Storage	1x samsung 120gig
Display(s)	HP W19 19" widescreen
Case	?
Audio Device(s)	built in to mobo
Power Supply	Trust 570watt
Software	XP Service pack 2

Processor	Core i7-12700k
Motherboard	Z690 Aero G D4
Cooling	Custom loop water, 3x 420 Rad
Video Card(s)	RX 7900 XTX Phantom Gaming
Storage	Plextor M10P 2TB
Display(s)	InnoCN 27M2V
Case	Thermaltake Level 20 XT
Audio Device(s)	Soundblaster AE-5 Plus
Power Supply	FSP Aurum PT 1200W
Software	Windows 11 Pro 64-bit

Processor	Intel Core i7 3770k (Stock clocks)
Motherboard	MSI Z77A-GD55
Cooling	Corsair H80i CPU cooler, 3x 120mm led case fans, 140mm fan
Memory	Corsair Vengeance Back 16GB (2x8GB) DDR3 C9 1600MHz Dual Channel
Video Card(s)	EVGA Geforce GTX 980 Ti FTW 6GB
Storage	120GB Kingston HyperX SSD. 2 1TB/1 500GB HDD SATA
Display(s)	BenQ XL2420G G-Sync/Acer CB240HY IPS
Case	Antec Dark Fleet Series DF30
Audio Device(s)	Asus Xonar Xense (PCIe) + Logitech Z-5500 5.1 Speakers
Power Supply	Antec Signature 850 W
Mouse	Logitech G502 Spectrum
Keyboard	Logitech G710+
Software	Microsoft Windows 10 Pro x64

Catalyst 7.5 / 1440 x 900 issues...

New Member

New Member

My stars went supernova

New Member

New Member

New Member

New Member

New Member

Power User

New Member

Attachments

New Member

New Member

New Member

New Member

New Member

New Member

Bird of Prey

New Member

New Member

New Member

New Member

New Member