kenjin
New Member
- Joined
- Nov 23, 2005
- Messages
- 182 (0.03/day)
Processor | Intel Core I7 930 @3.8ghz |
---|---|
Motherboard | GIgabyte UDR3 |
Cooling | Zalman 9700 |
Memory | G.Skill PI series 3x2GB |
Video Card(s) | PowerColor 6950 2GB Mod with 6970Bio + Sapphire 6950 OC edition |
Storage | 3x Western Digital 150GB Raptor Raid 5 |
Display(s) | Toshiba 32inch wide screen LCD |
Case | Rosewill Armor Gaming ATX |
Audio Device(s) | Onboard sound |
Power Supply | Antec Truepower 700W 80%+ |
Software | Window 7 Pro 64bit |
ok.... here it is.. nothing special about it, but just wanted to post up and share with everyone for what i got to with the parts i have.maybe it can go higher if this was OC by a intel Expert.
I know my CPU is very low for overclock but some how i just cant get pass 1300mhz and inorder to run 1300mhz FSB i have to raise the Vcore + 0.2000 imo with 100mhz more is not worth it, so i stayed as 1280fsb anything beyong 1300 FSB i will freeze in window or not booting up.
I tried raise the NB voltage more but if i set voltage anything higher then 1.40volt my PC wont boot up and i have to clear Cmos to reset the bios.
as for memory so far thats the highest timming i got to. i might try to tight the timming more if i got more time. but this is the best i got so far.
i have the latest bio update from Foxconn for the mobo i got, and i seen people getting way higher clock then what i have. im not sure why is the voltage wont go over 1.4volt i might have to contact the support to find out why...
Settings i use are
CPU memory FSB ratio i set to manual and put in my own speed.
Vanderpool technology disable
C1E disable
Speedstep disable
Nvidia linkboost disable
hyper transport i left it at Default valune of 400 with 8 and 8
SLI memory feature i set it to expert.
if you guys got any other suggestions please let me know I would love to get my CPU higher then 2.88ghz speed.
I know my CPU is very low for overclock but some how i just cant get pass 1300mhz and inorder to run 1300mhz FSB i have to raise the Vcore + 0.2000 imo with 100mhz more is not worth it, so i stayed as 1280fsb anything beyong 1300 FSB i will freeze in window or not booting up.
I tried raise the NB voltage more but if i set voltage anything higher then 1.40volt my PC wont boot up and i have to clear Cmos to reset the bios.
as for memory so far thats the highest timming i got to. i might try to tight the timming more if i got more time. but this is the best i got so far.
i have the latest bio update from Foxconn for the mobo i got, and i seen people getting way higher clock then what i have. im not sure why is the voltage wont go over 1.4volt i might have to contact the support to find out why...
Settings i use are
CPU memory FSB ratio i set to manual and put in my own speed.
Vanderpool technology disable
C1E disable
Speedstep disable
Nvidia linkboost disable
hyper transport i left it at Default valune of 400 with 8 and 8
SLI memory feature i set it to expert.
if you guys got any other suggestions please let me know I would love to get my CPU higher then 2.88ghz speed.
Last edited: