cdawall
where the hell are my stars
- Joined
- Jul 23, 2006
- Messages
- 27,680 (4.27/day)
- Location
- Houston
| System Name | All the cores |
|---|---|
| Processor | 2990WX |
| Motherboard | Asrock X399M |
| Cooling | CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL |
| Memory | 4x16GB G.Skill 3600 |
| Video Card(s) | (2) EVGA SC BLACK 1080Ti's |
| Storage | 2x Samsung SM951 512GB, Samsung PM961 512GB |
| Display(s) | Dell UP2414Q 3840X2160@60hz |
| Case | Caselabs Mercury S5+pedestal |
| Audio Device(s) | Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood |
| Power Supply | Seasonic Prime 1200w |
| Mouse | Thermaltake Theron, Steam controller |
| Keyboard | Keychron K8 |
| Software | W10P |
Step 1-getting ahold of your BIOS
Step 3-saving your BIOS
Step 4-flashing your BIOS
Step 5-repeat
Get a copy of your BIOS off of your VGA card, you can do this using ATiWinflash available here
To do so get ATiWinflash running select "Save"
Then save the BIOS as something simple like cardname_stock or oc_BIOS.rom
Step 2-Moding your BIOSTo do so get ATiWinflash running select "Save"
Then save the BIOS as something simple like cardname_stock or oc_BIOS.rom
Now modify your BIOS thru RBE BIOS editor available here
Start by loading the image (load button is in the bottom left corner)
now you should have a screen like this:
notice how its has a checkmark in the box labeled pre-modified by RBE thats because i already modded this BIOS to 700/900 to do that select the "clock settings" tab
now if you want to improve your 3D clocks change the settings in the State 2 - mode 3 - "high 3D" column. Set this to your max stable clocks. Mine are currently 700/900 due to lack of power 2x3850s on a 500w Tt is a no go :ROTF:
if you want to adjust the volts and increase them for this card go to the voltages (still in the same column) now you want to set this to 1.327
Start by loading the image (load button is in the bottom left corner)
now you should have a screen like this:
notice how its has a checkmark in the box labeled pre-modified by RBE thats because i already modded this BIOS to 700/900 to do that select the "clock settings" tab
now if you want to improve your 3D clocks change the settings in the State 2 - mode 3 - "high 3D" column. Set this to your max stable clocks. Mine are currently 700/900 due to lack of power 2x3850s on a 500w Tt is a no go :ROTF:
if you want to adjust the volts and increase them for this card go to the voltages (still in the same column) now you want to set this to 1.327
Step 3-saving your BIOS
Now to save you will simply have to select save in the bottom left corner
To name it i recommend something like cardname_OC_clock speeds-volts.rom
To name it i recommend something like cardname_OC_clock speeds-volts.rom
Step 4-flashing your BIOS
To do this go back into AtiWinflash and select "load image"
select the BIOS you just modified, check to make sure the correct card is select and click program
once its done you will get this screen hit ok the click yes or no to restart
select the BIOS you just modified, check to make sure the correct card is select and click program
once its done you will get this screen hit ok the click yes or no to restart
Step 5-repeat
repeat for as many cards as you have
