• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Radeon HD 4850 Voltmods

Joined
Jun 29, 2006
Messages
230 (0.04/day)
wizzard, is the smd capacitor that you are showing on the vgpu voltage mod ground?
 
Last edited:
Joined
Aug 22, 2007
Messages
3,450 (0.57/day)
Location
CA, US
System Name :)
Processor Intel 13700k
Motherboard Gigabyte z790 UD AC
Cooling Noctua NH-D15
Memory 64GB GSKILL DDR5
Video Card(s) Gigabyte RTX 4090 Gaming OC
Storage 960GB Optane 905P U.2 SSD + 4TB PCIe4 U.2 SSD
Display(s) Alienware AW3423DW 175Hz QD-OLED + Nixeus 27" IPS 1440p 144Hz
Case Fractal Design Torrent
Audio Device(s) MOTU M4 - JBL 305P MKII w/2x JL Audio 10 Sealed --- X-Fi Titanium HD - Presonus Eris E5 - JBL 4412
Power Supply Silverstone 1000W
Mouse Roccat Kain 122 AIMO
Keyboard KBD67 Lite / Mammoth75
VR HMD Reverb G2 V2
Software Win 11 Pro
thx
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
How are the overclocking results with these mods? Does it help the poor overclocking issues any?
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
26,958 (3.71/day)
Processor Ryzen 7 5700X
Memory 48 GB
Video Card(s) RTX 4080
Storage 2x HDD RAID 1, 3x M.2 NVMe
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
the big yellow cap on the left side of the vgpu mod is gnd
 
Joined
Jun 30, 2008
Messages
212 (0.04/day)
Location
Sweden
System Name Shadow Warrior
Processor 7800x3d
Motherboard Gigabyte X670 Gaming X AX
Cooling Thermalright Peerless Assassin 120 SE ARGB White
Memory 64GB 6000Mhz cl30
Video Card(s) XFX 7900XT
Storage 12TB NVME + 16TB SSD + 2x12TB 5400rpm
Display(s) HP X34 Ultrawide 165hz
Case Fractal Design Define 7 (modded)
Audio Device(s) Sound BlasterX AE-5+ / Topping DX5 Lite (Dan Clark Audio Aeon2 closed)
Power Supply Corsair hx1000i
Mouse Roccat Kain 120 aimo / Roccat Burst Pro
Keyboard Cherry Stream 3.0 SX-switches
VR HMD Quest 1, Pico 4 128GB
Software Win11 x64
I'm thinking about doing the pencil mod (for the first time since the days of Duron)
I'd like to have a bit more information if possible.

1. What kind of pen to use?
2. How much do you shade with the pen?
2.5 As I've understood the more shade the less resistance and thus higher voltage. Correct?
3. Do I need a Digital Multimeter to measure the VDC+resistance (I'd rather not at all)
4. Do I need to download a new firmware to the card? If so, then where? (Ordered a Sapphire 4850)

Thank you for your hard work :)
 

calvary1980

New Member
Joined
Dec 26, 2007
Messages
1,801 (0.30/day)
Location
Toronto, CA
Processor Intel Core 2 Quad Q6600 Kentsfield L724A629 @ 3.8Ghz 423x9 1.47v
Motherboard Abit IP-35 Pro Beta 16.B04 (vDroop)
Cooling 6x Scythe S-Flex SFF21F, EK Multi Option 2 Port, dB-1 Compact, Swiftech MCR80, Swiftech Apogee GT
Memory 2x1 OCZ Flex XLC PC-9200 @ 5-5-5-18 1220 2.3v
Video Card(s) Inno3D Geforce 8800GTS 320
Storage Western Digital Raptor X 150
Display(s) Samsung Syncmaster 226BW 22"
Case Cooler Master RC-690
Audio Device(s) Creative SoundBlaster X-Fi Xtreme Gamer 7.1
Power Supply Thermaltake ToughPower 1000
#2 pencil and a multimeter.

- Christine
 
Joined
Jun 30, 2008
Messages
212 (0.04/day)
Location
Sweden
System Name Shadow Warrior
Processor 7800x3d
Motherboard Gigabyte X670 Gaming X AX
Cooling Thermalright Peerless Assassin 120 SE ARGB White
Memory 64GB 6000Mhz cl30
Video Card(s) XFX 7900XT
Storage 12TB NVME + 16TB SSD + 2x12TB 5400rpm
Display(s) HP X34 Ultrawide 165hz
Case Fractal Design Define 7 (modded)
Audio Device(s) Sound BlasterX AE-5+ / Topping DX5 Lite (Dan Clark Audio Aeon2 closed)
Power Supply Corsair hx1000i
Mouse Roccat Kain 120 aimo / Roccat Burst Pro
Keyboard Cherry Stream 3.0 SX-switches
VR HMD Quest 1, Pico 4 128GB
Software Win11 x64
Thanks for the replies. I guess I have to chicken out then... :(
 

scamps

New Member
Joined
Oct 24, 2006
Messages
29 (0.00/day)
Thank you, W1zzard!

Is there already any software to manipulate the VGPU under Windows when I have done this Voltmod? Or is it necessary to flash the bios for each alteration?
 

ViciousXUSMC

New Member
Joined
Jul 4, 2008
Messages
117 (0.02/day)
System Name Vicious's Rig
Processor Q6600 @ 3.6ghz @ 1.4v (Windows)
Motherboard Asus P5Q Deluxe
Cooling Thermalright Ultra 120 Extrme with S-Scyth fan
Memory 2x2gb Mushkin DDR2 800
Video Card(s) 2x Visiontek 4850 @ 675/1000
Storage 2x 640gb Western Digital
Display(s) 37" Westinghouse LVM37-W3
Case Antec P182 Special Edition
Audio Device(s) X-Fi Xtreme Music
Power Supply PC Power & Cooling 750w Silencer
Software Windows Vista x64 Ultimate
Benchmark Scores 3dmark06 18,582
Just connect the two solder dots the pencil point is pointing at to short that out? Seems easy enough, but was wondering why only one picture actually shows a line drawn between the points? I guess it has something to do with the "paint"?

Anyways wonderful guide!
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
26,958 (3.71/day)
Processor Ryzen 7 5700X
Memory 48 GB
Video Card(s) RTX 4080
Storage 2x HDD RAID 1, 3x M.2 NVMe
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
the line in the picture is to clarify that you have to pencil between the points across the pcb. usually you pencil on a component like a resistor
 

ViciousXUSMC

New Member
Joined
Jul 4, 2008
Messages
117 (0.02/day)
System Name Vicious's Rig
Processor Q6600 @ 3.6ghz @ 1.4v (Windows)
Motherboard Asus P5Q Deluxe
Cooling Thermalright Ultra 120 Extrme with S-Scyth fan
Memory 2x2gb Mushkin DDR2 800
Video Card(s) 2x Visiontek 4850 @ 675/1000
Storage 2x 640gb Western Digital
Display(s) 37" Westinghouse LVM37-W3
Case Antec P182 Special Edition
Audio Device(s) X-Fi Xtreme Music
Power Supply PC Power & Cooling 750w Silencer
Software Windows Vista x64 Ultimate
Benchmark Scores 3dmark06 18,582
Thats what I thought, thanks for clerifing.

Im dead in the water right now with both my 4850's I think a bad bios flash, or corrupted drivers. O a combo of both the bios flash made the drivers go fubar.
 
D

DavyGT

Guest
I know that this is an ubernoob question, but how do I measure the VGPU voltage? I'm guessing it doesn't matter where the + and - leads go, just at one any one of the points. Am I correct?
Can someone also post some benches of their new overclocks as well?
 

ShadowFold

New Member
Joined
Dec 23, 2007
Messages
16,918 (2.85/day)
Location
Omaha, NE
System Name The ShadowFold Draconis (Ordering soon)
Processor AMD Phenom II X6 1055T 2.8ghz
Motherboard ASUS M4A87TD EVO AM3 AMD 870
Cooling Stock
Memory Kingston ValueRAM 4GB DDR3-1333
Video Card(s) XFX ATi Radeon HD 5850 1gb
Storage Western Digital 640gb
Display(s) Acer 21.5" 5ms Full HD 1920x1080P
Case Antec Nine-Hundred
Audio Device(s) Onboard + Creative "Fatal1ty" Headset
Power Supply Antec Earthwatts 650w
Software Windows 7 Home Premium 64bit
Benchmark Scores -❶-❸-❸-❼-
What kind of pencil would I need to do a pencil mod?
 
D

DavyGT

Guest
What kind of pencil would I need to do a pencil mod?

A good 2B or 4B pencil. I used my Faber Castell 2B pencil. Strangely enough, my 4B pencil doesn't decrease resistance at all, only adds to it, so always have an alternative at hand.
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
26,958 (3.71/day)
Processor Ryzen 7 5700X
Memory 48 GB
Video Card(s) RTX 4080
Storage 2x HDD RAID 1, 3x M.2 NVMe
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
I know that this is an ubernoob question, but how do I measure the VGPU voltage? I'm guessing it doesn't matter where the + and - leads go, just at one any one of the points. Am I correct?
Can someone also post some benches of their new overclocks as well?

you put the red probe to the measure point and the black probe to any ground which could be case metal, molex connector black cable, pcie power plug gnd or a million other spots. the grounds are all connected with each other
 
Joined
Jun 29, 2006
Messages
230 (0.04/day)
another uber noob question: how much wattage for the resistor? i found various 100k ohm variable resistors, but they come in different wattages.
 
Joined
Jun 20, 2008
Messages
2,859 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 5 5600X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 6700 XT
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Any ideas on how long the pencil would stay on there for once modded? Never done this before and don't want to have to keep applying every two weeks, thanks.
 
Joined
Jun 20, 2008
Messages
2,859 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 5 5600X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 6700 XT
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
so for that first pencil mod are we putting it on top of that one already filled or the empty one next to it?
 
Joined
Jun 20, 2008
Messages
2,859 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 5 5600X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 6700 XT
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
no worries, all sorted. Now at 790/1180 stable :) £117 quid well spent
 

yanahs

New Member
Joined
Jul 23, 2008
Messages
21 (0.00/day)
Processor Intel E8400 @ 3.99ghz @1.376v
Motherboard DFI Lanparty Dark X38 T2R
Cooling Noctua NH-U12P Push Pull Fan
Memory Team Extreem Dark 2x1gb pc8500
Video Card(s) HIS hd 4850 @ 800/1100 Accelero S1 Cooler
Storage Seagate 160gb SataII
Display(s) Hanspree New York 19"
Power Supply Blue Storm II 500w
hi guys.. quick question if I use the first pencil mod.. which only alows 1.4 volts (no more).. does that mean i can actually just pencil as much as I want without worrying overvoltage? (no need a dmm)?
 
Joined
Jan 5, 2008
Messages
152 (0.03/day)
Processor Intel Core i7-975 @ 4.4 GHz
Motherboard ASUS Rampage III GENE
Cooling Noctua NH-D14
Memory 3x4 GB GeIL Enhance Plus 1750 MHz CL 9
Video Card(s) ASUS Radeon HD 7970 3 GB
Storage Samsung F2 500 GB
Display(s) Samsung SyncMaster 2243LNX
Case Antec Twelve Hundred V3
Audio Device(s) VIA VT2020
Power Supply Enermax Platimax 1000 W Special OC Edition
Software Microsoft Windows 7 Ultimate SP1
Yes, I think you can't kill your card with the first pencil mod, but everything depends on your cooling. If you have a good aftermarket cooler, you don't have to worry about anything. But if I were you, I wouldn't do this without DMM.
 

yanahs

New Member
Joined
Jul 23, 2008
Messages
21 (0.00/day)
Processor Intel E8400 @ 3.99ghz @1.376v
Motherboard DFI Lanparty Dark X38 T2R
Cooling Noctua NH-U12P Push Pull Fan
Memory Team Extreem Dark 2x1gb pc8500
Video Card(s) HIS hd 4850 @ 800/1100 Accelero S1 Cooler
Storage Seagate 160gb SataII
Display(s) Hanspree New York 19"
Power Supply Blue Storm II 500w
I got an accelero on it and i get 38 ide 45 load.. what do you think sufficient?
 
Joined
Jan 5, 2008
Messages
152 (0.03/day)
Processor Intel Core i7-975 @ 4.4 GHz
Motherboard ASUS Rampage III GENE
Cooling Noctua NH-D14
Memory 3x4 GB GeIL Enhance Plus 1750 MHz CL 9
Video Card(s) ASUS Radeon HD 7970 3 GB
Storage Samsung F2 500 GB
Display(s) Samsung SyncMaster 2243LNX
Case Antec Twelve Hundred V3
Audio Device(s) VIA VT2020
Power Supply Enermax Platimax 1000 W Special OC Edition
Software Microsoft Windows 7 Ultimate SP1
If you have Accelero S1 on it, then you can try that pencil mod. But remember to check temperatures all the time, especially #2.
 
Top