- Joined
- Mar 26, 2008
- Messages
- 1,877 (0.32/day)
- Location
- Cobourg,Ontario
System Name | RyZen FX |
---|---|
Processor | AMD Ryzen 9 5900x |
Motherboard | Gigabyte B550 Aorus Elite AX V2 |
Cooling | DeepCool AK400 Zero Dark Plus |
Memory | Corsair CMK32GX4M2E3200C16 X2 32gig dual channel |
Video Card(s) | ASUS RX 7700XT TUF OC |
Storage | x2 Lexar SSD NM710 2TB 2XSeagate 1Terrabyte 1x Seagate 2 Terrabyte |
Display(s) | 40 Inch Samsung HDTV (monitor) |
Case | HAF-X:) |
Audio Device(s) | AMD/HDMI to Onkyo HT-R508 Receiver |
Power Supply | EVGA SuperNOVA 1000 G2 Power Supply |
Software | Windows 10 Pro X64 |
Ok I see alot of these post recently and I have found a way to use Winflash to BIOS Flash.
First down load winflash
http://www.techpowerup.com/downloads/1122/Winflash_2.0.1.2.html
Now extract it to say C:\WINFLASH also your bios files should be in here,rename the asus file to 4870_TOP.BIN .
Now copy paste this into your notepad
@Echo Please wait while I'm trying to flash your Video Card...Thanks!
atiwinflash -f -p 0 4870_TOP.BIN
now click SAVE AS and put this TOP.BAT ,Bat files run from the dos command prompt.Make sure you save to the folder c:\winflash.When done click the bat file and it should start flashing the card for you.Wait until it pops up saying flashing complete and give a window on what was changed then reboot if only ONE card.For two cards you need to run the second bat file with the text below then reboot when BOTH cards are flashed.I hope this makes it easy for guys to do this.
Use the bottom section here if you have 2 cards in crossfire....Same as above method.
for the second card try this
atiwinflash -f -p 1 4870_TOP.BIN
0= your first card
1= second card
Ok now that we have your cards flashed,Time to get some fancontrol from ASUS .
ftp://ftp.asus.com.tw/pub/ASUS/vga/app/
Download SmartDoctor 5.23 this is the fan control program but you also need the GAMER_OSD from the same link.If you have WINXP try this link for the gamer_OSD
ftp://ftp.asus.com.tw/pub/ASUS/vga/GamerOSD/
First down load winflash
http://www.techpowerup.com/downloads/1122/Winflash_2.0.1.2.html
Now extract it to say C:\WINFLASH also your bios files should be in here,rename the asus file to 4870_TOP.BIN .
Now copy paste this into your notepad
@Echo Please wait while I'm trying to flash your Video Card...Thanks!
atiwinflash -f -p 0 4870_TOP.BIN
now click SAVE AS and put this TOP.BAT ,Bat files run from the dos command prompt.Make sure you save to the folder c:\winflash.When done click the bat file and it should start flashing the card for you.Wait until it pops up saying flashing complete and give a window on what was changed then reboot if only ONE card.For two cards you need to run the second bat file with the text below then reboot when BOTH cards are flashed.I hope this makes it easy for guys to do this.
Use the bottom section here if you have 2 cards in crossfire....Same as above method.
for the second card try this
atiwinflash -f -p 1 4870_TOP.BIN
0= your first card
1= second card
Ok now that we have your cards flashed,Time to get some fancontrol from ASUS .
ftp://ftp.asus.com.tw/pub/ASUS/vga/app/
Download SmartDoctor 5.23 this is the fan control program but you also need the GAMER_OSD from the same link.If you have WINXP try this link for the gamer_OSD
ftp://ftp.asus.com.tw/pub/ASUS/vga/GamerOSD/
Last edited: