a little chipped part from VGA board !!!

Lazzer408 · Nov 9, 2009

-slap-

If it doesn't work at stock clocks, what makes you think pushing it would help any?

Geofrancis · Nov 9, 2009

Beny-Nvidia said:
A question ...
Please Dont Hit me ...
Can I Overclock the VGA ?! :-s

im pretty sure you can do it from the nvidea control panel.

Beny-Nvidia · Nov 9, 2009

im pretty sure you can do it from the nvidea control panel.

im sure i can do it from RIVA TUNER ...
but after this situation ... what do u prefer ?

joinmeindeath417 · Nov 9, 2009

i wouldn't personally

Beny-Nvidia · Nov 9, 2009

Devil whispers in my ears

what do i do !?

joinmeindeath417 · Nov 9, 2009

I'd keep everything the way it is if your PC is working honestly man you think people here are going to keep trying to help you if you do not listen to them?

Don't become the boy who cried wolf..

Beny-Nvidia · Nov 10, 2009

ok Thanks Again ... i Owe you ...

Geofrancis · Nov 10, 2009

joinmeindeath417 said:
I'd keep everything the way it is if your PC is working honestly man you think people here are going to keep trying to help you if you do not listen to them?

Don't become the boy who cried wolf..

unless your running a massive overclock on the graphics card you wont notice the difference.

Beny-Nvidia · Nov 12, 2009

i have my rams on their Defaults ...
Set Manually on 800 / 4-4-4-12 / 2.1 Voltage
i got artifact ,again !
i got my rams 2 years ago and after two years i got another two sticks, they're same model, same timing, but not same chip, and i think not Same Voltage !
with my old ones, i have to set the ferqs and timings and voltages manually to their native but in new two they re at native in bios default setting !

what do i do ?! got new rams ?! i scare if im not correct about ram and the problem is coming from VGA

(( oh my god ...

(

Geofrancis · Nov 13, 2009

Beny-Nvidia said:
i have my rams on their Defaults ...
Set Manually on 800 / 4-4-4-12 / 2.1 Voltage
i got artifact ,again !
i got my rams 2 years ago and after two years i got another two sticks, they're same model, same timing, but not same chip, and i think not Same Voltage !
with my old ones, i have to set the frequency, timings and voltages manually to their native but in new two they re at native in bios default setting !

what do i do ?! got new rams ?! i scare if im not correct about ram and the problem is coming from VGA (( oh my god ... (

underclock your ram to see if the artifacting goes away to 6-6-6-18 @400mhz if it still artifacts then try the sticks individually to see if you can identify the faulty ram stick

Beny-Nvidia · Nov 13, 2009

the problem is that when i put the bios on its default setting two of rams are working with 667 and another two are working in 800 !
i cant try the rams individually because i dont know what to do to make the artifacts ! i got solved my VGA problem one week ago and i had not any artifacts til yesterday ! so i cant be sure with trying rams individually !

as i said before the RAMS voltages have 0.5 difference in their Native Ferquency !

Beny-Nvidia · Nov 13, 2009

i sat the ram Ferq at Auto / voltage Auto / timing Auto and i got this and its ok for now ! its better i sell my rams !

what do u prefer for two stick of 2 gb rams ?! G-Skill ?!

take a look :

http://img3.tinypic.info/files/6jssulh5q7qe9oclab64.gif

Beny-Nvidia · Nov 13, 2009

Hello !
Today i got the COD : MW 2 and when i was playing it at the loading scene i got old known artifacts again ! and i tought its rams ...
i plugged out two of my rams and tried with two old ...
it was good, so i restarted the system and tried Other Two and i got the artifacts again !

i tought that i found the Faulty rams ...

i put them off and plugged in two old rams and restarted the system and i had artifacts again !

(all was on the Bios default Setting)

so i got my brothers rams and tried them and i found out the PROBLEM is my VGA ...

i should have thought about this because i tried my VGA on my friends System and was getting the ARtifacts (before sending it to RMA) !

what can i do with this Crap VGA ?! can it be fixed or i just can throw it out of my window ?

Geofrancis · Nov 13, 2009

Beny-Nvidia said:
Hello !
Today i got the COD : MW 2 and when i was playing it at the loading scene i got old known artifacts again ! and i tought its rams ...
i plugged out two of my rams and tried with two old ...
it was good, so i restarted the system and tried Other Two and i got the artifacts again !

i tought that i found the Faulty rams ...

i put them off and plugged in two old rams and restarted the system and i had artifacts again !

(all was on the Bios default Setting)

so i got my brothers rams and tried them and i found out the PROBLEM is my VGA ...

i should have thought about this because i tried my VGA on my friends System and was getting the ARtifacts (before sending it to RMA) !

what can i do with this Crap VGA ?! can it be fixed or i just can throw it out of my window ?

try underclocking the graphics card core and ram. i have found if it is the core of the graphics card that is unstable it will ususaly crash the computer and if its the ram then the screen will artifact. so underclock the ram and the core to see if it helps. if it doesnt then your pretty much screwed.

joinmeindeath417 · Nov 13, 2009

toss it man. or try getting an actual replacement from ASUS

Beny-Nvidia · Nov 13, 2009

ASUS wont give me anything ! because its garranty label is taken off and printed VOID instead of it !

how much i should Underclock ?! i can not underclock because i dont have any driver ! the ferq 575-900

i just can replace the BIOS ! and now i have not any floppy drives ! can u just make an ISO with nero using your bootable floppy drive and upload this tiny file for me !?! (it should be 2 mb)

Solaris17 · Nov 13, 2009

Beny-Nvidia said:
ASUS wont give me anything ! because its garranty label is taken off and printed VOID instead of it !

how much i should Underclock ?! i can not underclock because i dont have any driver ! the ferq 575-900

i just can replace the BIOS ! and now i have not any floppy drives ! can u just make an ISO with nero using your bootable floppy drive and upload this tiny file for me !?! (it should be 2 mb)

if you passed furmark and asus tested the card their is nothing wrong with it drop your ram down and loosen the timings.

joinmeindeath417 · Nov 13, 2009

Solaris17 said:
if you passed furmark and asus tested the card their is nothing wrong with it drop your ram down and loosen the timings.

I agree, but he is saying when he takes his personal card and puts it in a friends PC it still artifacts the same way. isn't that a bit odd that it'd still be the ram?

Solaris17 · Nov 14, 2009

joinmeindeath417 said:
I agree, but he is saying when he takes his personal card and puts it in a friends PC it still artifacts the same way. isn't that a bit odd that it'd still be the ram?

did he say that? hmm must have missed it. the last impression i got was it works fine..but everytime i play with my ram i artifact. in which case its time to call asus if it does it in your buds rig....just dont tell them about the previous return if they give you trouble.

Beny-Nvidia · Nov 14, 2009

just dont tell them about the previous return if they give you trouble.

the label is taken off and written A BIG VOID !

i tried new rams but still have the problem.

i tried the VGA another place and i had the artifacts,

i think the VGA has a big problem and i dont know what is this !

P.S:
how much i do the decreasing from 575-900 ?!

is this good ?! 500-800 ?! i wanna replace a bios with this ferq ...

Beny-Nvidia · Nov 14, 2009

hey boys ....
i stopped the fan and the temprature went on 120 and the artifacts were gone !

whats the problem ?

Solaris17 · Nov 14, 2009

the card is dead.

Beny-Nvidia · Nov 14, 2009

but i think its in COMA !
why does it revieve when i HEAT it ?!

can it be fixed BY ASUS ?!

Solaris17 · Nov 15, 2009

Beny-Nvidia said:
but i think its in COMA !
why does it revieve when i HEAT it ?!

can it be fixed BY ASUS ?!

it might revive because their is some sort of solder problem and it gets hot enough to fix some sort of connection issue. or it could be that the driver reboots and loads low clocks. in either case it isnt somethin id honestly try at home if you ever wanted to return it. as you would absolutely void the warentee after such an attempt.

Processor	i7 2600k@4.6ghz
Motherboard	MSI z68ma-ed55
Cooling	Silentx Extreem 120mm
Memory	2x4gb XMS 7-8-7-20 1600
Video Card(s)	HD6870
Storage	2x128gb Kingston Hyper-X (Raid0), 2x750gb RE3 (RAID1), 2x750gb RE3 (RAID1)
Display(s)	Soyo 24", Gateway 22"
Case	Fractal Design Arc Mini 6x120mm fans.
Audio Device(s)	Onboard
Power Supply	Zalman 750w
Software	Windows 7

System Name	Machine XV
Processor	Dual Xeon E5 2670 V3 Turbo unlocked
Motherboard	Kllisre X99 Dual
Cooling	120mm heatsink
Memory	64gb DDR4 ECC
Video Card(s)	RX 480 4Gb
Storage	1Tb NVME SSD
Display(s)	19" + 23" + 17"
Case	ATX
Audio Device(s)	XFi xtreme USB
Power Supply	800W
Software	Windows 10

System Name	SINNAH
Processor	AMD Phenom II x4 955 3.8ghz AIR
Motherboard	ASUS M4A79XTD EVO
Cooling	3 fans of MADNESS
Memory	4GB ADATA XPG DDR3 1600G
Video Card(s)	ATI 4890 1GB GDDR5 memory
Storage	500gb SATAII
Display(s)	23" 1080p Acer H233Hbmid
Case	Antec Three Hundred
Audio Device(s)	Onboard
Power Supply	OCZ StealthXStream / 600W / Active PFC
Software	Windows 7 Professional 64bit

System Name	SINNAH
Processor	AMD Phenom II x4 955 3.8ghz AIR
Motherboard	ASUS M4A79XTD EVO
Cooling	3 fans of MADNESS
Memory	4GB ADATA XPG DDR3 1600G
Video Card(s)	ATI 4890 1GB GDDR5 memory
Storage	500gb SATAII
Display(s)	23" 1080p Acer H233Hbmid
Case	Antec Three Hundred
Audio Device(s)	Onboard
Power Supply	OCZ StealthXStream / 600W / Active PFC
Software	Windows 7 Professional 64bit

System Name	Machine XV
Processor	Dual Xeon E5 2670 V3 Turbo unlocked
Motherboard	Kllisre X99 Dual
Cooling	120mm heatsink
Memory	64gb DDR4 ECC
Video Card(s)	RX 480 4Gb
Storage	1Tb NVME SSD
Display(s)	19" + 23" + 17"
Case	ATX
Audio Device(s)	XFi xtreme USB
Power Supply	800W
Software	Windows 10

System Name	Rocinante
Processor	I9 14900KS
Motherboard	EVGA z690 Dark KINGPIN (modded BIOS)
Cooling	EK-AIO Elite 360 D-RGB
Memory	64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s)	MSI SUPRIM Liquid X 4090
Storage	1x 500GB 980 Pro \| 1x 1TB 980 Pro \| 1x 8TB Corsair MP400
Display(s)	Odyssey OLED G9 G95SC
Case	Lian Li o11 Evo Dynamic White
Audio Device(s)	Moondrop S8's on Schiit Hel 2e
Power Supply	Bequiet! Power Pro 12 1500w
Mouse	Lamzu Atlantis mini (White)
Keyboard	Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD	Quest 3
Software	Windows 11
Benchmark Scores	I dont have time for that.

a little chipped part from VGA board !!!

Beny-Nvidia

Guest

New Member

Beny-Nvidia

Guest

New Member

Beny-Nvidia

Guest

Beny-Nvidia

Guest

Beny-Nvidia

Guest

Beny-Nvidia

Guest

Beny-Nvidia

Guest

New Member

Beny-Nvidia

Guest

Super Dainty Moderator

New Member

Super Dainty Moderator

Beny-Nvidia

Guest

Beny-Nvidia

Guest

Super Dainty Moderator

Beny-Nvidia

Guest

Super Dainty Moderator