• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Tempest under water

Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
So, the time has come to start my journey into the world of water cooling. This log will be a way for me to get help from the great community here, and also to keep track of what I've done.

I really want to keep the whole system inside the case, even if that'll raise the temps a little.

I've got a pump, gpu-block and barbs coming from MoonPig (thanks mate), and this is the shopping list I've thought of:

Btw, how much hose is enough for the loop? Any other ideas?



The idea was to remove the two hdd cages from the front and mount the MCR220 there in a push-pull config.
The Xtreme would go on to the top where Tempest has holes to mount it.
I don't know about the fans yet, maybe try with the og 140mm first.

I was thinking about the loop to be: res-pump-lower rad-cpu-upper rad-gpu-res
Any good?
 

Th0rn0

New Member
Joined
Mar 7, 2009
Messages
422 (0.08/day)
Location
Yorkshire, UK
System Name tehHulk
Processor Phenom II x4 955 @ 4ghz
Motherboard Asus M4A79
Cooling Heatkiller v3, MP220 Rad
Memory 8 gig DDR2 PC6400 Crucial Ballistix
Video Card(s) X2 ATI HD5770 1Gig
Storage 500 gig main, X2 300 gig and 250 gig media, 120 gig external (pron)
Display(s) x3 19" widescreen @ 1440x900 Each And a 17" widescreen @ 1280x800
Case NZXT Tempest
Audio Device(s) On board
Power Supply OCZ Stealth 600w
Software Windows 7 RC1 64bit
Benchmark Scores 15000 3DMark06
Sounds good to me. Looking forward to seeing how this one pans out. Out of interest, where you putting the HDDs? The only thing that put me off mounting the rad to the front was that I hae 4 HDDs there
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
I only have one hdd at the moment, so I figured I'd put it to a 5.25" slot with the adapters that are first in the list.
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
Allrighty,

I got the rest of my stuff in today :rockout: Unfortunately I won't be installing before maybe sunday, since I still need to get the fluids and work a bit.

Enough talk, here are a few pictures:

All together:


Top: NexXxoS Xtreme II 240, Bottom: Swiftech MCR220 - QP Stack 240


Xilence Pro Fans, seem to push nice amounts of air and are nice and quiet.


Top: EK HD4870 Waterblock, Bottom: Watercool HK 775 3.0 LC


Dtek DB-1 pump, XSPC Bay res, Alphacool 1/2' ID tubing, Various Barbs


That's that.

Now I need some water. The impression I've got is that distilled water with pure silver is a good way to go.
Now the question is, is deionized (battery water) ok, or should I get distilled (non-deionized, pharmacy stuff) water the way to go?

Comments?
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
Distilled water only without any addon fluids as I call it will not prevent algae growing. Trust me *cough* I believe aquatuning has some fluids that you can mix with distilled water.
 

SummerDays

New Member
Joined
Dec 8, 2009
Messages
276 (0.05/day)
Is that a 4870 waterblock for only $10 Euros?!

Btw, any bottled water from Pepsi or Coke will be distilled with 0 ppm minerals.

You don't need to buy the fancy stuff, just check the label.
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
Joined
Nov 26, 2008
Messages
4,251 (0.76/day)
Location
California
System Name New Build - Oct. 2021
Processor Intel i7 10700k
Motherboard Asus TUF Gaming H570-PRO
Cooling Corsair H100i
Memory Corsair Vengence 16gb 3600 mhz
Video Card(s) Gigabyte RTX 3060ti 8gb
Storage 1Tb Samsung 970 EVO NvMe m.2
Display(s) 27" LG Ultragear 144hz
Case Fractal Design- Meshify 2
Audio Device(s) Onborad dts
Power Supply Corsair RX 650 W
Mouse Roccat Kiro
Keyboard Razer Tarantula
Software Windows 10 Home x64
That is going to be awesome! I am in the process of water cooling my Tempest as well;)I will just be running a single cpu loop. How do you plan on fitting those two rads inside the case? What will your configuration be?
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
The idea was to remove the two hdd cages from the front and mount the MCR220 there in a push-pull config.
The Xtreme would go on to the top where Tempest has holes to mount it.

i was thinking of trying the front in push-pull with the Xilence fans and the top with the 2x140mm in push, if I can fit fans there (which I don't think I can) then it'll be push-pull too.
I know this setup puts a lot of warm air in the case, but I'm quite sure it'll be blown out the back via positive air pressure.

I was thinking about the loop to be: res-pump-lower rad-cpu-upper rad-gpu-res

The order is a bit iffy at the moment. The tubes are quite thick walled and that might cause problems.
 

Th0rn0

New Member
Joined
Mar 7, 2009
Messages
422 (0.08/day)
Location
Yorkshire, UK
System Name tehHulk
Processor Phenom II x4 955 @ 4ghz
Motherboard Asus M4A79
Cooling Heatkiller v3, MP220 Rad
Memory 8 gig DDR2 PC6400 Crucial Ballistix
Video Card(s) X2 ATI HD5770 1Gig
Storage 500 gig main, X2 300 gig and 250 gig media, 120 gig external (pron)
Display(s) x3 19" widescreen @ 1440x900 Each And a 17" widescreen @ 1280x800
Case NZXT Tempest
Audio Device(s) On board
Power Supply OCZ Stealth 600w
Software Windows 7 RC1 64bit
Benchmark Scores 15000 3DMark06
Parts looking good :)

I'm planning on water cooling both my 5770s soon with a extra rad :)
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
Parts looking good :)

I'm planning on water cooling both my 5770s soon with a extra rad :)

Were you planning on mounting the second rad outside?

The 5xxx cards seem to be cool so you shouldn't have any problems with them.
You were going to add them to the same loop right?
 
Joined
Apr 17, 2008
Messages
3,935 (0.68/day)
Location
West Chester, OH
If you plan on using distilled water, use PT Nuke to help prevent algae and bacteria growth.
 

Th0rn0

New Member
Joined
Mar 7, 2009
Messages
422 (0.08/day)
Location
Yorkshire, UK
System Name tehHulk
Processor Phenom II x4 955 @ 4ghz
Motherboard Asus M4A79
Cooling Heatkiller v3, MP220 Rad
Memory 8 gig DDR2 PC6400 Crucial Ballistix
Video Card(s) X2 ATI HD5770 1Gig
Storage 500 gig main, X2 300 gig and 250 gig media, 120 gig external (pron)
Display(s) x3 19" widescreen @ 1440x900 Each And a 17" widescreen @ 1280x800
Case NZXT Tempest
Audio Device(s) On board
Power Supply OCZ Stealth 600w
Software Windows 7 RC1 64bit
Benchmark Scores 15000 3DMark06
Were you planning on mounting the second rad outside?

The 5xxx cards seem to be cool so you shouldn't have any problems with them.
You were going to add them to the same loop right?


Same loop just a second rad mounted at the front of my case on the inside. I have a pet hate for external rads unless they are done really well. But having 4 HDs is hard to re locate.
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
But having 4 HDs is hard to re locate.

That's why I was asking. I'll have to see what I do with just my one HDD.
Since there are only 3 5,25" slots and that's where I intended to mount the HDD.
I currently have a DVD drive and a fan controller there.
The res is going to take one slot and the HDD would take one too.

I didn't realize there wasn't enough space for all thing when I chose the res :eek:
Maybe I'll get rid of the fan controller or just mount the HDD on the bottom somehow.
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
this should be fun :D Subscribed :toast:
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
I didn't have the energy to do anything today. I've been working two nights in a row so today was a movies and sofa day. Tomorrow I'll be going to my parents for the xmas so the project will have to wait until around boxing day.

Next week I'll do some paint mockups of how I was thinking of the tubing to go.
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
This is how I was planning on running the loop. This way both rads would get cool air and both cpu and vga get chilled water straight from rad. Comments?

I know the case temps will rise, but I don't think that'll be such a problem since important components are on water.

 
Joined
Oct 10, 2008
Messages
3,471 (0.61/day)
System Name Acer Aspire V3-771G-53218G75Maii
Processor Core i5 3210M (2,5-3,1Ghz)
Memory 8GB DDR3 SODIMM
Video Card(s) Geforce GT650M
Storage Samsung 830 256GB - 750GB Toshiba drive
Software Windows 7 x64 Home Premium (non-acer-bloatware)
Let your rad fans blow up instead of down, because:
- Hot air rises, blowing up removes it from the case
- Blowing cold air through a rad heats the air up, so you're blowing slightly warmed air into your case

Next, I'd say put your VGA before the rad, so you can get rid of the VGA's heat as well. Otherwise you're warming up your loop a lot quicker. I'd do it like:

Pump, CPU, RAD, VGA, RAD, Res and back to pump

EDIT: pump, RAD, CPU, RAD, VGA, Res and back to pump wouldn't be bad, I just noticed you're putting the water through a rad before hitting any heated component :D
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
Yep, I was thinking it's good to do it in that order, since the warm water shouln't matter in the res and pump?

I debated the top fans with myself, which is better, pushing cold air in to the rad, or going with the natural rising of heat? Maybe I'll just try both ways, and then determine which way I'll go.
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
Pushing has always worked Better for me, bur of course depending on configuration things can change.
 
Joined
Oct 10, 2008
Messages
3,471 (0.61/day)
System Name Acer Aspire V3-771G-53218G75Maii
Processor Core i5 3210M (2,5-3,1Ghz)
Memory 8GB DDR3 SODIMM
Video Card(s) Geforce GT650M
Storage Samsung 830 256GB - 750GB Toshiba drive
Software Windows 7 x64 Home Premium (non-acer-bloatware)
Yep, I was thinking it's good to do it in that order, since the warm water shouln't matter in the res and pump?

I debated the top fans with myself, which is better, pushing cold air in to the rad, or going with the natural rising of heat? Maybe I'll just try both ways, and then determine which way I'll go.

Either way, 5 intake vs 1 outtake seems kind of unbalanced to me... 3 intake, 3 outtake would be my preference. My educated guess is top outtakes win.

But testing says more than theory obviously :)
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
I currently have 5 in and 1 out and it gives me better temps. Right now it helps that the cpu gets cool air straight. Besides, if more air comes in than is sucked out, the rest finds a way out, for example through pci slots and other holes in the back (positive air pressure).

But as we both said, well see :)
 

BUCK NASTY

4P Enthusiust
Joined
Aug 8, 2007
Messages
4,974 (0.82/day)
Location
Port St Lucie, FL. U.S.A.
System Name Main Rig
Processor AMD FX-4130 @ 4.8Ghz
Motherboard ASUS M5A99X Evo
Cooling Coolermaster Hyper 212+
Memory 8GB GSkill DDR3 1600
Video Card(s) ASUS GTX 970 Strix @ 1503Mhz Core
Storage Corsair Force 90gb SSD/ WD Caviar Blue 750gb
Display(s) ASUS 24" IPS
Case Coolermaster Centurion 590
Audio Device(s) Onboard
Power Supply Antec TP750 80+
Software Windows 7 Ultimate 64
Following this thread to see if I can improve the WC in my Tempest. Currently have MCR220 mounted to inside top of case with 2-140mm pulling. have you mounted the rad in front of the HDD yet?
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
No, all the stuff is ready, just waiting for me to have time to build the thing. Got distilled water and hose clamps today, so everything is set. Maybe I'll have time in the weekend.

I'm hoping the rad will fit straight to the front without any drilling, but we'll see.
 

@RaXxaa@

New Member
Joined
Jun 29, 2009
Messages
473 (0.09/day)
Location
Pakistan & US
System Name ROG
Processor AMD PhenomII X6 1090T 3.2-4.0 GHZ
Motherboard Crosshair IV Formula
Cooling Thermaltake Frio
Memory OCZ Gold 1333 4GB
Video Card(s) XFX Radeon HD 5850
Storage 1000GB SeaGate Sata
Case Thermaltake V4
Audio Device(s) Built in
Power Supply OCZ Modextreme 700W
Software Win7 & Win2k8 server
Benchmark Scores Almost 20300 in 3D 06 6.9 IN Cinebench 11.5 CPU Score
Why going distilled. last i remember distilled watter can cause heavy rusting or something, maybe iam wrong but again. i think you should go for a coolant that is non rusting and has no electrical conductivity, so if any leaks happen it wont damage any equipment
 
Top